AJAX :: 4.0 ModalPopupExtender Pops Under?
Apr 23, 2010
using a modalPopupExtender inside an UpdatePanel (the popup control is a Panel), the popup acts normal (renders on top) using the modalPopupExtender.show() command to display. If you cancel the popup, the next popup will be under the other controls on your page. I have another modalPopupExtender which is not being displayed through the show command but is activated by another control. This one works normally. So something is going on with the show() function inside an UpdatePanel. If I remove the UpdatePanel, both popups work normally.
View 2 Replies
Similar Messages:
Mar 8, 2010
I have scriptmanager on master page and on content page I have update panel inside tabcontainer.
In update panel I have gridview. I have added modal popup to Delete linkbutton. When Item is deleted I give confirmation that item is deleted. When this alert pops up, again modal popup pops up. I have 4 tab panels in tab container and 3 of it have update panel with gridview. This is happening on each tab panel.
Earlier I was using scriptmanager on content page. Then I realised that I'm adding scriptmanager to every content page, so I placed it in master page.
View 6 Replies
Feb 5, 2010
I added a button on my website and tried to use confirmbuttonextender. I inserted it and enabled it on the button but when I run the application and click the button, the page just posts back, no pop up message or anything comes up. What would cause this? I don't get any errors
<asp:Button ID="Button1" runat="server" Text="Button" />
<asp:ConfirmButtonExtender ID="Button1_ConfirmButtonExtender" runat="server"
ConfirmOnFormSubmit="True"
ConfirmText="Once data has been updated, it can't be retreived" Enabled="True"
TargetControlID="Button1">
</asp:ConfirmButtonExtender>
View 20 Replies
Jan 12, 2010
I'm having problems with the calendar extendar on my textbox popping up when any event fires on the page.I didn't start having this issue until i implemented a second extend (MaskEdit) to my textbox, when i eliminated the (MaskedEdit) the issue still occured. '
<tr>
<td>
<asp:Label ID="startDateLab" runat="server">Start Date: </asp:Label>
[code]...
View 6 Replies
Apr 14, 2010
I have a DataList that contains some Thumbnail Image(Image Button).
Now I want when i click on any Item in datalist the original image come in modalpopupextender.
How I can do this?
<asp:DataList
ID="dlImgGallery"
runat="server"
RepeatColumns="3"
Width="100%"
onselectedindexchanged="dlImgGallery_SelectedIndexChanged"
DataKeyField="Id"
>
<ItemTemplate> <table
style="width:100%;">
<tr>
<td
></td>
<td
class="style3">
<asp:ImageButton
ID="ImageButton1"
runat="server"
ImageUrl='<%# Eval("Img_URL") %>'
BorderColor="#0098DB"
BorderStyle="Double"
BorderWidth="3px"
onclick="ImageButton1_Click1"
/>
</td>
<td
class="style3">
</td>
</tr>
</table> <br
/>
<cc1:ModalPopupExtender
ID="mpe"
runat="server"
BackgroundCssClass="ModalBackColor"
TargetControlID="ImageButton1"
PopupControlID="Panel8"
CancelControlID="btnCancel"
ondatabinding="mpe_DataBinding">
</cc1:ModalPopupExtender>
</ItemTemplate>
</asp:DataList>and
my panel that shows as modalpopu
<
asp:Panel
ID="Panel8"
runat="server"
onload
="Panel8_Load">
<asp:Button
ID="btnCancel"
runat="server"
Text="Cancel"
/>
<br
/>
<asp:Image
ID="Image1"
runat="server"
Height="102px"
Width="124px"
/>
</asp:Panel>
Now where I can to write code that when i click on item in datalist Original Image show in modal popup extender?
View 3 Replies
Apr 7, 2010
I would really appreciate if someone can find out what's wrong with this code.
Here is my question. I have textboxes in a modal popup extender (City, state, zip) and there is an image button search for searching the address from the database. All this functionality is within a control (.ascx file). This control is added to the page where it needs to be displayed and is being displayed when a user click the Address button (the code for it is not shown here). The method ShowAddressSearch() in the control is being called from the page and it displays the popup.
When the user enters any of the 3 values and hits search a server event is fired up and the result should be displayed in a grid. What is happening is, when the user hits the search button the server call is made and the data fetched from the db but the modal popup closes itself here is the code for this. I would really appreciate if someone can find out where and how popup is getting closed.
[Code]....
View 1 Replies
Sep 3, 2010
I have a modal popup extender with one control (ascx) this control has a label that on onclic method call other popup extender.
It's has other ascx, it's has a button for a search. When I do Click in this button in first time, the event click not fired and there are a javascript error that say "this._activeDRagVisual is null reference".
In the other hand, If a use de second popup inside an asp page the event and control work correctly. The problem is with the popup inside popup.
View 3 Replies
Sep 10, 2010
In my windows application I'm loading more than 100 urls in my web browser control one by one in a for loop and need to print them programatically after each URL gets loaded . But, I keep getting the Javascript error for so many URLs. I'm not sure why this error keep coming.
View 2 Replies
Apr 4, 2011
I have a gridview inside a ModalPopUpExtender, the grid view have the button add delete and edit when i clic one of the button of the gridview the popup is closed. I wont to close the popup when the close button is clicked.This is the asp.net part:
< cc1: ModalPopupExtender ID="NamePopup" runat="server" PopupControlID="OptionPanel" TargetControlID="btnD" BackgroundCssClass="mpBg" DropShadow="true" OkControlID="btnSavePopup" CancelControlID="btnPostCancel" >
< / cc1:ModalPopupExtender>
View 1 Replies
Feb 5, 2010
I try I cannot seem to find a satisfactory solution. As far as I can tell from the documentation a ModalPopupExtender should be able to reside inside an UpdatePanel. However, I simply cannot get it to work.After the first refresh of the UpdatePanel I get errors of various kinds depending on what I've tried.
What I'm trying to accomplish is having a button inside an UpdatePanel which launches a popup. Another button inside the UpdatePanel causes a partial postback. And finally a button within the popup has to cause a partial postback. I have tried at least five different approaches to this problem and finally I gave up and went with a very inelegant solution. I don't think my requirements are all that strange, am I doing something wrong?
First I tried this:
[code]....
This works fine until after the first postback when the Cancel-button (Button4) starts causing synchronous postbacks and the textbox starts to fill up with commas. I also tried the same as above but placing an UpdatePanel within Panel4 (the popup) - no go. Then I tried causing the postbacks in javascript launched from the ModalPopupExtender's OnOkScript - still it starts failing. I tried another couple of attempts
all of which failed. Finally I decided to move the ModalPopupExtender outside the UpdatePanel, add dummy buttons and a bit of javascript to launch and hide the popup. Although this satisfies my UI requirements it just plain wrong from a design perspective and it annoys me that I could not get the extender to work inside an UpdatePanel. Has anyone succeded with placing a ModalPopupExtender in an UpdatePanel with the requirements I stated above? Or should it be added to the list of controls that's just not compatible with the UpdatePanel?
this is my final solution:
[Code]....
View 8 Replies
Dec 11, 2010
i try to develop a login control with modlpopupextender within usercontrol. i have a problem with hiding modalpopupextender. i indicate that if i put modalpopupextender in aspx page directly it works, but when using in usercontrol it doesn't. my codes are:
[Code]....
[Code]....
i show modalcontrol on masterpage. it is ok. i click btniptal,modalcontrol hides. but after click the btniptal, if i refresh the page(postback) modalcontrol shows again. i said this above that if i put modalcontrol directly masterpage ,thing that i said doesn't happen. how can i solve this.
[Code]....
View 4 Replies
Mar 20, 2010
I have ValidationSummary in masterpage out of UpdatePanel and inside updatePanel i have my ContentPanel. I have an user control where iam having Save button which iam using in all my pages of application. Now i have a requirement like i need to show the validation summary in ModalPopUpExtender.
View 1 Replies
Jun 30, 2010
We use a ModalPopupExtender and set the PopupDragHandleID so it can be dragged around the browser.
This works great in most browsers; however one control that is loaded in the ModalPopup is wrapped in a scrollable div, and in Safari when you click on the scrollbar and then move the mouse it starts dragging the modal popup around.
I was hoping someone either has a fix for this issue, OR knows how to detect the browser in either css or javascript and remove the PopupDragHandleID.
View 5 Replies
Feb 9, 2010
I think I've found a bug in the ModalPopupExtender. Here is the details:
Problem
When you use ModalPopupExtender within an UpdatePanel, the controls in the PopupControl (the Panel containing the content needs to be poped up) will be rendered, even though the NamingContainer (or the parent) of the ModalPopupExtender and the PopupControl is set to invisible. This may cause Event Validation error between AsynPostBacks. Cause
The controls in the PopupControl will not be rendered within the UpdatePanel, but at the bottom of the page outside the UpdatePanel. When the NamingContainer of the PopupControl and the ModalPopupExtender is set to invisible, the content outside the UpdatePanel won't be updated and therefore stays on the page.
Code
Default.aspx
[Code]....
Steps to reproduce the problem
Create a simple ASP.NET web application in VS using the code provided aboveRun the app in debug modeClick on button Show 1, and then click the link button Show. The popup panel should show up. Click either
OK or Cancel to close out the popup panel.Click on button Show 2. You will see the content in the popup panel is displayed at the bottom of the page. However, the content should be invisible and should not be rendered, or should be removed from the page.Click on button Show 1 again. You will see the familar error message: Sys.WebForms.PageRequestManagerServerErrorException: Invalid postback or callback argument...
Further explaination
This error has nothing to do with the ViewState. When button Show 1 is clicked the second time, the page will try to load data (including ViewState, PostData and Session) into the controls on the page before btn1_Click is called. At this moment, pnl1 is still invisible, so the page will only try to load the data for the controls in pnl2. However, if you check the Request.Form.AllKeys in the watch window, the TextBox
txt is part of the PostData. This doesn't match any control in pnl2, and then the exception is thrown.
I have tried many different ways, but none of them worked.
View 4 Replies
Mar 15, 2010
in my c# code i have the following;
ModalPopupExtender2.Show();
This works fine my popup appears, so i put an ok button on the Panel and on_click in the code file i tried to;
ModalPopupExtender2.hide();
But it dosent work - nothing happens. I dont have it in an update panel.
View 1 Replies
Sep 12, 2010
UpdatePanelAnimationExtender in ModalPopUpExtender leads to a white/blank screen in IE. Works flawlessly in FF and Chrome.
I already tested <FadeIn Duration="0.5" Fps="50" forceLayoutInIE="true" />
View 5 Replies
Nov 30, 2010
I am developing a web portal under ASP.Net 4 and using Ajax and masterpage. I created a user control to select a data from a gridview and put it in a textbox, for that use the ModalPopupExtender control. Everything works fine as can be seen in this photo:
http://www.laneros.com/attachment.php?attachmentid=185893&d=1290707244
But after much control to use the ModalPopupExtender starts to appear behind the form and to return to appear before touching refresh the page or press the button repeatedly calling him. In the next picture you can see what it looks behind the popup form:
http://www.laneros.com/attachment.php?attachmentid=185894&d=1290707443
Si alguien me puede echar una mano para evitar esta situación se lo agradecerÃa mucho.
View 3 Replies
Mar 12, 2010
I've been prototyping the use of the ModalPopUpExtender but find that the BackgroundcssClass fills the entire screen even though I have defined the width and height. So when I click on link button the popup fills the entire window and the X/Y positioning has no effect. Other than that the content displays fine. Any thoughts on this issue?
[Code]....
[Code]....
View 5 Replies
Sep 30, 2010
Am trying to get a modalpopupextender working, and it's driving me insane. I can get the popup to show, but it fills the whole browser. How do you set the size of the popup?
Here is my code:
[Code]....
Also the popup is not transparent, how do I make it so. The css I am using for the popup is as follows:
[Code]....
View 2 Replies
Mar 1, 2011
I have a user control with OutputCache set to vary by any param (*). This user control has a LinkButton, which when clicked, causes a postback, and displays a ModalPopupExtender (the extender's TargetControlID is a dummy link). The user control is included on an aspx page.
The LinkButton is displaying the popup just fine. But if I open another browser tab/window/type, the LinkButton fails to generate the popup. I've tried (all separately):
moving the popup extender and its associated control to the main aspx page use OutputCache Location="None" on main page dynamically create the Popup extender and its associated control in Page_Init of both ascx and aspx
View 2 Replies
Feb 4, 2010
I have created a panel with a CheckListBox populated from a SQL datasource, an OK and Cancel button. I have set up the OnOKscript to work and I can click the OK button and populate a label on the page. On the OK click I want to get the selected Checkboxlist values.In the page I have added this
<script
type="text/javascript
function SaveRREData() {
[code]...
View 2 Replies
Jul 15, 2010
Am using ModalPopupExtender (In VS 2005 ). But it doesnot showing it when i use in SSL.
View 2 Replies
Aug 4, 2010
I want to set focus on a textbox inside the modal popup extender when it is visible.
View 3 Replies
Sep 10, 2010
I have a typical frameset page that separate the page into Top, Left and Main. I want to add modalpopupextender on the frameset page so that it covers the WHOLE SCREEN.------------- Default.aspx file ---------------
<form id="form1" runat="server">
<div>
<div style="display: none">
[code]...
View 3 Replies
Sep 9, 2010
I have a gridview with a template field containing a Button and a modal popup extender. I would like to populate the panel with the information from the row ... is there any way to do this?
View 3 Replies
