In my application, I am using different user control for different tasks. I used an update panel to load user controls with ajax. It is working fine. I am using some other update panels inside the user controls. My problem is, the inner update panel(UpdatePanel placed inside the user control) is not working properly.
I have a simple aspx page created using VS2010, having a master and a content page. I have added the ScriptManager from AJAXControlToolkit on the master page and an update panel on the content page. Essentially clicking a link button should display a popup box through the PopupControlExtender. The issue I am facing is that eventhough I have AJAXified the page, clicking the Linkbutton (named lnkFlag) doesn't do partial update, instead it makes full page postback. This could be infered by the fact that both the lblOut and lblIn labels are updated with the server's time. If there is a partial page postback then lblOut should not be updated, since it is outside the UpdatePanel.
I have a panel (say, panel1) inside another panel (say, outer-panel)….The panel1 is visible only when a checkbox is checked in the outer-panel. I am using ajax update panel to do this. Now I have many text boxes in the panel1. I have to put a validation on all the boxes.
I tried to test this by putting validation on 2 boxes and this works fine on my local machine. When I put the same logic on the server, it does not. Of course the page on my local machine has fewer text boxes compared to the page on server. But I do not understand why the same logic works on my local machine and does not work on the server. I did try to put a validation group, but of no use.The page on the sever is a very long one and also it has a captcha control….. when ever I try not to enter text in one the text boxes which has validation and then hit submit…it redirects me to another page with out prompting for the validation error.
I am building a website using ASP.net ajax. there are 3 <asp:panel> controls in the page and each contains a number of dynamic linkbuttons. these panels are contained in a <asp:updatepanel> control the page_load event fills out the first panel with linkbuttons and assigns cooresponding commandName commandArgument for them, that works. then the first panel's linkbuttons triggers the command and fill out the second panel with linkbuttons, that works too. then the seond panel's linkbuttons are supposed to fill out the third panel with linkbuttons, but that doesn't work anymore, and it seems like doing the page_load event again and filling out the first panel and the second panel's linkbuttons disppear, just like the first time the page is loaded.
my code is very simple. I have one updatepanel, it has one lable and one dropdownlist. everytime, dropdownlist index changed. Label shows selected value. if you select any options besides the first one, it works. if you go back to the first option, then event will not get fired. spending hrs searching on google, couldn't find anything useful.
I'm finding that the scriptmanager and the updatepanel and basic implementations of AJAX for ASP.NET. I'm just wondering whether these were required to use AJAX and partial page update and referencing handlers such as button1_click on the server code page ?
Also if i can ask another question, I'm also wanting to know whether the updatepanel can support feed-in like facebook ? What I'm wanting to do is have something that updates the screen (like the update panel), and items within this panel contains links. When the user clicks on the link it shows a modal div, giving the user options to do some updates. Once the user clicks submit, then this makes a call to the server to update the details then also update the panel. Within the panel I also want to move some of the div elements using javascript (causing the drag and drops to save to the database).
I have one button and one textbox inside a updatepanel. On button click I am adding an alert script. But when I use the ViewSource by right clicking on the page, then the alert script is not generated.
[Code]....
[Code]....
But if I remove the the UpdatePanel then the script is generated and the alert message is displayed. What should I do to register the script when using updatepanel.
I know that there are hundreds of posts out there on this problem, but I have tried everything (I think) and I still have not resolved it. If I remove the update panel everything works fine.
I have a ReportViewer with drillthrough function report and it takes 3 mins to run the report on buttonclick.So I have enclosed ReportViewer with AJAX update panel and give a wait.gif ProgressTemplate. After this change onbuttonclick now the wait gif appears and then the report displayed as desired after 3 mins. However, now the drilldown function of the report is not working anymore and view error it says "ClientReportxaxsaacscdcsdci678686 is not defined.
I have a Submit button and some functionality like updating DB and fetching next page in the button click event. This process takes a long time and I want to display a message saying "Progress...." right after clicking the botton. I want to do the same in 20 other pages. So, best way to do it wd be to put the modalpopup MPE or an Updateprogress in a usercontrol or in master page. I first tried putting both of these on the page itself to test and see and neither worked.
I tried using Update progress control with a dummy updatepanel and giving the Submit button as Asyntrigger to the dummy updatepanel. I have also tried using MPE but it didnt work either. Below is an example of what i did..
We have an updatepanel in our site and there are a number of linkbuttons in it. Please note that the site works fine in all browsers without proxy the proxy changes the url from for instance [URL] to 0-[URL] it also works fine in all browsers but IE the issue is that under proxy and in IE8, it gives an error when clicking one of the linkbuttons, the error message is "Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; InfoPath.1; .NET4.0C; .NET4.0E) Timestamp: Sun, 13 Mar 2011 20:38:58 UTC
Message: Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near ' <!DOCTYPE html PUB'.
Line: 4674 Char: 21 Code: 0"
I have no idea what goes wrong here, it seems that IE can't parse the response?
I ahve an update panel that is in my MasterPage, I have put a login panel which includes my login/anonymous views in my update panel. I have added the triggers parameter and I am getting an error. here is the code:
[Code]....
Here is the error I am getting:
A control with ID 'LoginButtonHDR' could not be found for the trigger in UpdatePanel 'UpdatePanel1'.
Description:
An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.InvalidOperationException: A control with ID 'LoginButtonHDR' could not be found for the trigger in UpdatePanel 'UpdatePanel1'.
How can I work with Download functionality with Updatepanel. Here I am placing download code.
string fileName = Convert.ToString(e.CommandArgument); if (fileName != "") {
[code]...
I am calling this function from a Grid in Updatepanel. When I click on Download image in a grid column, no action is taking place. Plz find a solutions for me.
The first one is visible by default, the 2nd gets visible when pressing a button in the first panel.
[Code]....
So when i press the ButtonNbestelling, following code gets executed:
[Code]....
This is all going fine, But now on Panel2, i am unable to click on the buttons IF I remove the updatePanel: UpdatePanelPages from my masterpage then all is working fine ?
The following is not working (does a full postback). Note: HTML tags inside updatepanel. We can' t have HTML tags inside updatepanel? If so, what's the work around?
I have updatePanel in my ASP.NET 2.0 (migrated from ASP.NET 1.1) web app. It doesn't work as it always postback instead of callback. I already set<xhtmlConformance mode="Transitional" /> but still not working. Previously, it just working.
I have a 2 level gridview and updatepanel for each gridview. I have added a UpdatePanelAnimationExtender control at the end. It works for the top level grid/updatepanel. How can I make it also work for Child panel? I am not sure where to add it and how to set it up. I want to see the image at the center of each child grid if user do sort/paging. fyi, I have codebehind for rowdatabound and rowcommand. Here is my aspx code:
I want to uplaod my images into the database.it works fine if my images are inserted into the database on postback,but when i put my FileUpload control in UpdatePanel the FileUpload.PostedFile property shows NULL.remember my scriptmanager tag is in master page.
I have an extra asp.net label to show success or error message after the add, update or delete a row, but using the BlockUI, I am unable to do it, cause the label is somehow not refresh even if i put it under the BlockUI.
I have used updatepanel in asp.net 3.5 framework . It is running good in localhost but when i upload it into server which is not working as usual whole page is loading.
I have populated my data using DataRepeater Control and i have a Delete button on that so each and every row has a delete button which allows user to delete a single entry from DB. I have put this control inside UpdatePanel so i can avoid full page postback.
When i delete the row from the database and try to show a alert message using Repsonse.Write it throws me the below error message
Error: Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near 'itle||Untitled Page|<script language='ja'. Source File: [URL]
But, If i remove my update panel its coming up well, is there any solution so i can show alert box after a row been deleted ?