AJAX :: Microsoft JScript Runtime Error: Sys.WebForms.PageRequestManagerServerErrorException?
Mar 2, 2011
I am using Ajax Combobox's in my application. The controls are re-created dynamically on page_load after postback. But I keep receiving this error when selecting an item from the ajax combobox when i run the application.Microsoft JScript runtime error: Sys.WebForms.PageRequestManagerServerErrorException: Script controls may not be registered after PreRender.My Master_Page...
[Code]....
My .aspx page (Content_Page)...
[Code]....
I had done the above methods based on other posts but it still does not resolve the issue. I must be missing something simple,
We have used Ajax toolkit combo box in one of our application. We have used two Ajax toolkit combo box in an aspx page. Both combo boxes are populated while loading the page. Combo box 1 has list of items and based on combo 1 selection, combo box 2 is populated. This requirement is implemented within the updatepanel and only partial page rendering is done on combo box 1 selection.
This is working fine when the list of items are populated at the time of page load.
We have provided an option to add new item in combo box 1 and combo box 2. When new item is added in combo box 1, it calls iteminserted event. Since it is a new item, it does not have corresponding items in combo box 2. When we add new item in combo box 2 it submits the page (partial rendering). While it gets submitted it throws following JScript error.
"Microsoft JScript runtime error:
Sys.WebForms.PageRequestManagerServerErrorException: '<combo box id>' has a SelectedIndex which is invalid because it does not exist in the list of items.
I used the following function in my ASP.Net Project (which contains ajax controls)
[Code]....
Microsoft JScript runtime error: Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.
I searched online for solution and got to know its the problem of asp.net ajax. None of solutions (that I found like Add EnableViewState=false, etc.) worked for me.
To demonstrate my issue in ver simple. I have a button in Ajax updatepanel section. When i try to call the script from button click event i am getting the following error.
[Code]....
[Code]....
My error code is..
Microsoft JScript runtime error: Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near '<Script Language = ''.
I have created an AJAX Server Control Extender which uses the Sys.Timer-object in the client behavior. It worked at first, but suddenly I started to get "Microsoft JScript runtime error: Object expected" when running the page with the extender. When debugging, I see that the line - this._timer = new Sys.Timer(); - in my .js-file which fires the error is the bold line in this function:
when I run my site that used Slideshow Extender, i get this Error:
Microsoft JScript runtime error: Sys.InvalidOperationException: Can't add a handler for the error event using this method. Please set the window.onerror property instead.
in localhost i ignore this Error and Slideshow Extender works correct.
but when i publish the site I have JScript Error and Slideshow Extender not be loaded.
have a problem on my application, i am using LightBox javascript that is using prototype.js library, and when i open any pop up that is having script manager it generate this error:Microsoft JScript runtime error: Sys.InvalidOperationException: The PageRequestManager cannot be initialized more than once.I know that is because i have scriptmanager on the parent page that opened the pop up and its something relates to prototype.js but i dont know the connection!
I am calling above funtion from java script and i am getting above errori have added toolkitscriptmanager on pagei am using .net 2010it works fine for .net 2005i have latest version of ajax tool kit i also tried with ajaxscriptmanager
I have used url routing on my website to route the user to his/her profile page once he has entered username in the url. The whole website runs fine without any problem except for the case after url routing. When a username is typed in the url after the website name then the routed aspx page opens up giving the following error:
Microsoft JScript runtime error: 'WebPartManager' is undefined
In this particular child page i have used a webpartmanager inside an update panel as it is the right approach which i found out over the web. The code used in global.asax file is:
I am getting microsoft jscript runtime error.I am using Ajax extensions(3.5).Yesterday it was working fine but today i am getting this error.In another page i am using script manager there i am not getting error when i try to upload data into database i am getting error.
Microsoft JScript runtime error: AjaxControlToolkit requires ASP.NET Ajax 4.0 scripts. Ensure the correct version of the scripts are referenced. If you are using an ASP.NET ScriptManager, switch to the AjaxScriptManager in System.Web.Ajax.dll, or use the ToolkitScriptManager in AjaxControlToolkit.dll.
I am using ASP.Net 4 and the AjaxControlToolkit .net 4 dll. On my page I am using the ToolkitScriptManager.What I don't understand is that it works without any issue on my development machine in Visual Studio and if I publish it to IIS on that machine. If I run it on another machine I got it also works without any issue. When I copy the published application to my web hosting provider, I am getting this issue.I was getting a SecurityException initially when the site loaded the AjaxToolkit assembly, but now that seems to have just gone away, but I still get this issue.
i'm trying to use the ajax control toolkit but each time i'm trying to run my project i'm getting a:
"Microsoft JScript runtime error: Sys.ArgumentUndefinedException: Value cannot be undefined. Parameter name: type " Error.
if i hit the continue button the page loads but without the functionality of the control,the control that i'm trying to use is the AutoCompleteExtender.
i followed all the video tutorials and read many post about this toolkit but found nothing about this error.
i tried this on both web developr 2008, 2010 and visual studio 2008.
If i allow all users to access this folder or remove this web.config file, then the ajax toolkit works. I need to protect this folder and i am using form authentication. Could someone point me where i went wrong. Kindly keep in mind that i am new to asp.net.
I have a gridview within update panel, in gridview i have footer button to add new row in grid. When i click on footer button to add new row it generate javascript error like "Microsoft JScript runtime error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500 "
Modal not showing up when show is called, also error on loading page. Attaching code below, can anyone help me discover my syntax / logic issues here?
NOTE: Did some research on this before posting, some claimed it can be an issue of where the modal is placed on the page in relation to the update panel I am using. I have tried different placements of the modal extender and I also tried removing the update panel all together in hopes to at least see the modal show, no go...same issue. So with that, the issue shouldnt be around the use of the update panel...
Here is the error: icrosoft JScript runtime error: Sys.ArgumentNullException: Value cannot be null. Parameter name: elements
I am using some AJAX and some JQuery for Login panel animation in Master page.Also in my home page I am using AJAX Tab container.It works fine when I run the application without login.If I logged in I got the following error when I put the breakpoint into my code,
Microsoft JScript runtime error: 'document.getElementById(...)' is null or not an object,It shows at the following Line at the Home[dynamic] page.
I'm Using Ajax POP UP Extender Control ... and The Panel Which will appear in The POP UP Has Data List ... Inside That DataList i have Image Button For Each Item In Data List.... When I click in any Image Button in That DataList ......I Get That Error At run time Microsoft JScript runtime error: 'this._postBackSettings.async' is null or not an object
... My ASPX Code is
[Code]....
And I put that code inside update panel and ToolkitScriptManager
I have tried every single method in almost every post available on both Bing and Google. And I still get this error.I thought it was something in my website or web.config, so I opened up VS2008, selected to create a new ASP.NET Website and let it go..Here is the default.aspx page and web.config created by VS2008. Without modifying anything other than chaning the website properties to .NET 3.5 instead of .Net 2.0, I still get the error on this website when I hit F5. I have other websites with the ajax update panel and script manager on this server that work fine and have tried the web.config from them on a new project. But any new projects still do not work.I have verified that the settings for the working project as well as this new project in IIS are the same. Can anyone tell me why I am getting this error and theSys Undefined error?
I am having problems with an intermitent error in an ASP.Net Ajax enabled website. The error I am receiving is the old faithful "Microsoft JScript runtime error: 'Sys' is undefined" error. Googling this error usually turns up the suggestion to add the correct "httpHandlers" and "httpModules" into the "web.Config" file. The web.config file for this project already has the following lines for those two sections. See below:
[Code]....
The error is intemittent, it sometimes does not present at all when debugging a page, and other times it will present constitently for anything up to a day or so?
BTW, we are using Telerik ajax controls on the page. One of our custom JavaScripts does render before the scriptmanager. ahve tried using both "RadScriptManager1.RegisterClientScriptBlock(...)" and "ClientScript.RegisterClientScriptBlock(...)" but both seem to render the script block above the "Sys.WebForms.PageRequestManager._initialize(...)" line.
i am using urlrewritingnet for url rewriting. at one of my page i am using auto complete extender . it works fine for first page weirdly because also that page is getting url rewriting.
now let me explain you
my normal page is
domain/Pokedex.aspx
here what i do for url rewriting
[Code]....
ok now problem does not happen when i type this : domain/Pokedex.aspx. but i when i type this problem occurs : domain/Pokedex-2 which is equal to domain/Pokedex.aspx?page=2. here is the problem screen shot but when i type this problem does not happen : domain/Pokedex.aspx?page=2 so it is about url rewriting i guess
I have added MaskedEditExtender and MaskedEditValidator controls from the Ajax Toolkit for .NET Framework 4.0 to my textboxes to provide enhanced functionality. However, since I've done that I am getting the following error in Visual Studio when I visit the page containing these controls.
Microsoft JScript runtime error: '2.length' is null or not an object
This is the information from the script page that Visual Studio breaks in.
When I right-click on the tab in Visual Studio and choose "Copy Full Path" it gives this. ^TransientScriptDocument248.aspx
When I hover over the tab in Visual Studio it gives this (as much as I could see in the tooltip). LocationDetail.aspx?_TSM_HiddenField_=ajxToolkitScriptManager_HiddenField&_TSM_CombinedScripts_=;;AjaxControlToolkit,+Version=4.1.40412.0,+Culture=neutral,+PublicKeyToken=28f01b0e84b6d53e:en-US:acfc7575-cdee-46af-964f-5d85d9cdcf92:de1feab2:f2c8e708.....
This is the piece of code from line 21 of the file above, where Visual Studio breaks. if(t.length<n[2].length)
This did not exist before adding these controls to the page. This combined with it mentioning the Ajax Toolkit Script Manager makes me think it is indeed from these controls.
