Authorize A Directory For Anonymous Users IIS 7.5?
Feb 4, 2011
I'm trying to add a directory for anon access in IIS 7.5. It works under Web Dev but not IIS 7.5
I'm currently using this web.config in the directory. This is a directory with style sheets:
<?xml version="1.0"?>
Note: As an alternative to hand editing this file you can use theweb admin tool to configure settings for your application. Use the Website->Asp.Net Configuration option in Visual Studio. A full list of settings and comments can be found in machine.config.comments usually located in WindowsMicrosoft.NetFrameworkv2.xConfig
<configuration>
<appSettings/>
<connectionStrings/>
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</configuration>
Update:
I've went to the folder and under Authentication, I've changed anonymous authentication from IIS_USR to pool. This seems to have correct it.
I will reward anyone who provides a very good explanation and resources for understanding this setting. Also, how to apply it globally would be good to know -- for all folders.
View 2 Replies
Similar Messages:
Feb 5, 2010
I've an application that runs in a localhost.
So I can get the user logon to some recording data or some thing else.
I was thinking if that was possible to put some value in web config that gets the user logon and if that logon is authorizated for that page it let him open else it close the page...
Some one have some idea to accomplish it ?
View 5 Replies
Jan 29, 2010
I have a WCF service that runs in my web application that provides data to a Silverlight application and is defined as follows (with an appropriate .svc file)....
[ServiceContract(Namespace = "")]
[AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)]
public class DispatchService [code]...
The idea is that the user logs into the website and is then authorised for all services. I do not want to have a login aspect to my Silverlight application to authenticate users.Therefore I dont want anyone to be able to call my service who is not authenticated.
Could I...Somehow determine this for each Operation Contract. I had a look inside the OperationContext object but couldnt find anthing that stood out as a way to determine who the user was.Somehow attribute the ServiceContract so that the method can only be used by authorised users?Put something in my web.config to stop unathorised users from being able to access the folder containing the services?
View 1 Replies
May 18, 2010
How can I authorize and authenticate users by roles? I have roles table and user's table, role Id is the primary key in the roles table and foreign key in the user's table.
View 4 Replies
Jul 23, 2012
How to Protect Web services from Un authenticated users.. right now Im Using Protected Access specifiers.. Is it Correct method To Protect Web services?
View 1 Replies
Mar 26, 2010
Need to develop a Web application that will be used to authenticate and authorize internal and external users to log and then re-route to web applications for the organization. The login application should be able to provider smooth integration with any future applications that needs a secured authentication. Should I be using WIF - Claims based Identity/ADFS or asp.net Role membership provider to develop this app.?
View 1 Replies
Sep 22, 2010
I am working on an internal application... i setup IIS 7 to use windows authentication since its behind the firewall and on the domain.. there is a "public" side.. and an "internal" side... if your not part of IT.. you should get the public side.. this is just informational.. my problem is that there is 1 or two pcs that are not on the domain and nobody is logged into them.. how can i just redirect anonymous users to another site?
everything i read says you can't use anonymous AND windows auth.. so my thought was to just redirect the anonymous users to another site.. how can you do that?
View 1 Replies
Jan 17, 2010
Is there an easy way to cache ASP.NET whole page for anonymous users only (forms authentication used)?
Context: I'm making a website where pages displayed to anonymous users are mostly completely static, but the same pages displayed for logged-in users are not.
Of course I can do this by hand through code behind, but I thought there might be a better/easier/faster way.
View 1 Replies
Jul 23, 2010
I have denied anonymous access to the entire application using the following Web.Config setting:
<authorization>
<deny users="?" />
</authorization>
Then, for various paths, I have allowed anonymous access using Web.Config settings such as this:
<location path="Home/ShowLogin">
<system.web>
<authorization>
<allow users="*"/>
</authorization>
</system.web>
I'd like to be able to determine during the processing of a given request whether the requested URL is to path that allows anonymous users or whether the request is to a path that denies anonymous users.
What is the most elegant way of determining this?
View 1 Replies
Feb 14, 2011
I am using windows authentication in my web application. All we need is when the application will be executed it will launch login.aspx page. If users put correct userid and password(checked from active server directory) it will be redirected to a difference page. But if any unauthenticated user tries to access any other page in the application by typing the Url on the address bar it will be again redirected to the login page. We have to do this by changing our web.config file.I can achieve this using form authentication but not windows. But our requirement is windows. The requirement is very basic but all effort is just not working.
View 2 Replies
Mar 9, 2011
I would like to ask if somebody knows how to deny view of page in the telerik rad menu to anonymous users. So if the user wont be leged in then he wont be alble to see a page in the rad menu, but when he log in the the page show up in the menu.
View 2 Replies
Mar 26, 2010
in my aspx.vb page i have written
Label1.Text = Me.Page.User.Identity.Name
when i do view in browser (without publishing to any server) i see label's text as
abcxyz which is correct
but when i publish it, i dont see any text . I have made setting IIS to allow anonymous users so that anyone can open the wesite and see their computer login id
like abcxyz
View 1 Replies
Mar 2, 2011
I have a E-Shop Site and I need some customization for my users like following :
Store favorite products in their own basket.Customize products list in order to what are their favorite. It must remember their basket next time they want to visit our site.
my question is how I can store information for my customers who are new to my web site also most of customers don't like to have username and password then login first they like to buy during a week and at the end of week pay for them then we can send some products to their locations.
I have already written my application using asp.net with framework 4.0.
View 3 Replies
Feb 15, 2010
I m writing a web page to display user name and his contact number.
I m giving user a choice to enter user name once he enter the name i should be able to search in active directory and return all user starting with (inputed name).
DirectorySearcher deSearch = new DirectorySearcher(de);
//set the search filter
deSearch.SearchRoot = de;[CODE]....
Above code needs exact login name like adamjo which is not the purpose.i should be able to display all possible possibilities for example if user enters adam i should give him choice to select whether he want to see adam josef or adam john e.t.c.Is there any property to find first name from active directory?
View 3 Replies
Aug 4, 2010
I have a user control which, when pressing a command button, sets a property for the Profile (which has been marked as allowanonymous=true), then save it using Profile.Save().
Now, in IE this works fine - no problems at all. I then go to the page where the value is used - and it's there and can be used.
However, exactly the same routine when running in Safari or Firefox doesn't work - although when you're on the same page where the value is set it will immediately state that the value is ok, do a postback and it's gone!
Here's some very simple code to show the problem. Whilst IE will always dump 'plop true/false' to the screen (yes, I know - very juvenile!), FF and Safari will the first time, but on postback will just dump True to indicate it's a postback. (oh, and autosaveprofile is set to true in this example - otherwise there'd be a Profile.Save() below the set property).
[Code]....
I can't use Cookieless session states as the CMS I'm using won't allow it. I've also used Fiddler to try and track the issue, but no joy.
I'm guessing it's related to the way FF and SF handle cookies - but both are set to accept anything. Could it possibly be anything to do with the ASP.Net Development Server? (ie. the address is[URL]The fact that it never manages to save the value
View 1 Replies
Feb 11, 2011
I want to learn how to add/delete/update account (including adding mail boxes for new users). Can someone point to a good book where I can begin from. I want to start with some real basics and build from there.
View 1 Replies
Mar 13, 2010
have a probleme with my search filter, i want to list the users of an organizational unit result.filter =(& (objectClass= user)(ou=dep1)); ====> it didn't work for me
View 1 Replies
Jul 7, 2010
I want to use the Domain Users group to show all the users in a dropdown box. For some or other reason I cannot return all the users when looking for everyone under the domain so instead I was thinking of using the domain users group.This is part of my code:
[Code]....
[Code]....
View 1 Replies
Jun 15, 2010
I need to list a group of users, their group name is (IRS Group) to a list group. how to do this. I'm very new to asp.net and dont have much knowlegde about acctive directory.
View 1 Replies
Jan 18, 2010
I am currently implementing a client-side paging solution using ASP.NET, jQuery and JSON.
I have been following the excellent article from encosia: http://encosia.com/2008/08/20/easily-build-powerful-client-side-ajax-paging-using-jquery/
In my Web Method I retrieve my data from the database as a DataTable:
DataTable categoryProducts = ProductViewerAccess.GetCategoryProducts
("AA", 4, 0, Page.ToString(), out howManyPages, "FALSE", 0, "CostPrice", "asc", destinationList);
I then retrieve the data from the DataTable into an anonymous type:
var feeds =
from feed in categoryProducts.AsEnumerable()[code]....
This all works great.
However, I would like to extend the code to perform some evaluation checks (e.g., check that various columns in the DataTable are not NULL) and other pre-processing (e.g., call various functions to build the image URL based on the image ID - which is another column in the DataTable not shown in the code fragment) before I return the resulting rows of the DataTable as an anonymous type to the client-side.Basically, I want to iterate through the DataTable, perform the evaluation checks and pre-processing, while building my anonymous type manually as I go. Or maybe there is a better way to achieve this?
View 2 Replies
Apr 22, 2010
I'm a complete beginner with Active Directory, never having done anything with it. So here's probably a basic question.
Can I run a simple query from within an application to get all enabled active directory users?
View 3 Replies
Jan 12, 2010
I have a web page where I am denying anonymous users from accessing. In the web site I have a folder called FileManager. In the web app the usres have the ability to uploaded files and when they do a folder gets created under the filmanger and the files are saved. I have created a web.config in this folder that denies anonymous users. The problem is if the user knows the directory structure they can type in the url of the site add /FilManager/x/x/NameOfFile, where x are the sub directories. If the file is an image it shows the image in ie, if it is a .xls or .doc or what ever they get the prompt to either download or save the file. What am I doing wrong. Will the web.config file not stop an anonymous user from access files? I put a webpage in the folder and it is blocked and the user gets sent to the login screen, but files seem to be unsecured.
How do I block anonymous users from being able to access the files in this folder?
View 4 Replies
Jul 7, 2010
I am trying to retrieve all the users from active directory into a sorted list, but for some reason it does not return all the users like myself for instance. It's on a client's ad and there is probably about 1500+ users in AD.
My code is as follows
[Code]....
What am I doing wrong?
This is the first time I am working with AD...
View 1 Replies
Mar 2, 2011
How can I get a list of users from active directory? Is there a way to pull username, firstname, lastname? I saw a similar post where this was used:
PrincipalContext ctx = new PrincipalContext(ContextType.Domain, "YOURDOMAIN"); I have never done anything with active directory so I am completely lost.
View 3 Replies
Jul 12, 2010
I have a web site with an administrative section. All administrative pages are stored in a directory called "db/administration". There is only one user that I want to have access to the pages in this directory. That user's username is "system". Currently, I am using the following approach in my web.config file:
[Code]....
When I logged in as another user, I was still able to access pages under db/administration when I navigated to them through the browser's address bar. What am I doing wrong?
View 2 Replies
