Configuration :: Calling Dll With Gives HTTP 503 Error On Production Server?
Jan 11, 2011
We have had some problems with using a unmanaged DLL file written in Delphi. (Unable to load dll - not found...)The following code solved the problem on my local machine:
[Code]....
1) The elusive DLL is copied to the ASP.NET temporary files folder2) To check this we get a list of files from that folder.3) The needed function is called with DLL-import.1 & 2 works perfectly - both run directly from Visual Studio 2010 and when uploaded to a webhotel3 works perfectly local, but causes the remote host to think a little and then return a HTTP 503 Service Unaviable error for the next few minutes...
I am currently trying to setup our website on a windows 2008 R2 64bit machine without much success. When I try to run the website I get the error detailed below. This only happens when I run the site under .NET 4. It works when I run it under .NET 2.
I have also tried going to a test aspx page to see what happens and it also give me the same error so it is obviously something to do with .NET 4 or the way I have it set up. I am thinking it might be a permissions thing but I am not sure what permissions should be set where. Please note this is the full version of .NET 4. The error I keep getting is:
HTTP Error 500.0 - Internal Server Error
An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.Detailed Error Information
Most likely causes: The module could not be found.IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.
IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.
IIS was not able to process configuration for the Web site or application. The authenticated user does not have permission to use this DLL.
The code in the test.aspx is <%@ Page language="vb" %> <html> <body> [code]....
the same application is working fine in 32 bit machine of my colleague where as in my 64 bit machine I am getting the following error. I also tried by changing Target Platform of the web app, under Properties-->Build-->Platform Target: From X86 to X64, in fact I tried all 3.
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid. Detailed Error Information:
More Information: This error occurs when there is a problem reading the configuration file for the Web server or Web application. In some cases, the event logs may contain more information about what caused this error.
i got a this exception when i calling my web service in producction server.i already test the web service in server side and this don't have problemasbut when i calling the web service in the development site this throw a
(spanish)"Error de la solicitud con el código de estado HTTP 417: Expectation failed." or (english)"The request failed with status code HTTP 417: Expectation failed."
I am having problem redirecting error when error is http 500 or http 403 locally running this site there is no problem it gets redirected to my errorpage.aspx. But when deployed at server, it does not get .tried putting try and catch in page_load and in global.asax and I have set Application_Error to redirect to that page and also set <customErrors defaultRedirect to that page also
I am using the Ajaxpro dll in my development server working fine.If i am going to deploying the code from production server its not working. I am getting the Ajaxpro is undefined..
I am wondering the best way to change my connection string based upon which server I am accessing.
Essentially, all of the development is done on our local machines - once we think it is working, we upload it to our development server. In these 2 instances, I want my application to go off of our "dev" connection string for the SQL database in the web.config.
However, once it is published to our production server (for an internal application), I would like the connection string to point to our live db.
I am using the N-Tier model by Imar Spaanjaars - and have it setup like he suggests - In my DAL I have a class called AppConfiguration -
In this class I have a public readonly property ConnectionString() which returns the connection string in the web.config.
This is in an individual class library. What I would like to do is something similar to:
If server is localhost OR devstring return devString else return productionstring
I have deployed simple application on production server it just update sql server table via update query.
The problem is That when I run that app on development machine it updates table on remote server but after deploying it on production server and accesing the url on production server/and development machine my code doesn't execute and thus it don't update table.
I have created virtual direcotry and configured app with specific application pool which is custom based Asp.net account.
In Production Server there are Issue with Writing in one of File. File not getting Write.I have give all the permsion even added EveryOne give full permsion.It's working on a windows 7 But Not working on a Windows Server 2008.R there any extra permsion need to apply ??
I am rather new to asp.net but I have built a couple of apps that do not require users to login. am having some problems moving my secure .net application from my laptop to a production server, however, and I am hoping someone can help me. On my laptop my application's user authentication functions as it should, but when I move my application to a webserver I get an assortment of errors. Forgive me if these questions are a little basic. My first question is this. In a production environment do I move the ASPNETDB.MDF file in the App_Data folder to my SQL server? Is it OK to rename it to something more descriptive?
I have used a dll named MARCEngine, which is used to read Marc data. I use a method named MARC2MARC21XML which converts a normal marc file to an XML file.
The problem is it works great on my local IIS, but when I upload it to the production server, it only generates the root node and not the child nodes.
Here is a snippet of my sample page :
[Code]....
Asp.net has the permissions to access the files geneated.
Sometimes I would like to be able to update during day time my ASP .Net application. I noticed that quite often updating DAL's (.xsd files) that are in used will block my application (and users). The only way, I found to recover, is to restart IIS but my users do not like it.
Is there some more clean way to update an online server without disrupting the users ?
Could I identified the DAL which are in used and the users using them, so that I could somehow disconnect only these users (My application uses Windows authentication).
Problem: I need to move a local development database to the production server without any of the test data.
I am running SQL Server Express 2008 and SQL Server Management Studio 2008.
To create my ASP.NET Membership 2.0 system I created the DB initialy and ran aspnet_regsql.exe
I then added my own tables manually to store additional information.
I adjusted the web.config file with an application name.
When I ran a sript the application ID name was created and populated in the aspnet_Applications table. My script created a new member created and added to the admin role. Ok so everything go so far.
Now I want to move the local DB to the server. I know the connection string and can change this in the web.config.
My hosting company doesn't provide restore, so I don't think I can backup and restore
Q 1. What would be the best way to move the database across. Bearing in mind I need to clean the database out of test data.
Would it be just generate an SQL Script for the database and run it as a query on the server? And if this is the best way then do I need to set the permissions for the ASPNET user?
Q 2. What is the best way to clear out the data in the local database.?
i am using Intelligencia.UrlRewriter on my website and it works fine on my development machine, i tryed to deploy on IIS6 and i get this error:
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.Please try the following: Make sure that the Web site address displayed in the address bar of your browser is spelled and formatted correctly. If you reached this page by clicking a link, contact the Web site administrator to alert them that the link is incorrectly formatted. Click the Back button to try another link. HTTP Error 404 - File or directory not found.
Internet Information Services (IIS) Technical Information (for support personnel)
Go to Microsoft Product Support Services and perform a title search for the words HTTP and 404. Open IIS Help, which is accessible in IIS Manager (inetmgr), and search for topics titled Web Site Setup, Common Administrative Tasks, and About Custom Error Messages. this is the url that throws the error. [URL] this is the working url that is being rewriten to the above one. [URL]
I want to import a DLL (built on VC) in asp.net, and I have a major problem in PRODUCTION Box (IIS 7 and Windows 2008 server). First: I want to say that this DLL works fine in my DEV Box with web application written in C#, and my development server (Win XP SP 3, .NET Framework 3.5 and IIS6). But when I upload my code (web application code + DLL) in PRODUCTION Box (IIS 7 and Windows 2008 server). Web application doesn't work with DLL any more. I am sure that Asp.net knows this DLL well, and if it did'nt recognize it would give me an error, but my problem is that my DLL does'nt works proprely when I run it in IIS 7 under Windows 2008 server. Do you know any solution ? Can it be something with the IIS 7 permissions?
I have an ASP.NET web application that has the following settings in the web.config file:
[Code]....
(The actual names are different, obviously.) I am not a member of the real "Valid Site Users" group which is why I am given explicit access.I am able to access the site without a problem while developing and debugging locally; however, I get a 401 (Unauthorized Access) error when I deploy the site to a server. The only way to gain access is to remove the <deny> element from the configuration, which is not an acceptable option.I'm certain the solution is something simple and I am just overlooking
I m getting the following error when i upload my site to Production Server using Database in App_Data ASPNETDB.MDF
Server Error in '/' Application. Runtime Error Description: An application error occurred on the server. The current ustom error settings for this application prevent the details of the application error from being viewed [code]...
I run a asp.net 4.0 website. (I did the porting from version 3.5 to 4.0)I receive the following error :ASP.NET AJAX client-side framework failed to loadn a page where I set scriptmanager EnableCdn="true" and there is a microsoft ajax extension Timer on the page.
[Code]....
I receive the error only on the production server.
I backported MVC musicstore sample in codeplex to .NET 3.5
From VWD2010 IDE it runs OK, uses ASP.NET web server.
I published it to local file system. Web.config file included in musicstore source code is present in root.
Typing http://localhost in browser returns error
HTTP Error 403.14 - Forbidden The Web server is configured to not list the contents of this directory. <fieldset><legend>Detailed Error Information</legend>.....
So I have visual studio solution, it contains several projects, It was done by other. one of them is asp.net web application. others are data access and business logic C# projects.
When I open solution and want to view web pages from asp.net web application I get error
Server Error in '/WebApp' Application. HTTP Error 404 - Not Found. Version Information: ASP.NET Development Server 9.0.0.0
I tried to change startup options including startup page and so on but it doesn't show any page...
In my website users can create thier own websites by making folder of thier choice like: [URL] Where the folders Pankaj and Adam are storing in database. I just want that when user after creting thier website just clicked or type the address of thier website as [URL] then if the folder with name Pankaj exists in database then the page will open otherwise it gives the http 404 page not found error. And while the address [URL] is opens then i donot want to physically create it on server. My requirement is that i want to open it by the concept of url rewriting/ Routing. Which one concept will be good for this. And can anyone provide some code with example that how can i achieve this easily.
