Configuration :: Reg Key MaxWebConfigFileSizeInKB Not Supported On IIS 7.5 Windows Server 2008 R2 64 Bit?
Jul 20, 2010
My web app, Web.Config file is larger than 250 kb. To resolve this problem, before on windows server 2008 iis 7.0 32bit, i have created a key with regedit in HKLMSoftwareMicrosoftInetStpConfigurationMaxWebConfigFileSizeInKB, and this work perfectly.
Now on windows server 2008 R2 64bit, this key is not more supported, it's my idea.....
What is the solution ? I can't split my web.config.....
How to bypass this security restriction by default ?
View 2 Replies
Similar Messages:
Mar 8, 2010
I've installed IIS for Windows Server 2008 SP2 and Windows 7. In both instances, I can't get even the simplest of ASP.net scripts to work (note: I'm ftping the published files from Visual Web Dev 2008 Express on XP):
------------------------------------LOCAL MESSAGE---------------------------------------------
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error
[Code]....
Line 36: ASP.NET to identify an incoming user.Line 37: -->Line 38:
<authentication mode="Windows"/>Line 39: <!--Line 40: The <customErrors> section enables configuration
Source File: C:inetpubwwwroot estweb.config Line: 38
------------------------------------REMOTE MESSAGE-------------------------------------------
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a
<customErrors> tag within a "web.config" configuration file
located in the root directory of the current web application. This
<customErrors> tag should then have its "mode" attribute set to
"Off".
[Code]....
<!-- Web.Config Configuration File --><configuration> <system.web> <customErrors mode="Off"/> </system.web></configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
[Code]....
<!-- Web.Config Configuration File --><configuration> <system.web> <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/> </system.web></configuration>
Can anyone tell me what I'm doing wrong here in the web.config file? This is killing me.
View 5 Replies
Feb 26, 2011
Does anyone know of any requirements to get the Ajax Control Toolkit (Calendar Extension in particular) working in this OS? I have it working on my local macjine (VS 2010 Development Server) but it doesn't work when published to my Virtual Server running Windows Server 2008 R2. No errors are reported, just nothing happens when I give focus to the Calendar textbox (no Calendar appears).Anyone know of any configutrations that need to be made in Windows Server 2008 R2?Is there a 32-bit/64-bit issue with the Toolkit?
View 8 Replies
Jul 9, 2010
I'm deploying a web site to a server I've set up for testing. The website works great in development (Running in VS 2010) as well as in production on multiple client sites. I'm simply trying to test the site in a new environment. I simply copied the complete site (pages, code, directories, everything...) to my server. In IIS7 I created a new web site pointing to the directory containing my site's files and directories. I can open my site and my initial login page loads.
Database connections are made, page and buttons all seem great. Then, I log in. In the first line of code that attempts to instantiate an instance of a class contained in my App_Code folder, an exception is thrown, 'Invalid object name'. I've messed with as many settings as I could in IIS7 but to no avail. I've searched the internet on something regarding this, but nothing seemed to apply. At this point I'm about ready to install Visual Studio on my server to get it to run (this was the route one of the other developers took).
View 3 Replies
Sep 29, 2010
we are a company that owns more than 12 domains and we would like to have our own server in our office that we could put our websites, ms sql database in. we are thinking to get Windows Server 2008 R2 but we do not know how to proceed in order.
are we allowed to have our own server in our office to store our websites, sql servers?is it going to work fast if we have one or is it going to be slower than now ( we have dedicated server now)how do we pay? do we need to pay every year or we pay once and then it is all ours? I await for the replies.
View 5 Replies
Dec 13, 2010
i am using windows server 2008 and IIS , somebody installed Dynamic Business Portal everytime users trying to use the portal they enter the servername or by ip @ of the windows server /Bp but a login authentication asking them to insert a username and password they can t login the system even they enter their windows authentication
I published another new ASP called Mytest users put name of ther server or ip of the server /Mytest they were able to access the page and no pop up asked them or authentication I added IUser and Everyone and enabled full access.. i check the PB configuration in IIS it was the same Everyone and Iuser are added and full access is enabled how to get rid of the authentication popup
View 4 Replies
May 11, 2010
I have a website build with .Net 2.0 Framework, I tried to deploy it in iis 7 ( Windows Server 2008 ). I get the following error when i browse the project. Server Error in '/' Application. Security Exception Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.
Exception Details: System.Security.SecurityException: Your application is not running with full trust. Please call AspxLab.WebControls.Runtime.Initialize to manually initialize AspxLab Controls runtime environment. Source Error:
[Code]....
Stack Trace:
[Code]....
[SecurityException: Your application is not running with full trust. Please call AspxLab.WebControls.Runtime.Initialize to manually initialize AspxLab Controls runtime environment.]
a..ctor() +540
az..cctor() +140
Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
View 3 Replies
Nov 17, 2010
I have web app written in .net 4.0 using url routing. It works fine in the development environment in VS 2010.But It's not working after publishing to iis7. on remote server i'm getting error HTTP Error 404.0 - Not FoundThe resource you are looking for has been removed, had its name changed, or is temporarily unavailable. I tried in virtual directory and it's not working.[URL]
View 1 Replies
Sep 23, 2010
I want to import a DLL (built on VC) in asp.net, and I have a major problem in PRODUCTION Box (IIS 7 and Windows 2008 server). First: I want to say that this DLL works fine in my DEV Box with web application written in C#, and my development server (Win XP SP 3, .NET Framework 3.5 and IIS6). But when I upload my code (web application code + DLL) in PRODUCTION Box (IIS 7 and Windows 2008 server). Web application doesn't work with DLL any more. I am sure that Asp.net knows this DLL well, and if it did'nt recognize it would give me an error, but my problem is that my DLL does'nt works proprely when I run it in IIS 7 under Windows 2008 server. Do you know any solution ? Can it be something with the IIS 7 permissions?
View 2 Replies
Sep 10, 2010
I have developed a website using visual studio. Now i want to deploy the same on server having windows server 2008 o.s. and IIS 7. When i copy the website and paste it into wwwroot folder of iis its not working. What settings need to be done so that website can be accessed from iis.
View 2 Replies
Mar 18, 2011
I have a framework 2.0 AJAX app that was moved to Windows 7 2008 R2 server with II7. The application pool is set to 2.0 for the website, but its always looking for this assembly. Everything I've read says you do not install AJAX 1.0 Extensions on Server 2008? Since this IIS is not mine, I'm trying to be cautious. Should I install the extensions, or is there some server setting Im missing??
Parser Error Message: Could not load file or assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 29: <compilation debug="true">
Line 30: <assemblies>
Line 31: <add assembly="System.Web.Extensions, Version=1.0.61025.0, Culture=neutral,[code]...
View 5 Replies
Mar 30, 2010
When I try to encrypt the "connectionStrings" section in the web.config file of my asp.net web application on Windows Server 2008, I'm getting the following error:
Administration utility (2.0.50727) to install and uninstall ASP.NET on the local machine. Copyright (c) Microsoft Corporation. All rights reserved. Note: This utility has limited capabilities on the Windows Vista operating system. It is recommended that you use the "Turn on or off Windows features" option of the "Programs" component of Control Panel to install or remove ASP.NET. It is also recommended that you use the IIS Manager component or the Appcmd.exe tool to configure ASP.NET applications.
The above information is followed by the list of valid options to aspnet_regiis.exe.
The command that I've used is:
aspnet_regiis.exe -pef "connectionStrings" "C:Usersuser1DocumentsMywebsite" -prov "DataProtectionConfigurationProvider"
But, the same command is working fine when used on a Windows Server 2003 machine. The problem is occurring only on Windows Server 2008 with IIS7.
View 1 Replies
Jul 7, 2010
I am running a web-site with simple .aspx files on a standalone workgroup Windows Server 2008 called 'Max'.I had assumed that the .aspx files were accessed by the 'Network Service' account.The application pool for the website is running with 'Network Service' as the process account.I was puzzled, since 'Network Service' had no permission on these files. So I added event level auditing to the files, and I was suprised to learn that the .aspx files were being accessed by an account called Max$ (ie the computer account).this correct ?Why is the Network Service account not being used ??
View 3 Replies
Oct 19, 2013
We are running asp.net website on windows server 2003 with framework 2.0 and asp.net ajax 1.0 extensions. now we planned to migrate websites to windows server 2008 r2. since my websites on framwork 2.0, I need to install same framework on windows server 2008 r2 but I didnt find 2.0 version for windows server 2008 r2. Is it possible to install 2.0 version on windows server 2008 r2 ??
View 1 Replies
May 17, 2010
Is SQL Server Express supported in Windows 7 Starter edition?
View 3 Replies
Dec 1, 2010
I need to know if .net 4.0 is installed on server or not. How can I do that?
View 6 Replies
Mar 28, 2010
I have been working on developing a website using -
Visual Studio 2008 Professional (.NET 3.5) and SQL Server 2000.Now I have it work perfectly on my local machine. Now when i upload my website on my Windows 2003 Server, I get an error saying
"Type 'System.Web.UI.WebControls.Parameter' does not have a public property named 'DbType'".
It alse gives me error when there exist a Date in the Page Designer but that's fine when I use DateTime. I think this might be an issue since DateTime no longer is supported in SQL Server 2005.
Now to resolve this issue on my server thus far I simply rename them to Type and DateTime and all is well. But On Changing and editing locally and then uploading again, I need to redo that.
View 1 Replies
Mar 10, 2010
Currently we are running an application build in VB6,ASP,Commerce Server2000 and Sql Server 2000. This application is running in Windows 2000 server.Now we are planning to migrate Windows server 2000 to Windows 2008.Will this application run in Windows 2008 or do we need to upgrade this application to dotnet and Sql 2008?
View 1 Replies
Oct 11, 2010
Microsoft Visual Studio 2010 was being used along with SQL Express for website development on the Operating System, Windows Server 2008 R2 Enterprise Edition of Intel Xeon CPU @ 2.13 GHz (2 Processors) containing 12 GB RAM with 64-bit Operating System. Website was developed along with the databases of SQL Express with the help of Visual Studio. Whether the developed website along with the databases may be used on the Operating System, Windows 7 of 64-bit? The website will used within Intranet. Which Operating System and configuration to be used for the Intranet Website?
View 1 Replies
Mar 17, 2011
I just downloaded and installled the Microsoft Windows Azure SDK yesterday for the first time and I am having issues running the application as I all I am getting is 503 errors. I run Windows Server 2008 R2 on my development machine and even tested it on another co-workers 2008 R2 and couldn't even compile the application. He got this error instead "A problem occurred while trying to set the "References" parameter for the IDE's in-process compiler. Error HRESULT E_FAIL has been returned from a call to a COM component."
From within my Windows Server 2008 R2 Hyper-V Virtual Windows 7 x86 enviroment, I was able to successfully build and run the Windows Azure SDK and it even showed the base ASP.NET application.So my question is, does the Windows Azure SDK for Visual Studio 2010 w/ Visual Studio 2010 SP 1 installed not work under Microsoft Server 2008 R2?
View 1 Replies
Mar 28, 2010
I have looked at all the posts I can find on this problem and tried everything I can think of, but still the problem persists. I am getting really sick of it.was working fine for the last year until an update to MS Office 2007 caused a lot of problems (automatic update). After checking posts here, I removed it completely. No change. I then tried all the things I could find on other posts, also no change. Today, I removed VS and the Web Authoring Component and re-installed. Still no go.
Does anyone have a fix for this problem. It seems that it has been around a long time, but is still giving problems. I even saw one suggestion to reformat the drive! You've got to be joking!
View 4 Replies
Oct 11, 2010
I am looking at developing using Visual Studio 2010/2008 and SQL Server 2008 on Windows 7. Should I be able to do this on Windows 7 Professional, or do you need Windows 7 Ultimate?
View 2 Replies
Mar 28, 2011
JQuery to asmx fails on Windows 2008 R2 SP1
View 1 Replies
Jun 7, 2010
I'm creating a website and I'm testing resgistering and Log-in.
I followed a simple tutorial to create a Log-in in Visual Studio C# template which generated a SQL Server database.Locally the Log-in and registration page works perfectly. The problem is that when I upload my site to the hosting site the navigation works but the Log-in and Registration forms send an error when clicked "Register" or "Log-in". I contacted the site and they upload my database the way it should be because I was doing it wrong. I can see all my files including the data base.
They commented me that I had to do a connection string to the data base so the login and registration forms can work. I don't understand how to do that, I know the connection string has to be declared in the Web Config File, the thing is that I don't know how to write that code and link it to my data base in the hosting site, in fact I have sample code but I don't know just what do I need to put in it.
View 8 Replies
Jan 11, 2011
I am working on the migration of the server. Our new server is Windows server 2008 with IIS7.0 I have a great difficulty in browsing the pages hosted in virtual directories. I have followed the proper steps of creating a virtual directories and converting them into applications. But when i try to browsing the pages of the virtual directory, i get the 404 error. Note: The .Net Framework 4.0 is installed on the server and the web applications which i am trying to configure in the virtual directories are developed in Visual Studio 3.0. Even the http://localhost also don't work.
View 9 Replies
