Using Crystal Report to view reports on the site and noe able to pass parameters succesfully.
Heres the code:
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Report.aspx.cs" Inherits="MATReports.Report" %>
<%@ Register Assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
[Code].....
my requirement is i want to pass richtext content and text as t is in rich txt box such as bold,color font .... into crystal report
View 1 RepliesI am using the following code to pass parameter from VB to crystal report but getting the error messgae "Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX))" while it trying to add the first parameter. This chunk of coding works in another VB perfectly. The only diffferent is the working one takes the parameter to stored procedure where the failed one I added parameter during crystal report design time.
[Code]....
I defined a report with a parameter (ID_Aluno) in Crystal Reports to show it in an .aspx page. The page is called by another page passing it a query string with the value I need as a parameter in the report. In the code behind file I tryed three different approches without success. What happen is that the report is showed without data, but when I open the parameter panel I see that the parameter is there (If I don't set the parameter value actually it complains that the parameter is missing, giving an arror).
Here is the code I used to set the parameter:
[Code]....
The First try (code not commented) is the one I would like to use because it is the shorter and simpler one.
Here is the mark up for the report source and report viewer:
[Code]....
Have I to declare or define something special in Crystal Reports for the parameter to be received and applied?
parameter field {?country}: string
allow diffrent values: true
selection record: table.country in {?country}
when i pass one parametrs it's works fine.
rd.SetParameterValue("country", DropDownListSalle.SelectedItem.Text);
my question is how can i passing multiples values (tokyo,usa,india,...) ?
I have a crystal report which accepts a parameter and gets displayed on a webpage abc.aspx
On another webpage i have a grid displaying columns from a table loan_request.
When I click a row in gridview I want to get the report of that corresponding row.
I used rowcommand on gridview to get the value that uniquely identifies the row in a gridview, now I need to pass this value as parameter to the crystal report.
for this i think two possibilities
1. pass the value as querystring.
2. store it session and use it on the page that display the report.
I don't want to use query string.
for better understanding. once look at the code.
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Request_Log_Search_Sort.aspx.cs" Inherits="WebApplication1.Request_Log_Search_Sort" %>
<%--<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="asp" %>--%>
<%@ Register Assembly="CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
[Code].....
I used lable(Lblname) in page that bind it from database:
private void ViewDocInfo(int data1) {
using (SqlConnection conn = General.GetConnection()) {
using (SqlCommand _cmd = General.GetCommand("Documentry_ViewMostanadInfo", conn)) {
_cmd.Parameters.AddWithValue("@id", data1);
conn.Open();
[Code] ....
I have datalist that bind it from database:
private void GetCustomersPageWiseView(int pageIndex) {
using (SqlConnection conn = General.GetConnection()) {
using (SqlCommand cmd = General.GetCommand("GetCustomersPageWiseMC", conn)) {
cmd.CommandType = CommandType.StoredProcedure;
[Code] ...
And I have Linkbutton :
protected void LBview_Click(object sender, EventArgs e) {
Lblname.Visible = !(DLMostanad.Visible = true);
this.GetCustomersPageWiseView(1);
}
In above code as you see when click on linkbutton it will Lblname.visible=false
But in this metod:
this.GetCustomersPageWiseView(1);
In this line:
cmd.Parameters.AddWithValue("@Name", Lblname.Text);
I need Lblname.text but when I click on linkbutton it will lblname.visible=false and it can't pass lblname.text to GetCustomersPageWiseView metod...
How I can pass lblname.text to this metod?
protected void btn_showReport_Click(object sender, EventArgs e) {
try {
ReportParameter Comp_Name = new ReportParameter();
Comp_Name.Name = "Comp_Name";
ReportViewer1.ProcessingMode = ProcessingMode.Remote;
ReportViewer1.ServerReport.ReportServerUrl = new Uri("http://dell-pc/ReportServer");
ReportViewer1.ServerReport.ReportPath = "/Companies Report/Companies";
[CODE]..
the above code is in "reportpage.aspx" when I click on it the company report is shown according to the parameter "Comp_Name"
I want to show report in "reportpage.aspx" according to parameter name passed from another .aspx page, how to do that?
I need to pass some data from text box ( ie dump from textbox ) to crystal report how can ido it using formula field in c# i have textbox1.text="INDIA" how do i display the value from textbox in crystal rpeort using formula field.
View 1 RepliesI want to pass a string to textbox at report header section. how to do this? Devlopment plateform is C# ASP .net. (VS2005)...
View 3 RepliesI has developed a crystal report, which display the records from a table and filters them based on a parameter( date range parameter). now I has integrated the report into a asp.net page using c#, but when I am running the asp page it is not promption for the date range values, it used to prompt for date range when I run the report in crystal report.
View 2 RepliesI am creating the crystal report without database data, just i am read the data from text file and fill into dataset then genrate the crystal report but problem is here if i am export the crystal report into different format so he wants the database logon parameter.so in this case i have no database crendential because i am creating the report without database.
View 1 RepliesI am developing we application using Csharp on Visual studio 2008.How can I pass values from Page or GridView to a Crystal Report? For example I want some details on a Default.aspx want to appear on the Crystal report when I click on it. How do I pass theses values from Page to crystal report at Runtime?
View 3 RepliesI create an ASP.NET Crystal Report Web application using VS.NET 2010. In ASP.NET page, I stored two values in Session state and need to pass them as input parameters to Oracle stored procedure. In Crystal reports 2010 once you connect to a stored-procedure as data source, it automatically creates the parameter fields with Crytal Report Viewer. how I pass values to store procedure at runtime automatically.
Detail code:
1. ASP.NET page store the values in the Session:
Sesion.Item("CourseNumber")
Sesion.Item("StudentNumber")
2. I like to pass above values to the store procedure with IN parameters named P_CourseNo and P_StudentNo to print out the Crytal Report with Store Procedure as data source.
i can develop crystal report with password itself.But, i want to pass values in to crystal report programatically..
View 1 Repliesi need to pass parameters into the crystal report...i am using asp.net with c#
View 1 RepliesWhen i run the application locally it works fine but when i publish it n access from it it gives the error asEither the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
View 2 RepliesI have basic understanding to cache webpages for duration. Now I have some complex requirements:
1. User e.g "Nauna" login in asp application
2. Visit on report page
3. Pass data range from 01-01-2013 to 30-12-2013 and extract the report which retreive data in 55 seconds on gridview
4. Now I want that when next time user "Nauna" login in the application and use the same report with same parameter 01-01-2013 to 30-12-2013 so that report should be come up from cache instead of run the complete life cycle.
I am trying to populate a report with parameters from session. Problem I am getting is that it is asking for parameter after I click the 2nd page of report. If I remove the Session.Remove it works good. Is there anyway to clear session after the first time the code executes? Here is my report viewer page code
public partial class setups_ftreaty_ft_mstmt : System.Web.UI.Page
{
ReportDocument rptDoc = null;
protected void Page_Init(object sender, EventArgs e)
{
string reportName = Request.QueryString["reportName"].ToString();
rptDoc = new ReportDocument();
rptDoc = ReportFactory.GetReport(rptDoc.GetType());
string path = Server.MapPath("~/reports/ptreaty/" + reportName + ".rpt");
rptDoc.Load(path);
if (Session["ptRepParams"] != null)
{
Hashtable repParams = (Hashtable)Session["ptRepParams"];
foreach (string param in repParams.Keys)
{
rptDoc.SetParameterValue(param, repParams[param].ToString());
}
}..............
I am using a sub report inside the main report but the issue is thatboth main and sub report take same argument i.e emp-idwhat i want is that either subreport copy parameter of main reportor in some way should be able to send paramet throug code-
"Session["username"]="muneeb";
ReportDocument report = new ReportDocument();
report.Load(Server.MapPath("~/UOGERP/GUI/Reports/CrystalReport.rpt"));
[code]...
I am trying to pass date as parameter from my asp application to crystal reports.
If I pass 1 jan 2010 to 16 Jun 2010 it will not get me some of the records which are on dates like 11 april 2010. And If i select dates between 1 Jan 2010 and 30 Nov 2010 then system will get me the records. Here I understood that system is not understanding the date format the problem is in date format of "dd/mm/yyyy" and "mm/dd/yyyy".
I have 2 asp.net pages first page (PaySlipForm.aspx) contains ui elements for getting values from user, second page shows the report depending on the parameters passed from first page. The problem is first time the report shows correctly but when I go back on first page by clicking the back button of browser and changes the selection the report is shown empty only labels are shown.
First Page PaySlipForm.aspx
<asp:DropDownList ID="ddlAllEmployees" runat="server" style="margin-left: 7px"
Height="20px" Width="174px"> </asp:DropDownList>
<br />
<asp:DropDownList ID="ddlMonth" runat="server" Height="23px">
</asp:DropDownList>
<br />
<asp:DropDownList ID="ddlYear" runat="server" style="margin-left: 18px"
Height="23px" Width="77px">
<asp:ListItem>2010</asp:ListItem>
<asp:ListItem>2011</asp:ListItem>
<asp:ListItem>2012</asp:ListItem>
</asp:DropDownList>
<br />
<asp:Button ID="btnShow" runat="server" Text="Show" PostBackUrl="~/Reports/PaySlipViewForm.aspx"/>
Second page is PaySlipViewForm.aspx that has the code
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
AutoDataBind="True" EnableDatabaseLogonPrompt="False" Height="50px"
ReportSourceID="CrystalReportSource1" Width="350px" />
<CR:CrystalReportSource ID="CrystalReportSource1" runat="server">
<Report FileName="../Reports/PaySlip.rpt">
</Report>
</CR:CrystalReportSource>
---------------------
if (!IsPostBack)
{
int employeeID = Convert.ToInt32((((DropDownList)Page.PreviousPage.FindControl("ddlAllEmployees")).SelectedValue));
int monthID = Convert.ToInt32((((DropDownList)Page.PreviousPage.FindControl("ddlMonth")).SelectedValue));
int year = Convert.ToInt32((((DropDownList)Page.PreviousPage.FindControl("ddlYear")).SelectedValue));
CrystalReportViewer1.SelectionFormula = "{Payroll.EmployeeID} = " + employeeID + " And {Payroll.Month} = " + monthID + " And {Payroll.Year} = " + year;
}
My code is like this:
string strstartdate = Session["startdate"].ToString();
string strenddate = Session["enddate"].ToString();
ReportDocument reportDocument = new ReportDocument();
[code]...
protected void btn_showReport_Click(object sender, EventArgs e)
{
//ReportViewer1.Visible is set to false in design mode
ReportViewer1.Visible = true;
[Code].....
Parameter 'Comp_Name' does not exist on this report
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ArgumentException: Parameter 'Comp_Name' does not exist on this reportSource Error:
Line 96: ReportViewer1.ServerReport.ReportServerUrl = new Uri("http://dell-pc/ReportServer");Line 97: ReportViewer1.ServerReport.ReportPath = "/test Report/test1";Line 98: ReportViewer1.ServerReport.SetParameters(new ReportParameter[] { Comp_Name });Line 99: ReportViewer1.ServerReport.Refresh();Line 100: }
I'm trying to create dynamic columns in the Crystal Report. The parameter fields are named column1,column2,column3.....
I tried below code and it gives me an error "The parameter is incorrect".
[Code]....