Crystal Reports :: See Subreport In Prview But Nothing Printed?
Jun 25, 2010
I created an AR statement using crystal report. The main report gets customer info and use customer ID and from and to dates to link to three sub reports. The three subreports are (1) opening balance, (2) list of transactions and (3) aging summary. When I previewed it from VS2005 design mode, everything shown pecfectly however when I run it from VB, only the list of transactions shown and the other two subrreports only showed labels but no data. In addition, I can send the report to printer and no PDF can be generated.
View 5 Replies
Similar Messages:
Oct 1, 2010
iam really new to Crystal Report XI Release 2..iam using multiple subreport in mainreport and onclick of particular subreport it would list out all items related to it..for example if u have customer chart(subreport) in mainreport and onclick of this it would list all customer on demand and subreport is binded and onclick of single customer it would list out single customer which sholud be passed as parameter it would get customer(full Contact details) in another subreport.if this can be done. how it can be done and explain in steps how it can be and if possible with screen shots
View 3 Replies
Apr 15, 2010
i want reuse a subreport for other use but i need set visible=false to some controls inside
View 7 Replies
Jun 24, 2010
I am using a sub report inside the main report but the issue is thatboth main and sub report take same argument i.e emp-idwhat i want is that either subreport copy parameter of main reportor in some way should be able to send paramet throug code-
"Session["username"]="muneeb";
ReportDocument report = new ReportDocument();
report.Load(Server.MapPath("~/UOGERP/GUI/Reports/CrystalReport.rpt"));
[code]...
View 1 Replies
Aug 5, 2010
When i run the application locally it works fine but when i publish it n access from it it gives the error asEither the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
View 2 Replies
Jun 13, 2010
I'm new to Visual Studio.NET . I need to integrate the crystal reports into an ASP.NET application. I generated Crystal report with the help of crystal report XI developer edition(Stand alone version and NOT from the one which comes from visual studio).
How to integrate this report with the web application.
View 1 Replies
Jul 16, 2010
We have quite a few reports which were developed earlier in Crystal Reports 8.5. We are now planning to use these reports in our web application developed in VS 2008 (C#).
What dlls are needed for calling 8.5 in the application and how should they be added to the application while shipping it to the client?
They are also struggling to get the code running. Would also need the code to call the report with parameters.
View 9 Replies
Apr 6, 2010
I have already generated crystal reports but i've made them static. but now i want to make the user to select the criteria for generating the reports. for eg., in one of them i want to show monthwise data so user should be able to select the month and year and that would be passed as parameter and compared to the existing data. provide me with proper exact code that can be used for giving parameters in such a report using C#.
View 3 Replies
Jan 4, 2011
In my system Visual studio 2008 with sp1 and Crystal Reports XI Release 2.In Visaul studio 2008 ,while adding add reference it showing crystal reports version 10 instead of 11.How to solve the version problem.
View 1 Replies
Feb 15, 2010
I am considering using Crystal Report 2008 as my tool of creating reports on my webpage.The only problem which I'm facing is that I have no control of the remote server which hosts my site (besides uploading files). I can't run a MSI to deploy the CR runfiles.I can't find anywhere in the CR user manual of how to deploy the runtime files without running the msi, and I'm not even sure it's possible.Have anyone deployed CR 2008 without running the MSI and without having to register any files?
View 8 Replies
Sep 1, 2010
I have a field in my dataset with type nvarchar(1000). when I link it to crystal reports, it converts it to a field of type string with length set to 100. As a result of that, the string in that field is being truncated on the report. How can I increase the string length to 1000? (I already checked the "Can grow" option).
View 3 Replies
Feb 9, 2010
I have developed few crystal reports using VS.2005 and now i want to deploy the same on my web server which is running Windows 2003 server and got installed only .net frame work 2.0.... so now i want to know how can i run those reports successfully and i have downloaded CRRedist2005_X86.msi and even crXIsp3 and 4 _net_server from business objects page and i do have Crystal Reports XI original CD.... while by using them can i run crystal reports on my web pages.
View 1 Replies
Jun 15, 2010
I want report generted based on value from querystring.
View 3 Replies
Feb 4, 2011
Crystal
Reports Error when publishing a Website on to the Web Server---- The type initializer for 'CrystalDecisions.Shared.CrystalReportClientScriptManager' threw an exception
View 3 Replies
May 27, 2010
I'm working on a site that ws developed using VS 2005 and the server where the site is running has Crystal Reports for .net 2.0 (ver 10.2.36)I will be making changes. I just ported the website to my local computer, and build the site using VS 2008, that comes with Crystal R. Basic.I haven't tested all the functionality of the site, so I'm not sure since all the pages that use C. Reports work ok.My main concern is about publishing the site I compiled to the server. Will things work, if I have Crystal R. Basic and the server has Crystal R. for .net 2.0.
View 2 Replies
Jul 25, 2010
I'm getting the "Load Report Failed" Error.
I have a web application designed using VS2008 & Crystal Reports for VS2008 (Ver. 10.5.3700). I'm using Framework 2.0 for deployment.
My development system is WinXp and my deployment system is Win2003 Server.
Here is what i have done -
1) Added a Crystal Report to my project "rptReport.rpt"
2) Added a Crystal Report Source (crSource) to my .aspx page.
3) Added Crystal Report Viewer to my page, with crSource as its Report Source.
This works fine when i run it on my development machine. But Gives a "Load Report Failed" error on my deployment machine.
This is what i have already tried doing on deployment server:
1) Giving IIS_WPG full control to temp folder.
2) Publishing with "Allow this precompiled site to be updatable." checked/unchecked.
View 1 Replies
Dec 17, 2010
Crystal reports are properly working on my local pc but not on server. I am using vs 2008 and install crystal report for Visual basic 2008 on server.but parameter count for CrystalReport is zero on server.
CrystalReportViewer.ReportSource = Session("Rpt" & Request.QueryString("ReportGroup") & Request.QueryString("ReportCode"))[code]....
View 6 Replies
Mar 28, 2011
I have a requirement to generate Dynamic Crystal Reports.I am a new bea of Microsoft .net.
View 2 Replies
Mar 11, 2010
We have an old server (Win Server 2003/ IIS) that makes use of an old version of Crystal Reports for asp.net pages. I'm making a new server (Win Sever 2008 SP2/ IIS 7) that will be the replacement for the old server. I have asp.net apps working, but since I can't use the old Crystal reports install, the new one isn't doing anything for me.After installing CRRedist2008_x86, it shows some files in:
C:inetpubwwwrootaspnet_clientsystem_web2_0_50727CrystalReportWebFormViewer4
andC:Program FilesBusiness ObjectsCommon2.8inAre there any special configurations I have to do in IIS to get asp.net to recognize this stuff? Right now, I'm getting nothing.
View 1 Replies
Jan 4, 2011
why does my crystal reports not loading on the server
View 4 Replies
Feb 19, 2011
I'm new to Crystal Reports and am just trying to add some simple reports to my web application. In the non-report pages I've been using SqlDataSources to retrieve data from the database and would like to do the same for the report pages. I saw a tutorial that indicated I could do this by explicitly setting the data source for the report in the Page_Load callback of the ASPX page as shown below:
[code]...
Is there a way to create "bound" fields w/o a database, since I'll be specify the database at runtime? Or is there a way to create the ".rpt" file w/ unbound fields, that get "bound" at runtime?Or is there a better way to do this altogether?
View 5 Replies
Mar 17, 2011
I have requirement that have to add header and footer into 50 over reports. So I dont want to change one by one.
Is there a way to create master page header and footer and used it in multiple reports?
View 1 Replies
Dec 3, 2010
I have two reports but i want to use the same crystal report viewer to display both reports depending on an option selected. How can I achieve this?
CrystalReportViewer.setCrystalReportSource(CrystalReportSource3) or something like this i am just not sure about the code in c#
View 1 Replies
Apr 13, 2013
I have master page, menu on master page, i use asp roles and trim menu item based on user roles and rights this process is working fine.
Now i have to create some reports based on user roles, and responsibility in a company like country head will view country wide reports, manager region will only view regional report and rest will view reports related to them.
How can i achieve this efficiently using asp roles.
View 1 Replies
May 29, 2010
Runtime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine. Details: To enable the details of this specific error message to be viewable on remote machines, please create a tag within a "web.config" configuration file located in the root directory of the current web application. This tag should then have its "mode" attribute set to "Off". Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's configuration tag to point to a custom error page URL. ----------------------------------- This error will be display when I am try to show the Crystal Report. Can anybody tell me what Property I have to ser in Windows Server 2008 R2 or in IIS7???
View 1 Replies