Custom Server Controls :: Creating A Custom Control?
Mar 3, 2010How to create a custom control and REGISTER IT AND WHERE TO INSERT A CODE IN IT FOR AN EXISTING WEB SITE?
View 4 Replies
Similar Messages:
Custom Server Controls :: Hide A Method While Creating Custom Control By Inheriting WebControl?
Nov 29, 2010I am creating a custom control by inheriting a server control, say LinkButton. There are properties like "BorderColor" available in LinkButton. Let's say, I don't want this particular property to be available when I create an instance of the custom control.
I want to completely hide this particular property (I don't want to override it but disable it.)
My code is as follows:
[Code]....
Custom Server Controls :: Custom Tag Not Found For Control / Error: Unknown Server Tag 'custom:AjaxValidator'
Jan 3, 2011Hope this is the correct forum for this question. I am using VWD 2010 an have a web project and get the following error upon execution:
Parser Error Message: Unknown server tag 'custom:AjaxValidator'.
My code is as follows in the .cs file:
[Code]....
[Code]....
Custom Server Controls :: Creating A Map Control For The Toolbox
Feb 21, 2010I want to create a map control which will be a server side control.I want to have it as a tool in the toolbox. The above control will contain providers that will fetch maps from the following sources:
1) WMS
2) Oracle Spatial DB
3) Google
4) MS Virtual earth.
How to create the providers for the different map sources? Then I hav to create different screens which will take the parameters and send them to the map preoviders. The map providers will send the generated map to a map control (could be a active X control) or something else. The map control should also be capable of performing standard functions like pan,zoom etc. Pls give some idea as well as source code on how to start with it.
Custom Server Controls :: Custom Composite Control With Custom Templated Child Controls?
Mar 22, 2011I am trying to build a custom composite control, which allows me to add custom content to each child control. It's a similar concept to what you have with a GridView and TemplateColumn. The markup used to place the control on the page would end up being something like this:
[Code]....
I have the code below, which allows me to put that markup on the page without throwing any errors, and it renders all the correct HTML, except it doesn't render the contents of the ColumnTemplate. I have replaced the Render() code with a comment because it's quite long winded and doesn't add anything important here:
[Code]....
I have tried to follow examples on MSDN and other forums but I can't make this work. I think I'm missing the code to render the contents of the template, but I don't know how to hook that up.
Custom Server Controls :: Creating User Control Like Gridview?
Dec 31, 2010i'm developing a webusercontrol, that has very properties, properties are of custome types (not primitive), so i want user can edit properties in grid property. i want something like gridview here is a portion of my code:
[Code]....
[Code]....
Custom Server Controls :: Looking For Pointers/advice For Creating This Control?
Jan 18, 2011Within an existing ASP.NET page I've created the following layout, which is a tabbed header and content area. When the tabs are clicked (using JQuery) I show the relevant content, and hide all the other content for that respective tab, like so...
I'd like to expand this functionality to make it into a User Control, so that I could re-use the code more easily. Once the control is created, I'd like to be able to use it like this:[Code]....
where I can start learning how to do this, or offer direct help on the code? I've read many tutorials for creating controls using existing controls (e.g. custom labels etc) but they are all too simple. With the above, do I need to create a ContentArea control first, then work onto the TabbedControl? How do I get ASP.NET to render out the contents of my ContentArea (including ASP.NET controls that are contained within it)?
Custom Server Controls :: Creating A User Control From Scratch?
Aug 11, 2010I want to create a completely new control instead of extending an existing one. I have found a few articles on the net, but it's not exactly what I'm looking for. I've created Custom User controls in Win Forms before and thought it would be somewhat the same in ASP.NET, but it does not seem so. Many articles talk about a Web Control Library template which doesn't seem to be available when creating a New Project, but is available when adding a New item to an existing ASP.NET forms project in VS2008.
I have extended control by using the ASP.NET Server Control template. But all you get with is a .cs file. How do design a brand new control with that?What I want is to create a control from scratch, with postback functionality, and that compiles to a DLL. Am I going about this all wrong? Should I rather be looking at the ASP.NET Server Control Project Template? If so, How do I create a brand new control with the ASP.NET Server Control?I'm working with VS2008 SP1, .net 3.5, and C#.
Custom Server Controls :: Custom Control's Constructor / User To Set That variable In The Properties Window After They Drag The Control Onto A Form?
Mar 4, 2010I have a custom control which inherit from the Table class and in the constructor, it takes a an integer as an argument. There is no empty constructor.
Is there a way for the user to set that variable in the properties window after they drag the control onto a form.
I know some .NET controls, you can set the source for the parameter to different things like another control's property, QueryString using just the properties window.
Right now, I have to create the control dynamically. I read the query string and then created the object.
Custom Server Controls :: Paging And Sorting Gridview Custom Control Inside Of A Wizard Control?
Dec 24, 2010here's a situation and I would appreciate your response.
I have programmatically created the Wizard control:
Page_Load(obj s, evargs e)
{
Wizard ClaimDetailWizard = new Wizard();
foreach(int item in selectedItems)
{
//create new step
//added custom control to new step
//add step to wizard
}
//added wizard to a placeholder on a page
}
Based on List I get from Session i added new steps to my wizard To each step I had added a custom control
Each custom control in tern contains another custom Gridview Control in it.
So here's the problem when the page loads for example for two steps. All is good Wizard does what it's supposed to do.
But when I try to use sorting or paging in that custom Gridview. Somehow it displays the gridview I should see in the next step of the wizard.
Also what I'm noticing through debugging. Is that when I press next in the wizard I go back to the original page where I do all of the code specified above, and it recreates the wizzard. But it goes to the next step. Is this the way wizard supposed to work? Just doesn't seem very efficient.
Custom Server Controls :: Video Tutorial Link For Composite And Rendered Custom Server Control?
Aug 20, 2010i am new to technology so go easy on this post according to what i read from web there are 3 type of custom server controls 1 superclass2 composite 3 renderedi found video tutorial for superclass custom server control but couldnt find video tutials for other 2.lease forward me link for composite and rendered custom server controls video tutorial
View 1 RepliesCustom Server Controls :: Add This Control To The Page,an Alert To Check The Text Value Of The Custom Control?
Dec 20, 2010created a Custom Textbox Control that is intended to be a "masked date" textbox, so that I can handle different ways a user might enter in a date and make it work no matter what.I did this by creating a custom control with 3 separate Textboxes one for month,one for day one for year,then do some handling for different things that could be entered and it would all work.
The problem I am having is,when I add this control to the page,if I do an alert to check the Text value of the custom control it just gives me "[ServerControl1]" even if I enter in a date.
I tried doing an AutoPostback after entering so that it would refesh the Viewstate to have the values of the textboxes but the control doesnt seem to actually postback, even though I have it enabled.accessing the Textbox value after someoen
has entered a date?first custom control I have created and have been using google.
My Server Control Code is as follows:
[Code]...
Create Custom Server Control Also Creating Controls Like Some Third Party Controls?
Jul 6, 2010I have been searching a lot about how to create custom server control also creating controls like some third party controlsbut i cant find any resource regarding that, most of the links explained only basic things with custom label,hypher link like that but i wish to learn bit advanced including fundamental concepts.so can any one show me the link/ebook about concepts behind building a re-usable control (properties and property grid integration in VS/VWD, event handlers, rendering, design-time UI, default tag-prefix and naming, toolbox icon, etc)
View 2 RepliesCustom Server Controls :: Custom Server Control Rendering Method In Multiple Class?
May 17, 2010I am creating custom server control. I have two classes in project. One is main class that render control and another will be used to render content based on condition.I just want to know how to render content from other classes in main class.For example. This isjust an example.My main class code
[Code]....
My TopLeftPane class
[Code]....
My page code on page load event
[Code]....
When I run the page, Header title always getting null. This is a just sample code. I will have more than 20 classes so I dont want to write a code in main class to render whole control.I hope all of you understand my problem.
Custom Server Controls :: TemplateField [TextBox] Binded To DataSource (Custom Server Control)?
Jul 28, 2010Case : a templatefield Text Box created by class TemplateHandler and added to the composite
control Grid .how to bind it to the DataSource Object of the Grid Class ?
Custom Server Controls :: How To Use A Custom Server Control That Is Defined In Inline Code In The Same Page
Oct 22, 2010I have to use inline code for an aspx page and I need to use a custom server control that is defined in the same aspx page but the control does not get processed as a server control. it gets returned as is as static html tag.
View 3 RepliesCustom Server Controls :: Custom Control's Children Do Not Persist Contents After Postback
Feb 25, 2011I have created a really simple custom control to render panels into a page. The code is below. When I use my control and add any webcontrol to it, after each page postback the contents of these child controls vanishes.
I must have missed something really simple but run the example to reproduce this. Can anyone please enlighten me as to why the controls are being 'emptied' of their contents, and how I stop this occuring?
Here is the code for the control
[Code]....
And here's how I am using it in a sample page:
[Code]....
[Code]....
Custom Server Controls :: Implementing An Interface From A Class Library In A Custom Control?
Jul 8, 2010I'm building an n-tier application, with the web client and the class library separate. I'm also using the factory pattern of development, using interfaces to act as containers for different objects they are associated with. The problem I'm expreriencing is that I declared a public interface class in the class library and I can create an instance of it in in my aspx pages but whenever I declare it in my custom control code-side, i get an error, like so:
Error 20 The type or namespace name 'IContentMaker' could not be found (are you missing a using directive or an assembly reference?)
notge that I have inherited the class library namespace using the 'using' keyword just in case you are wondering. My code is like so:
using System.Web.UI.HtmlControls;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Xml.Linq;
using TQO_Classes ; //importing the class library project
public partial class PageContentMgr : System.Web.UI.UserControl
{
private IContentMaker _data; //this line throws the error, it works fine on aspx pages
Custom Server Controls :: Register Tagprefix For A Custom Control That Inherits Treeview?
Jun 15, 2010 I have an ASP.net web application project written in VB. Am trying to test a cobbed-together "MyTreeview" control put together from C# code that's been converted.
I think this will come "close" to what I'm trying to do - just get a treenode to have a CSS tag and render properly.
I have an App_LocalResources directory and a file called CustomTreeNode.vb. Inside that file is the following code:
[Code]....
[Code]....
[Code]....
Custom Server Controls :: Custom Control With Collapsible Panel Extender - Keep State?
Dec 31, 2010I have a Custom Server Control with a Collapsible Panel Extender. I want to be able to keep the Collapsable state (open or closed) when doing a Post Back.
Here is my Custom Control's ASP code:
[Code]....
Custom Server Controls :: Custom Checkbox Control 'checked' Property Is Not Working?
Sep 3, 2010Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
Custom Server Controls :: Custom Checkbox Control 'checked' Property Is Not Working ?
Oct 15, 2010Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
Custom Server Controls :: Why Custom Control Write Data Only One Time
Dec 26, 2010I have built a custom control. when i add this custom control in my page twice or more then the it write only one time of its render contest data.
View 4 RepliesCustom Server Controls :: Show Only Literal Content In Custom Control
Jul 6, 2010I try to mak a custom textbox. Something pretty easy to do but I can't figure out one thing. When I write my textbox in designmode I have this <custom:Textbox runat="server" ID="Textbox1">Test</custom:Textbox> The problem is The textbox is a webcontrol I added to my class [Parsechildren(false)] like this [Parsechildren(false)]
public class Textbox : WebControl
{
}
now the problem is I want to able to write the Text from the textbox between the beginningtag and andingtag but I want to disable every other control in designmode. When I add < between the tags then you can see you can write all tags between it. disable all controls except literal between the tage in designmode?
Custom Server Controls :: Custom Control Design View Error
Aug 13, 2010I have created a custom control from scratch and it works fine as in you can build the project that uses it and it works fine at runtime. Problem is when you go to design view the control shows an error in the place of where the control should be rendered.
Error: '<SomeValue>' Could not be set to '<SomeProperty>'
This shows up on all my custom set properties. These properties are created as basic as possible. I can give the properties values in Source view and run the app just fine. I can even add a Onclick event. If I don't set any custom properties the control will render fine in Design view. It's only when I set a value to a custom property.
Property Code Example:
[Code]....
I've even removed the Category and Description tags with no difference.
I don't know if what I said makes sens, but I hope it does.
