I want to design custom control with ListView and datapager that take Query - As Input PagingSize - As Input
This custom control is suppose to be use in different aspx reporting pages
Hope this is the correct forum for this question. I am using VWD 2010 an have a web project and get the following error upon execution:
Parser Error Message: Unknown server tag 'custom:AjaxValidator'.
My code is as follows in the .cs file:
[Code]....
[Code]....
I am trying to build a custom composite control, which allows me to add custom content to each child control. It's a similar concept to what you have with a GridView and TemplateColumn. The markup used to place the control on the page would end up being something like this:
[Code]....
I have the code below, which allows me to put that markup on the page without throwing any errors, and it renders all the correct HTML, except it doesn't render the contents of the ColumnTemplate. I have replaced the Render() code with a comment because it's quite long winded and doesn't add anything important here:
[Code]....
I have tried to follow examples on MSDN and other forums but I can't make this work. I think I'm missing the code to render the contents of the template, but I don't know how to hook that up.
I have a custom control which inherit from the Table class and in the constructor, it takes a an integer as an argument. There is no empty constructor.
Is there a way for the user to set that variable in the properties window after they drag the control onto a form.
I know some .NET controls, you can set the source for the parameter to different things like another control's property, QueryString using just the properties window.
Right now, I have to create the control dynamically. I read the query string and then created the object.
here's a situation and I would appreciate your response.
I have programmatically created the Wizard control:
Page_Load(obj s, evargs e)
{
Wizard ClaimDetailWizard = new Wizard();
foreach(int item in selectedItems)
{
//create new step
//added custom control to new step
//add step to wizard
}
//added wizard to a placeholder on a page
}
Based on List I get from Session i added new steps to my wizard To each step I had added a custom control
Each custom control in tern contains another custom Gridview Control in it.
So here's the problem when the page loads for example for two steps. All is good Wizard does what it's supposed to do.
But when I try to use sorting or paging in that custom Gridview. Somehow it displays the gridview I should see in the next step of the wizard.
Also what I'm noticing through debugging. Is that when I press next in the wizard I go back to the original page where I do all of the code specified above, and it recreates the wizzard. But it goes to the next step. Is this the way wizard supposed to work? Just doesn't seem very efficient.
i am new to technology so go easy on this post according to what i read from web there are 3 type of custom server controls 1 superclass2 composite 3 renderedi found video tutorial for superclass custom server control but couldnt find video tutials for other 2.lease forward me link for composite and rendered custom server controls video tutorial
View 1 Repliescreated a Custom Textbox Control that is intended to be a "masked date" textbox, so that I can handle different ways a user might enter in a date and make it work no matter what.I did this by creating a custom control with 3 separate Textboxes one for month,one for day one for year,then do some handling for different things that could be entered and it would all work.
The problem I am having is,when I add this control to the page,if I do an alert to check the Text value of the custom control it just gives me "[ServerControl1]" even if I enter in a date.
I tried doing an AutoPostback after entering so that it would refesh the Viewstate to have the values of the textboxes but the control doesnt seem to actually postback, even though I have it enabled.accessing the Textbox value after someoen
has entered a date?first custom control I have created and have been using google.
My Server Control Code is as follows:
[Code]...
I am creating custom server control. I have two classes in project. One is main class that render control and another will be used to render content based on condition.I just want to know how to render content from other classes in main class.For example. This isjust an example.My main class code
[Code]....
My TopLeftPane class
[Code]....
My page code on page load event
[Code]....
When I run the page, Header title always getting null. This is a just sample code. I will have more than 20 classes so I dont want to write a code in main class to render whole control.I hope all of you understand my problem.
Case : a templatefield Text Box created by class TemplateHandler and added to the composite
control Grid .how to bind it to the DataSource Object of the Grid Class ?
I have to use inline code for an aspx page and I need to use a custom server control that is defined in the same aspx page but the control does not get processed as a server control. it gets returned as is as static html tag.
View 3 RepliesI have created a really simple custom control to render panels into a page. The code is below. When I use my control and add any webcontrol to it, after each page postback the contents of these child controls vanishes.
I must have missed something really simple but run the example to reproduce this. Can anyone please enlighten me as to why the controls are being 'emptied' of their contents, and how I stop this occuring?
Here is the code for the control
[Code]....
And here's how I am using it in a sample page:
[Code]....
[Code]....
I'm building an n-tier application, with the web client and the class library separate. I'm also using the factory pattern of development, using interfaces to act as containers for different objects they are associated with. The problem I'm expreriencing is that I declared a public interface class in the class library and I can create an instance of it in in my aspx pages but whenever I declare it in my custom control code-side, i get an error, like so:
Error 20 The type or namespace name 'IContentMaker' could not be found (are you missing a using directive or an assembly reference?)
notge that I have inherited the class library namespace using the 'using' keyword just in case you are wondering. My code is like so:
using System.Web.UI.HtmlControls;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Xml.Linq;
using TQO_Classes ; //importing the class library project
public partial class PageContentMgr : System.Web.UI.UserControl
{
private IContentMaker _data; //this line throws the error, it works fine on aspx pages
I have an ASP.net web application project written in VB. Am trying to test a cobbed-together "MyTreeview" control put together from C# code that's been converted.
I think this will come "close" to what I'm trying to do - just get a treenode to have a CSS tag and render properly.
I have an App_LocalResources directory and a file called CustomTreeNode.vb. Inside that file is the following code:
[Code]....
[Code]....
[Code]....
I have a Custom Server Control with a Collapsible Panel Extender. I want to be able to keep the Collapsable state (open or closed) when doing a Post Back.
Here is my Custom Control's ASP code:
[Code]....
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
I have built a custom control. when i add this custom control in my page twice or more then the it write only one time of its render contest data.
View 4 RepliesI try to mak a custom textbox. Something pretty easy to do but I can't figure out one thing. When I write my textbox in designmode I have this <custom:Textbox runat="server" ID="Textbox1">Test</custom:Textbox> The problem is The textbox is a webcontrol I added to my class [Parsechildren(false)] like this [Parsechildren(false)]
public class Textbox : WebControl
{
}
now the problem is I want to able to write the Text from the textbox between the beginningtag and andingtag but I want to disable every other control in designmode. When I add < between the tags then you can see you can write all tags between it. disable all controls except literal between the tage in designmode?
I have created a custom control from scratch and it works fine as in you can build the project that uses it and it works fine at runtime. Problem is when you go to design view the control shows an error in the place of where the control should be rendered.
Error: '<SomeValue>' Could not be set to '<SomeProperty>'
This shows up on all my custom set properties. These properties are created as basic as possible. I can give the properties values in Source view and run the app just fine. I can even add a Onclick event. If I don't set any custom properties the control will render fine in Design view. It's only when I set a value to a custom property.
Property Code Example:
[Code]....
I've even removed the Category and Description tags with no difference.
I don't know if what I said makes sens, but I hope it does.
I have a custom control, inherited from Button. This is the class definition for the control and 2 properties:
[Code]....
I show you 2 properties, only to illustrate the problem.
as you see Aplicacion property is of a custom type Sistema, and Roles property is of type List<UserRol>.
The Aplicacion property is rendered well, this way:
[Code]....
The problem I have is with List<UserRol>. I couldn't get it to be rendered. I expeect to be rendered this way:
[Code]....
Finally, this is the TypeConverter and Editor definitions for the list:
[Code]....
The UserRol class is a typical class, without any special attributes.
I have discovered that when I use the custom editor for Roles property, the collection is not persisted. When I use the default editor for the collection, the collection is persisted.
I have currently on multiple pages a modal popup that displays the information below, we are getting to the point where we need to call this popup from multiple locations, currently i have duplicate setups on each page that i want to use it on, but its becoming a mess to manage when a change is needed.. so im looking to see if what i have within the modal popup can be turned into a control that i can call anywhere thru out the site and have just 1 setup to maintain going forward..If its possible to create a control that can then be placed within the modal popup and server the same purpose that would be great any links here is what i have within the modal popup that i have on atleast 3 pages currently..
[Code]....
I have a custom control that I have created. I want to be able to pass in a Javascript snippet for a callback function. I am able to do this by passing a string back. The problem is that in the Javascript, I need to reference another server control that is not related to my custom control. So, I need to be able to pass in the ClientID of that control for use in the Javascript. Here is a snippet of what I am trying to do:
[Code]....
Now, I realize that '<%= chkStartDate.ClientID %>' will not be parsed. But, I need it to be parsed so the OnClientOnChangeEvent property of my custom control can take any Javascript for use as a callback. In this instance, I need to pass in the ClientID of the control for the Javascript function to find the control to work with; and this seems to be the one issue that I don't know how to handle.
When I implement Custom web control inheriting ASP.NET Menu Ajax is not working. I try to Override Render method and generate Li's rather than table.I try to use Control Adapters, but when I am not using adapters for some pages ithe base adapter is generating just hyperlinks with span. I do not want this way. So I can not use these.
View 1 RepliesI seriously want to learn how to create a custom server control, for that I made a requirement for myself, but lost on how to accomplish it.
Requirement -I want to create a cascading dropdownlist control - which should have following properties -1) ConnectionString - used to get data for the 1st dropdown from database, and also it is used by 2nd DropDown to get data.2) 1stSelectCommand - Used by the 1st DropDown to get data from the database.3) 2ndWhereCommand - used by the 2nd DropDown - uses the selected value from the 1st DropDown in the where clause to get data.
Methods - 1) DropDown1_SelectedIndexChanged()2) DropDown2_SelectedIndexChanged(3) CustomCascading_Changed() - this happens when any of the DropDowns index changed.
PS - This is a random requirement, of course it got nothing to do with any project or real time.I want to learn, so i incorporated basic concepts like Data Access, Custom Methods, Properties etc.PPS - I know how to create basic custom server control, so plz dont forward me links to how to create basic custom server controls. But in case with extrordinary links.
I have Created a custom CheckboxList as [Code]....
but when i am passing this cutom control another page via parameter to newxt page i am not able get the selected checkbox