I have a control that renders different children according to a property value. All works great until I add a rating control in the mix. I get the following:
Page cannot be null. ensure that this operation is being performed in the context of an ASP.NET request.
[Code]....
I am trying to included a rating control in a composite control that renders many different type of controls. I render the controls by overriding the rendercontents so that I can control the layout of the controls. When I try to add the rating control to the output i get a Page cannot be null error. Can someone provide me with the proper way to render a rating control from a composite control and be able to control the layout of the child controls.
View 3 RepliesSo I finally managed to create a control which basically shows a bunch of Panels with an extra property. I use it like this:
[Code]....
This renders fine and shows the text in the TabPanel controls. However, when I replace the plain text with something a little more exciting, say an UpdatePanel so it looks like this:
[Code]....
Then I get this weird error:
Page cannot be null. ensure that this operation is being performed in the context of an ASP.NET request.[InvalidOperationException: Page cannot be null. ensure that this operation is being performed in the context of an ASP.NET request.] System.Web.UI.UpdatePanel.get_IPage() +647672 System.Web.UI.UpdatePanel.Render(HtmlTextWriter writer) +20 SP.adminonly_reports_loginreport_aspx.__RenderTabPanel1(HtmlTextWriter __w, Control parameterContainer) in D:....eport.aspx:37 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115 System.Web.UI.WebControls.WebControl.RenderContents(HtmlTextWriter writer) +13 System.Web.UI.WebControls.WebControl.Render(HtmlTextWriter writer) +42 TabPanels.TabPanelHolder.Render(HtmlTextWriter w) in D:e4Webwwwrootlms_workingTabPanelsTabPanelsTabPanelHolder.vb:146 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) +253 System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) +87 System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) +53 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.Page.Render(HtmlTextWriter writer) +38 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240
If I take out the UpdatePanel and replace it with an ASCX control I made that simply puts database data into some DropDownLists, like this...
[Code]....
Then the page loads, but the data is not loaded into CustomerUserList1, and the dropdownlists within it are all blank. CustomerUserList1 has worked fine for years when used directly in a normal Panel/Page UpdatePanel.
[Code]....
Hope this is the correct forum for this question. I am using VWD 2010 an have a web project and get the following error upon execution:
Parser Error Message: Unknown server tag 'custom:AjaxValidator'.
My code is as follows in the .cs file:
[Code]....
[Code]....
I have created a custom control from scratch and it works fine as in you can build the project that uses it and it works fine at runtime. Problem is when you go to design view the control shows an error in the place of where the control should be rendered.
Error: '<SomeValue>' Could not be set to '<SomeProperty>'
This shows up on all my custom set properties. These properties are created as basic as possible. I can give the properties values in Source view and run the app just fine. I can even add a Onclick event. If I don't set any custom properties the control will render fine in Design view. It's only when I set a value to a custom property.
Property Code Example:
[Code]....
I've even removed the Category and Description tags with no difference.
I don't know if what I said makes sens, but I hope it does.
I was referred here by MSDN forums hope this is the right place - I have a custom control (:WebControl) that renders web.sitemap in a specific way. While it runs error free and produces the expected result, at Design-Time it complains
[Code]....
and have tried the SiteMapDataProvider Tag with and without the SiteMapProvider
attribute.Does anybody have (a) any experience with this, or (b) any suggestions as to how to track down the problem?
I'm building a dynamic form using XML and XSLT. Anyway I'm using a custom asp.net control for CKEditor, it's an HTML editor.
When I try to add the controls from the XSLT using Page.ParseControl(<the-string-from-the-xslt-here>), I get a warning saying:
Unknown server tag 'FCKeditor.CKEditor'
And of course, if I remove the control from the XSLT everything is working fine and all the regular asp.net controls like TextBox etc get rendered to the string just fine. Does anyone know what I can do about it?
I have a rating control that shows the average rating of a user supplied posting (think of a forum post that others will rate). So if the average rating for that posting is lets say 3 out of 5 all users will see 3 stars. If someone wants to rate the posting, then they could click lets say 4 stars and I save the rating to the database, re-average the current rating and display the result (which may or may not still be 3 at this point). So far so good. The problem comes in when a user wants to agree that it's 3 stars. Since the rating control currently shows 3 stars, choosing 3 again does not cause a postback. In my case even though the value didnt technically change, I need to capture the users choice so I can average it in and save that users rating. I also modify the UI so that I can show each user of the site what he/she choose as a rating.How can i get the control to let me know that a user choose a star rating even if its the same one the control is currently displaying?
View 3 Repliescreated a Custom Textbox Control that is intended to be a "masked date" textbox, so that I can handle different ways a user might enter in a date and make it work no matter what.I did this by creating a custom control with 3 separate Textboxes one for month,one for day one for year,then do some handling for different things that could be entered and it would all work.
The problem I am having is,when I add this control to the page,if I do an alert to check the Text value of the custom control it just gives me "[ServerControl1]" even if I enter in a date.
I tried doing an AutoPostback after entering so that it would refesh the Viewstate to have the values of the textboxes but the control doesnt seem to actually postback, even though I have it enabled.accessing the Textbox value after someoen
has entered a date?first custom control I have created and have been using google.
My Server Control Code is as follows:
[Code]...
I have to use inline code for an aspx page and I need to use a custom server control that is defined in the same aspx page but the control does not get processed as a server control. it gets returned as is as static html tag.
View 3 RepliesI have implemented a custom ErrorController with UnknownError Action returning the View "~/Error/UnknownError" (not inside the Shared folder).
I have also modified the web.config file and add in custom errors section the following[Code]....
Inside the UknonwnError page i would like to display some information concerning the error occured using the HandleErrorInfo.
To test the error handling mechanism, i throw a custom ApplicationEcxeption from my Home/About controller action that is handled via the HandleErrorAttribute on the controller level.
The result is to get another unhandled exception thrown from the UknownError page due to the fact that HandleErrorInfo model is null.
I am now doing a project mobile musical website. I have used Ajax Toolkit in my last project and so that I know how to install it and work with it...
I have used CalenderExtender, TextboxWatermark, Password Strength, etc. But I am not familiar with the rating control. How does it work ?
Article [URL] .....
Above article show rating only integer part .
How can i show decimal rating on ajax rating control not any labels?
I have a custom control that renders different controls based on a property value. This all works correctly until i try and add a rating control to the control. When i render both controls in the CreateChildControls the control is rendered properly.
However when i try to add layout by overriding the RenderContents method and rendering controls there, an error is generated
Extender controls may not be registered after PreRender.The code shows both methods of creating the controls.
[Code]....
I am trying to convert 22 rating control currentrating values to a double instead of int
I am also displaying in a label control so it is converted to String here is what I have
[Code]....
My display label displays
Rating is x stars out of 5.0 stars
I also record the results in a decimal 1.1 form
I did Convert.ToDouble(rate1.CurrentRating) + Convert.ToDouble(rate2.CurrentRating) .....
but I get a 7 digit after 0 return, how do i round that to a single point?
I am using AJAX Rating Control.I want half star rating.For Example,If My AVG Rating Count is 3 Then My Stars Wants to be show 3If My AVG Rating Count is 2.5 Then My Stars Wants to be Show 2 1/2 mark i.e., two & half stars.But,it was not showing then also it is showing 3 stars.
View 1 Repliesi have a user control page and only have , which i have <div> and a gridview inside <div>how can i add a scroll bar in user control page?the code like below in aspx:<@regrister url="user control page" tagname="xx" tagprefix="aa"><div><aa: id="xx"></div> <--to embed user control page.
View 3 RepliesI have a custom control which inherit from the Table class and in the constructor, it takes a an integer as an argument. There is no empty constructor.
Is there a way for the user to set that variable in the properties window after they drag the control onto a form.
I know some .NET controls, you can set the source for the parameter to different things like another control's property, QueryString using just the properties window.
Right now, I have to create the control dynamically. I read the query string and then created the object.
We are creating a composite server control. It will have few other controls. I am confused where exactly to write the code ie in which event. Is page life cycle and control life cycle follow the same event order?
View 2 Replieshere's a situation and I would appreciate your response.
I have programmatically created the Wizard control:
Page_Load(obj s, evargs e)
{
Wizard ClaimDetailWizard = new Wizard();
foreach(int item in selectedItems)
{
//create new step
//added custom control to new step
//add step to wizard
}
//added wizard to a placeholder on a page
}
Based on List I get from Session i added new steps to my wizard To each step I had added a custom control
Each custom control in tern contains another custom Gridview Control in it.
So here's the problem when the page loads for example for two steps. All is good Wizard does what it's supposed to do.
But when I try to use sorting or paging in that custom Gridview. Somehow it displays the gridview I should see in the next step of the wizard.
Also what I'm noticing through debugging. Is that when I press next in the wizard I go back to the original page where I do all of the code specified above, and it recreates the wizzard. But it goes to the next step. Is this the way wizard supposed to work? Just doesn't seem very efficient.
i am new to technology so go easy on this post according to what i read from web there are 3 type of custom server controls 1 superclass2 composite 3 renderedi found video tutorial for superclass custom server control but couldnt find video tutials for other 2.lease forward me link for composite and rendered custom server controls video tutorial
View 1 RepliesI am creating custom server control. I have two classes in project. One is main class that render control and another will be used to render content based on condition.I just want to know how to render content from other classes in main class.For example. This isjust an example.My main class code
[Code]....
My TopLeftPane class
[Code]....
My page code on page load event
[Code]....
When I run the page, Header title always getting null. This is a just sample code. I will have more than 20 classes so I dont want to write a code in main class to render whole control.I hope all of you understand my problem.
Case : a templatefield Text Box created by class TemplateHandler and added to the composite
control Grid .how to bind it to the DataSource Object of the Grid Class ?
I am trying to build a custom composite control, which allows me to add custom content to each child control. It's a similar concept to what you have with a GridView and TemplateColumn. The markup used to place the control on the page would end up being something like this:
[Code]....
I have the code below, which allows me to put that markup on the page without throwing any errors, and it renders all the correct HTML, except it doesn't render the contents of the ColumnTemplate. I have replaced the Render() code with a comment because it's quite long winded and doesn't add anything important here:
[Code]....
I have tried to follow examples on MSDN and other forums but I can't make this work. I think I'm missing the code to render the contents of the template, but I don't know how to hook that up.
My intention is to give the user a flexible user control on a master page that does the following:
When navigating, a child page will pass the URL (with querystring) and PageTitle to the user control. The user control will take those two parameters and insert them as a "breadcrumb" object at first index of a List<breadcrumb> collection
This part works fine through the use of a Repeater with a LinkButton contained in an ItemTemplate. The user sees each of the pages he has been visiting in descending order, the provided benefit is a quick way to re-open records they have recently modified or created.
The part I'm having trouble handling is what happens when the user clicks the LinkButton, which is that the child page adds a new reference to the URL at the beginning of the List<> collection and I cannot seem to control the behavior of removing the LinkButton before it gets re-created. What I've tried doing is:
List<>.RemoveAt(RepeaterCommandEventArgs.Item.ItemIndex);
Repeater1.Controls.Clear();
Repeater1.DataSource = List<>;
Repeater1.DataBind();
While that should work, my CreateBreadCrumb(string url, string title) function gets called by the child page before the UserControl detects the Repeater1_ItemCommand event, so in effect it appears that the wrong ItemIndex is being used for removal.