Custom Server Controls :: Composite Control - Mismatching The Result?
Nov 3, 2010
I am creating a composite control. On the selection of item in the dropdownlist, the result should be shown. But its mismatching the result. Here is the code for the control:
[Code]....
If I have a breakpoint on the selection index changed event of the dropdownlist, then on every selection it should go to the event. Problem is when I select an item which makes the "singlelineText" textbox to appear and after it I select any other item, it doesn't stop at the dropdown event instead it goes to the "CreateChildControls" method of the composite control which results in wrong data.
i am new to technology so go easy on this post according to what i read from web there are 3 type of custom server controls 1 superclass2 composite 3 renderedi found video tutorial for superclass custom server control but couldnt find video tutials for other 2.lease forward me link for composite and rendered custom server controls video tutorial
I am trying to build a custom composite control, which allows me to add custom content to each child control. It's a similar concept to what you have with a GridView and TemplateColumn. The markup used to place the control on the page would end up being something like this:
[Code]....
I have the code below, which allows me to put that markup on the page without throwing any errors, and it renders all the correct HTML, except it doesn't render the contents of the ColumnTemplate. I have replaced the Render() code with a comment because it's quite long winded and doesn't add anything important here:
[Code]....
I have tried to follow examples on MSDN and other forums but I can't make this work. I think I'm missing the code to render the contents of the template, but I don't know how to hook that up.
I am trying to included a rating control in a composite control that renders many different type of controls. I render the controls by overriding the rendercontents so that I can control the layout of the controls. When I try to add the rating control to the output i get a Page cannot be null error. Can someone provide me with the proper way to render a rating control from a composite control and be able to control the layout of the child controls.
I made a composite control that contains a ListBox. I am using the Composite Control throughout my application but I can not bind the listbox in the Compositecontrol. I have setup a Public get to access my listbox in the composite control.
I am trying to make a PhoneNumber Control. I inherit from Composite Control. It contains 5 controls : 1 Label (Text to show before), 3 TextBoxes(area, prefix and line) and a Custom Validator. What I want to happen is the validator to validate the control is belongs to in two ways: 1. that the field is required and 2. That the COMBINED text of the 3 textboxes is 10 digits. I believe i can accomplish this with the expression ^d{10}$. Now I have it about halfway working, it will validate the control using client-side embeded validation on a submit click, however I need the control to validate as soon as the text of any of the boxes changes. I know this is done on the aspx page by using a Custom Validator -> specifying client and server side validation functions -> and then at end of page doing ValidatorHookupControlID(control, va lidator). My goal is to do all of this within the control to clean aspx code and make it more reusable.
My CompositeControl creates dinamically several RadioButtonLists according to the DataSource information. These controls are added to the Controls list and rendered in CreateChildControls event.
I need to create a LinkButton that clear a specific RadioButtonList selection and do a postback, to load the DataSource information again (some selections changes the data that need to be loaded from the database). For each RadioButtonList, I've put a LinkButton and assigned the Click Event to a method inside the same CompositeControl, to do the RadioButtonList cleaning.
Unfortunatelly, the LinkButton doesn't trigger the Click Event. In HTML code, the link has the "onclick" attribute setted with the asp.net event, but when clicked, nothing happens.
I would like to ask you what is the best practice for developing composite user web control with multiple controls inside from the stand point of dealing with properieties. In my situation I would like to use header menu bar with logos, buttons, java baset visible/hidden menus itc as web control. I was successfull in implementing new control in my project.
But my question goes to issue of properties for ALL OF controls. I know how to hard code all required properties like: text, visible, enable for all controls. It's a lot of work. ( This is the very edge of my asp.net comprehension ) Is there a more elegant way provide an access to controls's properties without hard coding seperatelly?
I have a composite user control consisting of three standard table cells (a legend, an image with a tool tip, and a text field control). If I add these to a TableRow in my aspx page it works fine and produces legal HTML in my source. The below works fine ...
However when I try to do the same programmatically (C#) the TableRow won't accept anything in its Controls collection that isn't a TableCell. I could make my control a nested table in its own right but I lose the alignment of my form items on the page with multiple controls, as each table aligns itself according to its contents. Is there anyway I can make the TableRow accept my control as collection of cells or do I need to do some casting or making my user control inherit some kind of TableCell attributes? I can also dynamically add my controls to a TableCell item which actually displays OK in IE but creates illegal HTML (<td><td></td><td> ... </td></td> - I assume this is illegal) in my resulting source. The code below DOES NOT work ...
I have a composite control that returns a different control depending on a property value. The works however I can't seem to set the value of a textbox or the selected item in a dropdown list. Code does not produce error. What am i missing here??
I'm trying to develope a collapsible panel control with designer.
I have the following two classes:
[Code]....
and this one:
[Code]....
In fact, the designer class is a copy of a sample class in MSDN and I only tried to customize it to work for me. I'm not sure if all methods are necessary or not.
I have the following two questions:
1- When I use this contrl in design mode, I can add or delete controls to it, in the html view, tags are not updated. so when I close the page and open it again, all changes are lost.
2- I have added this control to the same asp.net project that is using this control. Isn't there any way to have this controil in tool box?
I want to write own control which can contain other. And I want to define content of the control in the .aspx file where the control is defined. I have written such control. But now I have issue with ViewState of inner controls of my control. The following samle illustrates the issue: I defined two asp:DropDownList ID="ddl1" and ID="ddl2" One of them is inside of my control and other is outside. When posback is occurred asp:DropDownList ID="ddl1 loses state and becomes empty. How to say ASP.net to store state of inner controls defined by this way?
MyControl.ascx:
<%@ Control Language="C#" AutoEventWireup="true" CodeBehind="MyControl.ascx.cs" Inherits="DynamicControls.Controls.MyControl" %>
If a composite server control normally encapsulate styling information inside, it is an example of code encapsulation and modularization. However if css properties are included inside the composite control, it is not ideal for code/styling separation and css code re-use principles. Now which consideration should be the main consideration?
We are creating a composite server control. It will have few other controls. I am confused where exactly to write the code ie in which event. Is page life cycle and control life cycle follow the same event order?
I am writing a custom composite WebControl and want to expose styles of child controls it encapsulates to the ASP.NET designer. The code I currently have is similar to the skeleton below (which for simplicity only has one child control).
With the code below, I can see property "ChildPanelStyle" in the designer, but when I try to modify one of the properties (e.g. CssClass) in the designer, it immediately resets itself to its default value. It looks like the designer serialization isn't happening.
What am I doing wrong?
UPDATE
I've updated the sample with an additional style property that is managed directly by the custom control, rather than simply being the property of a child control.
The HeaderStyle property is persisted properly by the designer, but the ChildPanelStyle property isn't.
Of course I could manage all my styles like HeaderStyle, and apply them during rendering, but I'm hoping there's a simpler solution whereby child controls can take care of themselves, and I don't need any custom rendering.
I have a custom control which inherit from the Table class and in the constructor, it takes a an integer as an argument. There is no empty constructor.
Is there a way for the user to set that variable in the properties window after they drag the control onto a form.
I know some .NET controls, you can set the source for the parameter to different things like another control's property, QueryString using just the properties window.
Right now, I have to create the control dynamically. I read the query string and then created the object.
here's a situation and I would appreciate your response.
I have programmatically created the Wizard control:
Page_Load(obj s, evargs e) { Wizard ClaimDetailWizard = new Wizard(); foreach(int item in selectedItems) { //create new step //added custom control to new step //add step to wizard } //added wizard to a placeholder on a page }
Based on List I get from Session i added new steps to my wizard To each step I had added a custom control
Each custom control in tern contains another custom Gridview Control in it.
So here's the problem when the page loads for example for two steps. All is good Wizard does what it's supposed to do.
But when I try to use sorting or paging in that custom Gridview. Somehow it displays the gridview I should see in the next step of the wizard.
Also what I'm noticing through debugging. Is that when I press next in the wizard I go back to the original page where I do all of the code specified above, and it recreates the wizzard. But it goes to the next step. Is this the way wizard supposed to work? Just doesn't seem very efficient.
created a Custom Textbox Control that is intended to be a "masked date" textbox, so that I can handle different ways a user might enter in a date and make it work no matter what.I did this by creating a custom control with 3 separate Textboxes one for month,one for day one for year,then do some handling for different things that could be entered and it would all work.
The problem I am having is,when I add this control to the page,if I do an alert to check the Text value of the custom control it just gives me "[ServerControl1]" even if I enter in a date.
I tried doing an AutoPostback after entering so that it would refesh the Viewstate to have the values of the textboxes but the control doesnt seem to actually postback, even though I have it enabled.accessing the Textbox value after someoen has entered a date?first custom control I have created and have been using google.
