Trying simple delete against a Photo table but hitting error as conversion type error.
[Code]....
Is there a better way to write this sql statement? or convert the UserId to int32 before executing? Not sure how to do that.
This is the Firefox error console window when I clicked on any page.
Error: Sys.WebForms.PageRequestManagerServerErrorException: Conversion failed when converting from a character string to uniqueidentifier.
Source File:
[URL]
And here's the aspx code:
[Code]....
And here's the RowCommand method:
[Code]....
Her'es the SQLDataSource adapter control:
[Code]....
how I can get around the following error with the following code?
[Code]....
Error: Msg 8169, Level 16, State 2, Line 1 Conversion failed when converting from a character string to uniqueidentifier. As you can probably tell, the datatypes are: m.UserId = uniqueidentifier l.System_User_ID = varchar(256) I was hoping the casting of one to the other would solve the issue, but it doesn't. How can I re-code this? I see from other forums it would probably be best to set all these fields to uniqueidentifier, but would prefer not to at this stage as it will involve changing quite a bit throughout the whole site!
I am trying to retrieve xml from a small function in my .cshtml page. Its throwing me an error. This however, runs fine in a console/form environment. It takes 3 parameters and 1 exception.
[Code]....
Within my GetXML function it simply applies the parameters to a store procedure. The store procedure returns me my object. From there I can do all the fun stuff in .cshtml. When I manually enter the values from within SQL Management Studio, I do in fact get the right result. Again, when I create a Window Form application - I too get the right result! When it comes down to .cshtml or .aspx pages - I get the conversion failed. I have already tried casting the store procedure uniqueidentifier parameter and it still gave me that error.
I have a database call that is comparing UserID column of two tables. The UserID is a uniqueidentifier. The page errors on the r.read() line with Conversion failed when converting from a character string to uniqueidentifier. I'm not sure how to code this to avoid the error.
cmd.CommandText = "SELECT a.CenterName FROM Centers a INNER JOIN UserInfo u ON a.CenterID = u.CenterID WHERE u.UserID='{ + SessionManager.UserID + }'";
r = cmd.ExecuteReader();
r.Read();
I am trying to match a username to a userid which are in 2 different sql tables. Here is my select statement:
SELECT aspnet_Users.UserName
FROM aspnet_Users INNER JOIN
aspnet_starterkits_Projects ON aspnet_Users.UserName = aspnet_starterkits_Projects.ProjectManagerId
When I run this i get an error message: "Conversion failed when converting from a character string to uniqueidentifier" Is there anyway around this? Or a different select statement etc?
Using the following quires, for select and Update,. Select qry is working fine ,but update qry throws 'conversion failed when converting datetime from character string' .
select * from table1 where CreatedDt >= convert(datetime,'12/23/2009',101) and createdDt < dateadd(d,1,convert(datetime,'12/23/2009',101))
Update Table1 set status = 'y' where CreatedDt>= convert(datetime,'12/23/2009',101) and CreatedDt < dateadd(d,1,convert(datetime,'12/23/2009',101)
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[SP_ORDER_LIST]
@EmailId nvarchar(50)
AS
begin
declare @Id int
set @Id = (select SellerId from cart_seller_master where EmailId = @EmailId )
select
CTD.OrderId,CTD.Product_code,
CPM.product_name,CTD.Quantity,CTD.Orderdate,
case when convert(datetime,isnull(CTD.DispatchedDate,null)) is null then 'Not Dispatched'
end DispatchedDate ,
case when convert(datetime,isnull(CTD.DeliveryDate,null)) is null then 'Not Dispatched'
end DeliveryDate
from cart_Product_master as CPM
left outer join cart_Transaction_details as CTD on ctd.product_code=cpm.product_code
where CPM.SellerId = 1
group by CTD.OrderId,CTD.Product_code,
CPM.product_name,CTD.Quantity,CTD.Orderdate,
CTD.DispatchedDate,CTD.DeliveryDate
end
I am developing a C# VS 2008 / SQL Server 2005 Express website application. I have tried some of the fixes for this problem but my call stack differs from others. And these fixes did not fix my problem. What steps can I take to troubleshoot this?
System.Data.SqlClient.SqlException was caught
Message="Conversion failed when converting datetime from character string."
Source=".Net SqlClient Data Provider"
ErrorCode=-2146232060
LineNumber=10
Number=241
Procedure="AppendDataCT"
Server="\\.\pipe\772EF469-84F1-43\tsql\query"
State=1
StackTrace:
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at ADONET_namespace.ADONET_methods.AppendDataCT(DataTable dt, Dictionary`2 dic) in c:Documents and SettingsAdminMy DocumentsVisual Studio 2008WebSitesJerryApp_CodeADONET methods.cs:line 102
And here is the related code. When I debugged this code, "dic" only looped through the 3 column names, but did not look into row values which are stored in "dt", the Data Table.
public static string AppendDataCT(DataTable dt, Dictionary<string, string> dic)
{
if (dic.Count != 3)
throw new ArgumentOutOfRangeException("dic can only have 3 parameters");
string connString = ConfigurationManager.ConnectionStrings["AW3_string"].ConnectionString;
string errorMsg;
try
{
using (SqlConnection conn2 = new SqlConnection(connString))
{
using (SqlCommand cmd = conn2.CreateCommand())
{
cmd.CommandText = "dbo.AppendDataCT";
cmd.CommandType = CommandType.StoredProcedure;
cmd.Connection = conn2;
foreach (string s in dic.Keys)
{
SqlParameter p = cmd.Parameters.AddWithValue(s, dic[s]);
p.SqlDbType = SqlDbType.VarChar;
}
conn2.Open();
cmd.ExecuteNonQuery();
conn2.Close();
errorMsg = "The Person.ContactType table was successfully updated!";
}
}
}
i want to search record with dropdown list and text box
i have fields in dropdown like
1.Orthopedics
2.Clinic
3.Pharmacy
4.ENT
when i select one field and type date in text box i want a list of record submitted on this date with the specific field
I Tried This
protected void Button1_Click(object sender, EventArgs e)
{
DateTime date1 = Convert.ToDateTime(TextBox1.Text);
con.Open();
[Code]....
conversion failed when converting date and/or time from character string
I'm trying to submit my form into the database but I'm getting this error on the cmd.ExecuteNonQuery() section:
Conversion failed when converting datetime from character string.
I have three date fields (in bold below) and in the database they are set up as datetime (8).
What am I missing:
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim conn As Data.SqlClient.SqlConnection = New Data.SqlClient.SqlConnection("Data Source=cmssolutions.db.9373013.hostedresource.com; Initial Catalog=cmssolutions; User ID=CMSSolutions; Password=CMSMedical1")
If BMItxt.Text = "" Then
BMItxt.Text = "01/01/1900"
[Code] ....
I am getting an error when attempting to call a stored proc from my asp.net page.
e.Message = "Conversion failed when converting character string to smalldatetime data type."
The stored proc is being called by:
The asp.net code that is calling the stored proc is:
[Code]....
I am passing parameters to a stored proc and the asp.net code block is:
[Code]....
I am getting an error message: e.Message = "Conversion failed when converting datetime from character string." when ada.Fill(ds) is executed.
What would be causing the error?
I am getting an error when attempting to call a stored proc from my asp.net page.
e.Message = "Conversion failed when converting character string to smalldatetime data type."
The stored proc is being called by:
The asp.net code that is calling the stored proc is:
//Display search results in GridView;
SqlConnection con = new SqlConnection(strConn);
//string sqlItemSearch = "usp_Item_Search";
SqlCommand cmdItemSearch = new SqlCommand(sqlItemSearch, con);
[Code]....
I get this error when I am trying to concatenate the two fields in bold into one field for a datagrid.
select count(cp.iOwnerID) as enrolled,(duration + '' + duration_interval) AS Duration ,session_id,school_id as SchoolId,program_id as ProgramId,convert(nvarchar(10),session_start_date,101) as SessionStartDate, session_class_size as SessionClassSize from dbo.cnSchoolProgramSessions cn with (nolock) left join customerproduct cp on convert(datetime,convert(nvarchar(10),session_start_date,101)) = convert(datetime,convert(nvarchar(10),cp.dtPurchasedate,101)) where record_status = 1 and school_id = '" &
iSchool & "' and program_id = '" & iProgram & "' and (CP.chProductNumber = '" & Me.Label5.Text & "' or CP.chProductNumber IS NULL) group by session_id, school_id, program_id,session_start_date,session_class_size,duration,duration_interval
we are using transactional replication on an sql 2008 server. we try now to add a table to the replication that only consists of 1 culomn of type date and we insert the dates to the table. when we then create the replication we are getting an error on the creation of the snapshot. here is the create table with the insert dates:
USE [Product]
GO
/****** Object: Table [TimeSlices].[BaseDate] Script Date: 05/03/2010 15:52:24 ******/
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[TimeSlices].[BaseDate]') AND type in (N'U'))
DROP TABLE [TimeSlices].[BaseDate]
GO
USE [Product]
GO
/****** Object: Table [TimeSlices].[BaseDate] Script Date: 05/03/2010 15:52:24 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [TimeSlices].[BaseDate](
[TargetDate] [date] NOT NULL,
CONSTRAINT [PK_BaseDate] PRIMARY KEY CLUSTERED
(
[TargetDate] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
INSERT INTO [TimeSlices].[BaseDate] SELECT TargetDate FROM [TimeSlices].UDF_GetTravelDateRange(GETDATE()-2 , GETDATE()+1000)
attached is the UDF:
[Code]....
this is the add article:
use [Product]
exec sp_addarticle @publication = N'Product$(QuoteNumber)', @article = N'BaseDate', @source_owner = N'TimeSlices', @source_object = N'BaseDate', @type = N'logbased', @description = null, @creation_script = null, @pre_creation_cmd = N'drop', @schema_option =
0x000000000803509F, @identityrangemanagementoption = N'manual', @destination_table = N'BaseDate', @destination_owner = N'TimeSlices', @vertical_partition = N'false', @ins_cmd = N'CALL sp_MSins_TimeSlicesBaseDate', @del_cmd = N'CALL sp_MSdel_TimeSlicesBaseDate',
@upd_cmd = N'SCALL sp_MSupd_TimeSlicesBaseDate'
GO
this is the error we get:
Message: Query for data failed
Stack: at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.ThrowNativeBcpOutException(CConnection* pNativeConnectionWrapper)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint, String strWhereClause,
Boolean useTableLockHint, Int32 bcpFileFormatVersion)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.BcpOutThreadProvider.DoWork(WorkItem workItem)
at Microsoft.SqlServer.Replication.WorkerThread.NonExceptionBasedAgentThreadProc()
at Microsoft.SqlServer.Replication.AgentCore.BaseAgentThread.AgentThreadProcWrapper() (Source: MSSQLServer, Error number: 0)
Message: Conversion failed when converting date and/or time from character string.
Stack: (Source: MSSQLServer, Error number: 241)
why we are getting the conversion error on the snapshot creation?
I am a newbie in ASP.NET. I am facing this problem. I need to insert data into my database, where is primary key uniqueidentifier. I am using FormView and if I insert data there is an error. In asp:Parameter there is no datatype, which is support uniqueidentifier.
View 5 Repliesthere is eny way to convert a string type to uniqueidentifier type .... when i insert or update data , i can give string as a parameter or i must to convert to uniqueidentifier type.?
View 4 RepliesI get the following error "Conversion failed when converting the varchar value ' (' to data type int." when executing this code
View 2 Replies<Conversion failed when converting the varchar value 'ID' to data type int.>am trying to insert datavalueField for a drop down list into a table column, its type is int. am using this syntax
[Code]....
I am using the abobe code to encrypt and decrypt a query string ID number.Any ideas to how to make this work with id numbers?Bellow is the code and store procdure.
[Code]....
I have a query in SQL Server 2008:
[Code]....
Everything looks fine but I keep getting the error: 'Conversion failed when converting the nvarchar value 'xxxx' to data type int... where xxxx is the the value of @Query.
I have a table for R&D which has following cols:
EmpID|EmpName|EmpLname|
and i want to insert values using parameters from Stored procedure as:
declare @EMPID int;
declare @EmpName varchar(50);
Declare @EmpLname varchar(50);
Declare @aa varchar(max);
[code]...
once executing, I am getting following error: Conversion failed when converting the varchar value 'insert into Employee(EMPID,EMPNAME,EMPLname) select ' to data type int.
i am getting this error this my c# code
Collapse | Copy Code
string Patient_name = NameTxtBx.Text, Export_TO = ToTxtBx0.Text;
int PatNoVal;
PatNoVal = Convert.ToInt32(PatNo.Text);
PatNoVal = int.Parse(PatNo.Text);
decimal PatID = decimal.Parse(PatID_NO.Text);
[Code] .....
how can in sql server show two columns as one column.. one of them is nvarchar and the other is int from two tables i have did this but it give error
select depart.depart_name+input_comp.no_of_depart as department,dbo.depart.depart_id from dbo.depart inner join dbo.input_comp on dbo.depart.depart_id=dbo.input_comp.depart_id group by depart.depart_name,dbo.depart.depart_id,input_comp.no_of_depart
the depart_name is nvarchar datatypeand the no_of_depart is int datatype
the error is
Conversion failed when converting the nvarchar value to data type int.