The title pretty much says it all.
I'm trying to pass the selected value of a dropdown list to a stored procedure that will return a set of results based on the value passed.
I've changed the definition on one of my tables by removing a field from my data key. However, I still want to pass this field to my stored procedure that inserts fields into this table from another table. The field in question is called ignum. I was using the code
[Code]....
how can i pass a session variable in a C# web form to a stored procedure..?
View 1 RepliesIve tried a few ways of doing this without success and got together a simplified example so hopefully I can get an answer. When I try to INSERT using a stored procedure InsertTest (normal SQL works OK) I cannot. I need to know how to pass the @Model parameter to the Stored procedure
Have a Stored procedure which can be executed and after entering string for @Model through wizard a new record is created
My asp:SqlDataSource includes InsertCommand="InsertTest" InsertCommandType="StoredProcedure"
Also my <InsertParameters includes the asp:Parameter Name="Model" Type="String"/>
My drop down (and I think this is where the problem is ). Record is Inserted after choosing Model and pressing enter
Do I have to set one of the properties in the drop down to tell the Stored procedure the parameter being passed is the parameter Model ??
[Code]....
.cs code is
[Code]....
and .aspx code is
[Code]....
now i want to pass value in Reply.aspx?C={0} to stored procedure
I have a form that I need to add a new multiple selection criteria. I added a List Box and I populate it on Load. After user selected his choices I need to pass the values to SQL Select stored procedure. I use C# and SQL. I am not sure how to pass the values and write SQL statment that would select records with the selected values. I also have RAD Teleric list box but again the values need to be passed to sql.
i have a listview control with two textboxes in each row. i am to fill those and save their values in one/more than one database tables using a stored procedure.
i currently create a comma-separated string (using a string builder) of all the values, and then pass it as a parameter to the SP.
in the SP i extract the values, and put them into my tables.
Girdview has dropdownlist TemplateField called ddlSate, how to bind state field value in sql table to selected value of ddlState dropdownlist control? For example the sql table has AL value for state field, (Note by default ddlState lists all states options with sqldatasource), how AL is selected in ddlState when binding to ddlState?
Secondly, when user selects different state like GA, how below update stored precedure works? that means how to find ddl selected value in update procedure as shown below question mark line:
Here is part code:
<asp:GridView ID="gvOrder" runat="server" DataSourceID="ods1" AutoGenerateColumns="False"
style="margin-top: 11px" CssClass="pnlOrdercss" ScrollBars="Both"
BorderColor="Black" BorderWidth="1px">
<Columns>
[Code]....
How do I pass the ID and SelectedDate values in to the stored procedure as parameters??
[Code]....
basically i have two dropdown boxes to filter data and textbox with stored procedure bound to gridview.i want to be able to query data depending on the selected value passed,either using one or more parameter values.
i would like seperate sqlcommands to chose from depending on which controls i select to pass parameters.
i have included a parameter Select(control id) as this is declared by the wizard for stored procedure.
but i am not sure how it is defined on the page and passed to procedure.
[Code]....
In my application I have 7 listboxes.Each list box has morethan 100 listitems.
the best way to pass the selected listitem values(including text values also) to stored procedure in sql server 2005.
This is surareddy. i nead some small clarification in the "Stored Procedure"
how to convert the oracle Stored Procedure to sqlserver2005/2008 Stored Procedure.
right now i am enhancing the project that project already developed the oracle Stored Procedure. now our company is using sqlserver 2005/2008.
how to convert the Oracle Stored Procedure to sqlserver 2005 Stored Procedure
Initially, I have tried to use stored procedure. But I changed my mind and preferred to call sql query in codebase with command text. However, it stills tries to find initially-called stored procedure (which is neither called or exists).I think that it is related caching. But I tried it with different browsers it did not work.What might be the reason?
View 4 RepliesDoes anybody if it is possible that a stored procedure returns rows which is the result of the execution of another sp? Something like..
[Code]....
i want to return output parameter from 1 storeprocedure. into another stored procedure.
View 7 RepliesI want to apply other stored procedure select query on result of first stored procedure.
View 1 RepliesI am using Visual Studio 2008 and SQL Server 2008 and have added a SQL datasource to my form.
When I configure the datasource, I choose my connection string which looks like this in my webconfig:
<connectionStrings>
<add
name="PSFSPRD_ConnectionString"
connectionString="Data
The database I am using has a schema called EQB and as such, my stored procedures are named as EQB.usp_SelectFunds, EQB.usp_SelectAccount, etc.
On the select tab of the Configure Data Source screen, I choose to use a stored procedure. The dropdown shows my stored procedures, however, the schema name does not show up in front of the stored procedures in the drop down. I see only usp_SelectFunds, usp_SelectAccount, etc.
I select one of the stored procedures and when I click TEST, I get the message that the stored procedure is not found. If I instead choose to use a SQL statement instead on the configuration screen and enter EXEC EQB.usp_SelectFunds and click TEST, it works fine.
Why are my stored procedures not showing up correctly in the stored procedure drop down and how can I fix this?
I have a page, let's called that Parameter page, displaying data from a database table using GridView. (The database is a SQL database.) I allow editing of data in GridView. The GridView uses stored procedure to retrieve data and to update data. In my project, users need to log in before using my asp.net project. So at every page, I know who the current user is by using HttpContext.Current.User.Identity.Name. Now as requirement changes, I need to record who has changed what (row) in the Parameter page. The information is to be written to a new table - audit log. Therefore I do not expect to change the Parameter table structure.
I have modified the stored procedure retrieving data. It returns one more column - an empty column with name currentUser. So GridView will create one more column. After data bound, I have the GridView_DataBound() to popluate that column using HttpContext.Current.User.Identity.Name.
I debug it in Visual Studio and am able to see the name of current log in user as the last column in GridView. I change the update stored procedure to take in one more parameter. That parameter, currentUser, takes default value. The default value is an empty string. So if UI part fails to send in the current user name to stored procedure, it just write the empty string as the user name. I change the <asp:SqlDataSource>. I add a <asp:Parameter> for currentUser.
[Code]....
I debug in Visual Studio. However when I save the change, the SQL profiler shows UI sends in @currentUser as NULL. Why?
i try to fill datatextfield and datavaluefield through sqldatasource throuh calling soterd procedure,
but i don't get any value after running the application, here my code
[code]....
I have one repeater on page which has his own sql data source. I've placed 2 dropdown lists on the page. The repeater has jQuery DataTable plugin. With 2 dropdownlist I wish to change the sql stored procedures so when each will be selected the data in repeater will change. When user select the first there will be only data (users) according to selected item and in the second the same. I wrote 2 simple functions for changing stored procedure of repeater and rebiding it. Everything works but when I try the second one and then the first I always get warning about error "Procedure or function .... has too many arguments specified".
I think that when I select the first one the second function is still called although I don't call it.
[Code]....
how to use stored procedure in asp.net for for manipulation form sql server (in details).
View 2 Repliesparameters inside the stored procedure.How to write .
View 6 Replieshere I am binding two dropdownlist and featching some value from database through stored procedure
below is my sp
ALTER PROCEDURE [dbo].[Get_OpenCostCode]
-- Add the parameters for the stored procedure here
(@UserId NVARCHAR(50)) [Code]....
and here is the .cs code
[Code]....]
but wen i run this shows error,There is already an open DataReader associated with this Command which must be closed first.
I also put in my connectionstring tag in webconfig file MultipleActiveResultSets=true;
I have a page with list box and user can select multiple values from that lst box. Now what I want to do is when user submits the page I want to generate a comma seprated string that contins the ID's of values selected and pass this string to stored procedure. String would look like something like that '2,5,9'
Now my question is how can I split these ids in my stored procedure and get the records based on these ID's. In want to pass this array to Source coloumn in the follwoing Stored procedure and get the data. Right now following stored procedure is working on the basis of single source id passed to it.
[Code]....
var a=conn.getData2();//getting the value from a global class conn.cs
OracleConnection con = conn.s();
OracleCommand oc = new OracleCommand("logedin(I need to pass the value here)", con);
logedin is strored procedure :-
create procedure logedin(user_id in int)
as
begin
update user_details set status='logedin'
where userid=user_id;
end;
i would lke to pass the value into the stored proc that was retrieved by the variable into the database.