How would you handle an INSERT that gets some values from another table using SELECT, where you wanted some values to come from the source table record and other values to come from a different parameter source like a session value? Is this possible?
View 3 Replies
I have a select statement and want to be able to insert some spaces in the returned data:
[Code]....
For the parts with ' - ', I want to remove the dash and simply put spaces now. But when I remove the dash and put 4 spaces, I only get one space. How do I put in those 4 spaces?
I have a project that I was using Access for but now find I have to change to SQL Express. Well I have no big problem with that but I now find that the SQL Statement I have been using was for OLE and does not work in SQL/Express. I am not even sure anymore if I can dump the entire CSV file in at one time? The statement I was using is below.
[Code]....
Here is my problem. What is the INSERT statement to insert a complete flat (CSV) into SQL Express? OR what method can I use to preform this task?
If I run the following SQL script:
[Code]....
I want the select statement for the above scenario.
View 2 RepliesI need to execute the stored proc accross the parameters resulted from select statement
I have created one stored procedure which require one parameters ( username ) ..
i need to execute this SP accross the Select Statement which lists all the username
somethibng like :
Set @username = (Select usename from my table)
EXEC dbo.Duplicate_Data @username
[Code]....
Select statement across three tables
I need to create a SELECT statement for a table that excluded the TOP 10 records.
"SELECT TOP 10 field1,field2,field3 FROM AppData ORDER BY field1 DESC" returns the first 10 records from the table but I need to retrieve only from the 21st record onwards.
I simply don't know how to do it because I'm not that strong with SQL. I searched the forum for some answers but can't find a solution that I can understand.
I have SQL Details View insert statement, I need to have a Condition checked for the Insert Query. The condition is, I do have a table by name table1 with the No of Questions (for Eg: 10). The insert statement shud insert data to the table2 (Another table) only if the no of rows is less than or equal to 10 else it shud give me a message (It has exceeded the no of questions).
View 3 RepliesI am trying to do an insert statement to a table from classic ASP.I tried the below:
[Code]....
But, I am getting the error as: Incorrect syntax near the keyword 'where'.How to insert data, using a where clause in the above scenario?
i'm developing windows application one of its forms supposed to fill a table called rooms with data throughout a collection of text boxes and comboboxes controls, i'm successfuly bound each control to the binding source and make sure that each data adapter contains the required data but when i start to excute the insert statement
insert into rooms([room_id],[floor],[price],[currency_id],[rec_id],[s/d],[s/ns],[room_direction],status)
values( '"+Int64.Parse(textBox1.Text) +
"' ,'" +
Int64.Parse(textBox2.Text) +
"', '" +
Int64.Parse(textBox3.Text) +
"','" + comboBox1.SelectedIndex +
"','" + comboBox2.SelectedIndex +
"','" + comboBox3.SelectedIndex +
"','" + comboBox4.SelectedIndex +
"','" + textBox4.Text +
"','" + comboBox5.SelectedIndex +
"')
it displays an error message when i'm trying to select a value from the combobox for any parameter that is"column currenc_id is constrained to be unique value 2 is already exists"can any body help me it is very important
i get this data from history table for a paricular ConsignmentNo.
................
i want the sql statement. 1st condition is sql statement should be order by CurrentStatusDate.
.......................
I have a table "Table1" which has mani 3 fields ID: int,
Date1: datetime,
Date2: datetime
All fields are filled except Date2, so I want to copy the records in Date1 to Date2I tried this query, but it didn't work
[Code]....
if I have three Dropdownlist A, B, C, how can I write a select statement to get data from sql server based on the dropdownlist selected.e.g. if user select dropdownlist A, select * from table where A = dropdownlist A but if user select dropdownlist A and C, then select statment is "select * from table where A = dropdownlist A and B = dropdownlist B or if selected A, B, C.......how can I settle so many choice.
View 2 RepliesI have a select statement in a stored procedure and want to be able to retrieve the key column value (PRODUCTID)and return it as Output when Select statement is executed on input Parameter (NAME).
addition, return two further output values (COST,TOTAL).
note the grid control expects to receive all values at once! so i need to get out these values at the same instance of execution.
Select productID,COST,QUANTITY,NAME,TOTAL,DATE
FROM PRODUCTS
WHERE NAME=@NAME
I am trying to count records belonging to a certain person in three different tables in a single select statement. The database looks like this:
Player
-PlayerId
-Name
Game
-GameId
-TournamentId
...
Goal
-GameId (FK->Game.GameId)
-PlayerId (FK->Player.PlayerId)
-Assist (FK->Player.PlayerId)
Card
-CardId
-GameId (FK->Game.GameId)
-PlayerId(FK->Player.PlayerId)
I want to select the number of goals, assist and cards a player has in a specific tournament. I tried with this query but then the goal and card column shows the sum of the number of rows matching the playerid in the Goal table and the Card table...For example if there is two matching rows in the goal table and three matching rows in the card table, I get 5 in both these columns in the resultset.
[Code]....
I am having difficulty selecting data from 2 tables that do no share a primary key value. For instance, I have an actual table, a forecast table, and a GLText table. I may have an actual value but not a forecast value but I need them to appear in the same Query (like the query results shown below). I can get all values to appear in each table but have been unsuccessful in getting all values from both tables.
View 5 RepliesI need to display the table name in the select statement. how?
exact question:
we have common columns in two tables. we are displaying the records by using
select column_name from table_name_1 union select column_name from table_name_2
But the requirement is, we need to display the source table_name along with the data. consider a,c are present in table_1 and b,d are present in table_2. we need the output in the following way
eg: column_name table_name a table_1 b table_2 c table_1 d table_2
Just quick question, is it possible to Use a Stored Procedure which has a parameter in a select statement,, I mean something like the following
SELECT A, B
FROM Something
-- Something is the name of the Stored Procedure which take date parameter
I dragged and dropped a sqldatasource and want to do an insert statement, taking the new values from a textbox. I did this already however when i do my insert statement eg. INSERT INTO Development_Programme(MHID) VALUES (@m) HOWEVER when to select the insert parameters the 'Next' button and the 'Finish' button is shaded off, I added a Select statement and the 'Next' was unshaded HOWEVER the screen to select the insert parameters is not appearing it goes straight to the Test Query.
View 3 RepliesI've got 3 tables.
Table A: UID, Name
Table B: CID, Category
Table C: ID, UID, CID
I've got a TextBox to capture the value of "Name" in Table A.
Ive got a CheckBoxList that displays all the pre-determined values of Table B.
When the user selects an item from the CheckBoxList i want to populate Table C with the value of the selected item from the CheckBoxList and the cooresponding ID associated with the user name for that person's entry.
How do I write the INSERT statement?
There is this error troubling me whenever i tried to do something to the ShopCart such as add to cart.
The INSERT statement conflicted with the FOREIGN KEY constraint "FK_ShopCart_Shopper". The conflict occurred in database "DIYERA", table "dbo.Shopper", column 'ShopperID'. The statement has been terminated.
I checked the database and the foreign key, ShopperID, was set correctly.
I have a problem with my SqlDataSource, when the web form i loaded it works OK but when I execute an insert statement and then i execute the method DataBind(), the data in my grid view is not changed.
View 1 Repliesthis is my select Statement.:-
Select (datediff(day,db_TargetDate,getdate())) from tbl_abc
in select statement only i wanted only those record in which datedifference is less than 5.
declaration of variable & then conditional checking is not wanted me because i wanted result is into select statement only & not using print statement.
[Code]....
I have a select statement that is supposed to be filling grid with information from an income table. It's only supposed to pull if the income is from the current fiscal year or is less than 1 year old. Currently, what it does is pull multiples of rows and also rows from past income years but only if there is a mixture. For instance, if a person has income from 2005 and 2010 what it will show is this
Income 2005
Income 2005
Income 2010
Income 2010
Income 2010
Does anyone know what I've done wrong? BTW, those results are exact, old income is shown twice, current is shown 3X
