Is there any option to use loop statement in MS SQL Stored Procedure?
Suppose I have two tables Table-A and Table-B
Table-A
ID
Name
Phone
1
X
12354
2
Y
3689
3
Z
2578
Table-B
ID
Name
Phone
I want to insert all the values of Table-A into Table-B by using Stored Procedure
I am using MS SQL 2005
Just quick question, is it possible to Use a Stored Procedure which has a parameter in a select statement,, I mean something like the following
SELECT A, B
FROM Something
-- Something is the name of the Stored Procedure which take date parameter
Ive been banging my head against the wall for the last 2 days with this query I am trying to produce. I have an application that creates requests and these requests have status codes dependant on how far along in the process they are : new request, awaiting approval, approved, in progress, complete When a request is moved to the next status, it Inserts a row into an auditing table, so we can track who moved it onto the next status, along with a timestamp. There are Service Level Agreements in place that mean that a request that is currently 'In Progress' must be actioned to 'Complete' within 5 days. I have been asked to create a query that will return all records that fall outside of this SLA. My main problem is trying to Select the time from the audit log for 'In Progress' and 'Complete' status codes. It would be simple if i only had to find one of the times, as i could add a "WHERE StatusCode = 'complete' clause to the query My Audit table is structured as follows:
[RequestID] [Request Status] [UserID] [CreateDate]
So far I have been successful in querying the table by using the DATEDIFF() function as below:
SELECT
DateDiff
(day,
( SELECT
top 1 CreateDate
FROM audit_tblRequest
WHERE RequestStatus
= 'In Progress'
AND RequestID
=
@RequestID Order
by CreateDate
DESC)
,(SELECT
top 1 CreateDate
FROM audit_tblRequestWHERE RequestStatus
= 90AND RequestID
=@RequestID
Order
by CreateDate
DESC)
)
This will return the difference in days to me, however, i cannot figure out how to integrate this into a query that will be run across all RequestIDs. I was wondering if there was any way to bundle the DateDiff function into a stored Procedure and be able to call it For Each RequestID in the result set I would need to pass the requestID as a parameter, and also add some If Else logic to only return records outside of the 5 Day SLA. Im sure there are some patches in the above logic, but my brain is about to explode and I needed to type it all out before calling it a day for today.
I have this stored procedure which check a collection and according to that return a result.
The problem is I want to check if a number is between 10-20 then do something
How on earth you checking something like that? I know > and < etc.. but checking if a value is a number between 10-20?
I have an sp that I would like to us the data from one column to use as a parameter for the following Select Statement
[Code]....
need to set the @customerID parameter = customer_data.CustomerID from the first Select Statement
This is surareddy. i nead some small clarification in the "Stored Procedure"
how to convert the oracle Stored Procedure to sqlserver2005/2008 Stored Procedure.
right now i am enhancing the project that project already developed the oracle Stored Procedure. now our company is using sqlserver 2005/2008.
how to convert the Oracle Stored Procedure to sqlserver 2005 Stored Procedure
Initially, I have tried to use stored procedure. But I changed my mind and preferred to call sql query in codebase with command text. However, it stills tries to find initially-called stored procedure (which is neither called or exists).I think that it is related caching. But I tried it with different browsers it did not work.What might be the reason?
View 4 Replieshow can I create stored procedure and write my select statement in it, I know how to create dataset then put type stored procedure and assign it to the sp ... what I want is writing my sp... how can I make it ?
check the following code, this is what I want to write put I don't know where or how !
CREATE STORED PROCEDURE SP_CATEGORY
@CATEGORY VARCHAR(30)
AS
BEGIN
SELECT LATIN_NAME, ENGLISH_NAME, ARABIC_NAME, CATEGORY
FROM FLORA, CATEGORY_LIST
WHERE FLORA.CATEGORY=CATEGORY_LIST.CATEGORY_NAME AND CATEGORY_LIST.CATEGORY_NAME IN (SELECT * FROM SPLITLIST(@CATEGORY, ','))
END
where can I write this code ?!
Does anybody if it is possible that a stored procedure returns rows which is the result of the execution of another sp? Something like..
[Code]....
i want to return output parameter from 1 storeprocedure. into another stored procedure.
View 7 RepliesI want to apply other stored procedure select query on result of first stored procedure.
View 1 RepliesI was trying to write an SP with for loop inside...but not sure how to start...here is the scenario...
(Select Name, Email from Table
union
need to loop throug the first select statement and need to create a row with 'Gautam' as
Name, 'looped email id's separated by commas' as Email )
and show the output ....
I am using Visual Studio 2008 and SQL Server 2008 and have added a SQL datasource to my form.
When I configure the datasource, I choose my connection string which looks like this in my webconfig:
<connectionStrings>
<add
name="PSFSPRD_ConnectionString"
connectionString="Data
The database I am using has a schema called EQB and as such, my stored procedures are named as EQB.usp_SelectFunds, EQB.usp_SelectAccount, etc.
On the select tab of the Configure Data Source screen, I choose to use a stored procedure. The dropdown shows my stored procedures, however, the schema name does not show up in front of the stored procedures in the drop down. I see only usp_SelectFunds, usp_SelectAccount, etc.
I select one of the stored procedures and when I click TEST, I get the message that the stored procedure is not found. If I instead choose to use a SQL statement instead on the configuration screen and enter EXEC EQB.usp_SelectFunds and click TEST, it works fine.
Why are my stored procedures not showing up correctly in the stored procedure drop down and how can I fix this?
I have written SP like this to get my required output.create procedure [dbo].[usp_gl_ProjectBudgets] set nocount on begin tran declare @SPError int
declare @y1 varchar(20)
declare @y2 varchar(20)
declare @y3 varchar(20)
declare @y4 varchar(20)
declare @y5 varchar(20)
declare @Glink int
declare @i int
set @y1='Year1'
set @y2='Year2'
set @y3='Year3'
set @y4='Year4'
set @y5='Year5'
set @Glink=1
set @i=1
[code]...
i have one table and structure of table is like.Now i need to fetch the Resturant Name and status of Resturant ( whether it is closed or open by comparing the opening time and closingTime with currentTime).
View 6 Repliessplit off from [URL]
how do i do this in stored procedure .. can you give me ane xample using if than else condition in stored procedure?
I would like to ask a question on the visual basic codes to loop the gridview to retrieve the values and based on the values, it will be provided as parameters to update to the database table using stored procedure.
Firstly, I have a gridview named grvProduct. The page (ui) will be loaded with data from the database with the use of stored procedures. And only certain values can be edited through the use of template in gridview. So based on those edited values, I'm supposed to pass these values as parameters to the stored procedure which will then update a database table.
Let say, I have 3 records retrieved from the database and displayed in the gridview. And I would like to edit a values in the 3 records, how do I do batch update and pass those parameters to the stored procedure? I went to debug and step through the visual basic codes and realised there were too many arguments specified because I actually loop the gridview.
Below is my visual basic codes:
[Code]....
Below is my Stored Procedure code:
[Code]....
I believe it is the error in the looping of the gridview which results that I could not batch update the data/values.
I am executing stored procedure using session.CreateSqlQueries but it is giving me exception as {"SQL queries do not currently support returning aliases"}.
I tried doing following also but it is not working for me
[code]....
I have few inline sql statements with some arrays and if loops. I want to change them all into one stored procedure in SQL server 2005.
As i am learning SQL, i have got no idea about how it should be done with arrays and if loops. Is that possible to send arrays into stored procs or is there any other solution.
[code]....
how to use stored procedure in asp.net for for manipulation form sql server (in details).
View 2 Repliesparameters inside the stored procedure.How to write .
View 6 RepliesI created a database on SQL Server 2005 developer edition with MS SQL Server Mangement Studio Express. Now I created code that accessess a stored procedure named 'pS_TableData'. However I have one problem the code raises an exception "Could not find stored procedure 'pS_TableData 'Letters''."the code looks like this:
[Code]....
Note I am using (for now) the same connection that I used to create my database so in essence my web site is the administrator. I tried a simple SELECT from a table with the same connection and it raised no exceptions!When I run EXECUTE ps_TableData 'Letters' in SSMS it has no . I also tried EXECUTE ps_TableData 'Letters' as the command paramated for SqlCommand but it had the same effect
I call this stored procedure with a dataset. It always returns a 0 but should return a 1 or 2. Does anybody know why it isn't returning a 1 or 2.
ALTER PROCEDURE dbo.sp_InsertLinkVote
@LinkId int,
@LinkVoter nvarchar(50),
@LinkVotesDateTime datetime,
@LinkVotesGoodBad bit
AS
/* SET NOCOUNT ON */
If EXISTS
(SELECT
*
FROM
LinkVotes
WHERE
LinkId=@LinkId
and
LinkVoter = @LinkVoter )RETURN
1
ELSE
INSERT INTO
dbo.LinkVotes (LinkId,LinkVoter,LinkVotesDateTime,LinkVotesGoodBad)VALUES
(@LinkId,@LinkVoter,@LinkVotesDateTime,@LinkVotesGoodBad)RETURN
2
Here is were a call it in my code behind.
Dim VoteCheck
As
Integer
Dim InsertVote
As
New DataSetStoredProceduresTableAdapters.QueriesTableAdapter
VoteCheck = InsertVote.sp_InsertLinkVote(LinkId, User.Identity.Name, DateAndTime. Now,
True)
'0 is a good vote.
If VoteCheck = 0
Then
It seems to insert and not insert correctly, I just cannot get it to return the correct value.
I am developing a page in ASP.Net where I have the user enter a letter into a textbox. They then click a submit button and I all of the userids that start with that letter are to be displayed. So I need the SP to go through the database and match first letters with what was entered. Here is what I have as my code for the SP:
CREATE PROCEDURE dbo.exp2 @testchar Char(1)
declare @flag as char(2)
set @flag = @testchar + '%'
select userid
from ex_database
where userid like @flag
So I'm working with SQL Server 2005 and I'm having trouble saving a stored procedure. (I've only used an Apache server before, and for nothing as complex as the project I'm working on)
Nonetheless, the problem is that I don't know where to actually save the stored procedure I create. In my Object Explorer, I go to the database I want to create it in, expand Programmability, right click on Stored Procedures and choose to create a new one. That's all nice, but when I'm ready to save and test it from my webpage, it asks where to save it. This is probably dumb of me, but I don't know where to. I try to save it on the desktop and click/drag to the Stored Procedures folder in my database, but all that does is open it, not actually store it in the database. Maybe I'm getting the point of stored procedures wrong? Let me know what I should do to save it in the right place so I can access it.