DataSource Controls :: StoredProc - Msg 156 - Incorrect Syntax Near Keyword "DECLARE"

May 20, 2010

I am getting these errors when compiling => Msg 156, Level 15, State 1, Line 2 Incorrect syntax near the keyword 'AS' Msg 156, Level 15, State 1, Line 6 Incorrect syntax near the keyword 'DECLARE'.

SET ANSI_NULLS
ON
SET QUOTED_IDENTIFIER
ON
GO
AS
ALTER PROCEDURE [dbo].[Z_DQA_LOAD_RECIPE]
DECLARE @instbl
varchar(50)
SET @instbl
=
'Z_DQA_'
DECLARE @instbl_def
varchar(50)
SET @instbl_def
=
'Z_DQA_'
DECLARE @updttbl
varchar(20)
DECLARE @Run
int
DECLARE @Defect
int
DECLARE @Test_Num
int
DECLARE @Test_Desc
varchar(50).............................

View 3 Replies


Similar Messages:

DataSource Controls :: Declare Attribute With Select Top 1 / Error Incorrect Syntax Near The Keyword 'select'

Apr 14, 2010

I will declarate a attribute, but it gives me an error

This query works fine and returns 1 record from type int:

SELECT TOP 1 DataObjectVersionID
FROM tblDataObjectVersionPropertyValueText
WHERE PropValue like CAST('00010281' AS ntext)
ORDER BY DataObjectVersionID DESC

And when I will declarate a attribute/parameter it gives me an error:

DECLARE @dataObjectVersionId INT
SET @dataObjectVersionId = SELECT TOP 1 DataObjectVersionID
FROM tblDataObjectVersionPropertyValueText
WHERE PropValue like CAST('00010281' AS ntext)
ORDER BY DataObjectVersionID DESC

Error message:

Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'SELECT'.

View 4 Replies

DataSource Controls :: Shopping Cart Error: Incorrect Syntax Near The Keyword

Apr 20, 2010

i am making a shopping cart and i am receiving this error when tryin to add a product to an order. Incorrect syntax near the keyword 'Order'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'Order'. Source Error:

[Code]....

Source File: c:UsersPerk-OnDocumentsVisual Studio 2008WebSitesestApp_CodeCart.cs Line: 69 Stack
Trace:

[Code]....

Here is my createorder method in the cart class:

[Code]....

public string CreateOrder (string userid)

View 9 Replies

DataSource Controls :: Incorrect Syntax Near The Keyword "order"

Jul 9, 2010

I wrote a select statement such as:

[Code]....

View 4 Replies

DataSource Controls :: Incorrect Syntax Near The Keyword "FROM" Error

Apr 10, 2010

I have a GridView on my web site where column "Tariff Description" I have configured as DropDownList where two values are included. When user updates client details, I want him to be able to assign Tariff from those two values. When I click Edit on user details, change one tariff value to another and click Update, I get "Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'FROM'." error message. Following is a code I use:

[Code]....

View 6 Replies

DataSource Controls :: Incorrect Syntax Near The Keyword "AS" - When Try To SELECT Details Of Job And Region

Jul 4, 2010

I am trying to use this code:

[Code]....

And i get this error:

Incorrect syntax near the keyword 'AS'. What i am trying to do is SELECT details of a job and also SELECT which region the job is in. I currently have this: [URL] But i need to change it so it shows the Job name, details and then the regions..

View 7 Replies

DataSource Controls :: Incorrect Syntax Near The Keyword "and"

May 13, 2010

this is my code for binding a gridview on based of two dropdownlists selected choices.

protected void Bind_NBD()
{
SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["contest"].ConnectionString);
con.Open();
StringBuilder sub = new StringBuilder("select * from mtblNBD where (1=1)
order by Deadline desc");
SqlCommand com = new SqlCommand(sub.ToString(), con);
if (ddlDivision.SelectedValue != "0")
{
sub.Append(" and Division = @Division");
com.CommandText = sub.ToString();
com.Parameters.AddWithValue("@Division", ddlDivision.SelectedItem.Text);
;
}
if (ddlGroup.SelectedValue != "0")
{
sub.Append(" and GroupIn=@GroupIn");
com.CommandText = sub.ToString();
com.Parameters.AddWithValue("@GroupIn", ddlGroup.SelectedItem.Text);
}
SqlDataAdapter da = new SqlDataAdapter(com);
DataTable dt = new DataTable();
da.Fill(dt);
if (dt.Rows.Count > 0)
{
GridView1.DataSource = dt;

if in this query StringBuilder sub = new StringBuilder("select * from mtblNBD where (1=1) order by Deadline desc"); I remove the bolded part "order by Deadline desc" then it works good. but with this part the result is with an error. Incorrect syntax near the keyword 'and'. what causes the error.

View 20 Replies

DataSource Controls :: Incorrect Syntax Near The Keyword "IN"

Jul 1, 2010

I get this error: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'IN'. this is my code:

[Code]....

View 8 Replies

DataSource Controls :: Incorrect Syntax Near The Keyword "where"

Oct 13, 2010

When I use the sqldatasource select paremeters like that:

<asp:SqlDataSource ID="dtsrcHotAreaLabor" runat="server"
ConnectionString="<%&#36; ConnectionStrings:ContentMiningConnectionString %>"
SelectCommand="SELECT * FROM [HotAreaLabors] ORDER BY [Date] where [UserAlias]=@UserAlias"
UpdateCommand="UPDATE [HotAreaLabors] set [Date]=@Date,[LaborType]=@LaborType,[Comments]=@Comments where [lid]=@lid and [UserAlias]=@UserAlias"
DeleteCommand="DELETE FROM [HotAreaLabors] WHERE [lid]=@lid and [UserAlias]=@UserAlias"
onselecting="dtsrcHotAreaLabor_Selecting">
<SelectParameters>
<asp:Parameter Type="String" Name="UserAlias"/>
</SelectParameters>
<UpdateParameters>
<asp:Parameter ConvertEmptyStringToNull="true" Type="String" Name="UserAlias" />
<asp:Parameter ConvertEmptyStringToNull="true" Type="String" Name="Date" />
<asp:Parameter ConvertEmptyStringToNull="true" Type="String" Name="LaborType" />
<asp:Parameter ConvertEmptyStringToNull="true" Type="String" Name="Comments" />
<asp:Parameter ConvertEmptyStringToNull="true" Type="String" Name="lid" />
</UpdateParameters>
<DeleteParameters>
<asp:Parameter ConvertEmptyStringToNull="true" Type="String" Name="lid" />
<asp:Parameter ConvertEmptyStringToNull="true" Type="String" Name="UserAlias"/>
</DeleteParameters>
</asp:SqlDataSource>

And

protected void dtsrcHotAreaLabor_Selecting(object sender, SqlDataSourceSelectingEventArgs e)
{
e.Command.Parameters["@UserAlias"].Value = Profile.UserName;
}

When I run this page, I got the error "Incorrect syntax near the keyword 'where'."

View 1 Replies

SQL Server :: Incorrect Syntax Near The Keyword 'else'?

Mar 26, 2011

I am unable to find out what's wrong in this stored procedure...it says Incorrect syntax near the keyword 'else'.

07/09/2010 WEGMANS #098 Q02 STATE COLLEGE PA
$5.96

07/12/2010 WAL-MART #1640 QPS STATE COLLEG PA
$21.07

You are sharing a picture (58.7 KB) with 2venkatesh

cutie.jpg 2venkatesh declined the offer 2venkatesh is busy. You are sharing a picture (107.4 KB) with 2venkatesh

151377447_1d4ec57c68.jpg 2venkatesh declined the offer.You are sharing a picture (58.7 KB) with 2venkatesh

cutie.jpg 2venkatesh declined the offer

2venkatesh who are you buddy in my gtalk? who are the people in those pics?

12860701286070128607012860701286070128607012860701286070128607012860701286070[code]...

View 2 Replies

Web Forms :: Incorrect Syntax Near Keyword Between

Mar 26, 2012

When I use single text box for date it work fine but when a'm check between two dates it gives error this is my code

Dim adp As New SqlDataAdapter("select EmplID='" + TextBox1.SelectedValue + "', date between ='" &
TextBox2.Text & "' and '" & TextBox3.Text & "' ,RESULT = CASE WHEN exists(select * from AtdRecord where RecDate between ='" & TextBox2.Text & "' and '" & TextBox3.Text & "'  and EmplID='" + TextBox1.SelectedValue + "')
THEN ('P')ELSE ('A ' ) END,ResultType= CASE WHEN exists (select * from AtdRecLeave where StDate between = '" + TextBox2.Text & "'and '" & TextBox3.Text & "' and EmplID='" + TextBox1.SelectedValue + "')
THEN (SELECT ResultType FROM AtdRecLeave WHERE EmplID='" + TextBox1.SelectedValue + "'
and stDate between = '" + TextBox2.Text & "' and '" & TextBox3.Text & "') else ('-') END", con)eror=

Incorrect syntax near the keyword 'between'.Incorrect syntax near '='.Incorrect syntax near '='.Incorrect syntax near '='.

View 1 Replies

C# - Why Get An "Incorrect Syntax Near The Keyword INNER'' Error

Mar 11, 2011

In SQL Query Analyzer I run this statement and I don't get anny error:

string select = "SELECT " +
"aanvrager.werknemersnaam AS melder , hd_aanvragen.aanvraag_titel, " +
"hd_aanvragen.aanvraag_omschrijving, hd_aanvraag_fase.fase_datum, " +
"hd_melding_niveau_1.niveau_omschrijving AS 'Niveau 1', " +
"hd_melding_niveau_2.niveau_omschrijving AS 'Niveau 2', " +
"hd_aanvragen.outlook_id" +
"FROM hd_aanvragen " +
"INNER JOIN hd_meldingen ON hd_meldingen.melding_id = hd_aanvragen.melding_id " +
"INNER JOIN hd_melding_niveau_1 ON hd_melding_niveau_1.niveau1_id = hd_meldingen.niveau1_id " +
"INNER JOIN hd_melding_niveau_2 ON hd_melding_niveau_2.niveau2_id = hd_meldingen.niveau2_id " +
"INNER JOIN hd_aanvraag_fase ON hd_aanvraag_fase.aanvraag_id = hd_aanvragen.aanvraag_id " +
"INNER JOIN hd_statussen ON hd_statussen.status_id = hd_aanvraag_fase.status_id " +
"INNER JOIN hd_werknemers AS oplosser ON oplosser.werknemer_Id = hd_aanvraag_fase.werknemer_Id " +
"INNER JOIN hd_werknemers AS aanvrager ON aanvrager.werknemer_Id = hd_aanvragen.werknemer_Id " +
"WHERE hd_statussen.status_id = 16";

But if I run this select-statement here: MyDataSource.SelectCommand = select; I get this error: Incorrect syntax near the keyword 'INNER'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'INNER'.

View 4 Replies

SQL Server :: Incorrect Syntax Near The Keyword 'distinct'

Dec 8, 2010

I have the data below:

id locationid cookieid username IPAddress createdate
1 704 192.168.0.103 2010-12-08 18:11:24.423
2 704 192.168.0.103 2010-12-08 18:13:26.133
3 704 myname@hotmail.com 192.168.0.103 2010-12-08 18:13:47.710
4 704 myname@hotmail.com 192.168.0.103 2010-12-08 18:16:42.730
5 704 myname@hotmail.com 192.168.0.103 2010-12-08 18:17:00.433
6 704 myname@hotmail.com 192.168.0.103 2010-12-08 18:18:09.867
7 1504 myname@hotmail.com 192.168.0.103 2010-12-08 18:26:01.447

Now, I want to select all unique locationid's from a single username, its important that the results can be PAGED and SORTED, I now have:

SELECT * FROM (select ROW_NUMBER() OVER (ORDER BY createdate) as RowNum,
distinct(locationid), l.*
FROM location_views lv
INNER JOIN locations l on l.id=lv.locationid
where lv.username='myname@hotmail.com'
) as info
WHERE RowNum > 0 AND RowNum <= 100

But this throws the error: "Incorrect syntax near the keyword 'distinct'."

View 2 Replies

System.Data.SqlClient.SqlException: Incorrect Syntax Near The Keyword "FROM"

Jan 21, 2011

i am trying to create an insertion form in ASP.net.but i get this exception and i could not find this with google.

<div id = "survey_div">
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:surveyConnectionString1 %>"
DeleteCommand="DELETE FROM survey"
InsertCommand="INSERT INTO survey(age, country, city) VALUES (,,)"
SelectCommand="SELECT FROM survey" UpdateCommand="UPDATE survey SET">
</asp:SqlDataSource>
<asp:DetailsView ID="DetailsView1" runat="server" CellPadding="4"
DataSourceID="SqlDataSource1" EnableModelValidation="True" ForeColor="#333333"
GridLines="None" Height="50px" Width="125px">
<AlternatingRowStyle BackColor="White" />
<CommandRowStyle BackColor="#D1DDF1" Font-Bold="True" />
<EditRowStyle BackColor="#2461BF" />
<FieldHeaderStyle BackColor="#DEE8F5" Font-Bold="True" />
<Fields>
<asp:CommandField ShowInsertButton="True" />
</Fields>
<FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
<RowStyle BackColor="#EFF3FB" />
</asp:DetailsView>
</div>

View 2 Replies

SQL Server :: Incorrect Syntax Near The Keyword "union" Error

Feb 16, 2011

my statment is: SELECT TOP (20) PERCENT GroupName from [Group] ORDER BY NewID() union SELECT TOP (10) PERCENT GroupName from [Group] i get this error

View 1 Replies

SQL Server :: Incorrect Syntax Near The Keyword "with" - If Statement Is A Common Table Expression

Jan 19, 2011

i am writing storedprocedure for creating salary table ,but getting error while executing sp.

USE [Crystal.HRM]
GO
/****** Object: StoredProcedure [dbo].[Hrm_Salary] Script Date: 01/19/2011 13:11:02 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO

CREATE PROCEDURE [dbo].[Hrm_Salary](
@Pay_Basic char(1),
@Pay_Hra char(1)
)
AS
BEGIN
declare @fields nvarchar(max)
set @fields='Hrm_Emp_Id [int] not null'
if(@Pay_Basic='Y')
Begin
set @fields=@fields+', Pay_Basic [int] NOT NULL CONSTRAINT [DF_Hrm_Emp_Salary_Pay_Basic] DEFAULT ((0)),'
end
if(@Pay_Hra='Y')
Begin
set @fields=@fields+', Pay_Hra [smallint] NOT NULL CONSTRAINT [DF_Hrm_Emp_Salary_Pay_Hra] DEFAULT ((0)),'
End
set @fields=substring(@fields,0,len(@fields)-2)
declare @sql nvarchar(max)
set @sql='CREATE TABLE [dbo].[Salary]('+
@fields+'
CONSTRAINT [PK_Payroll] PRIMARY KEY CLUSTERED
(
[Pay_Emp_Id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
USE [Crystal.HRM]
GO
ALTER TABLE [dbo].[Hrm_Emp_Salary] WITH CHECK ADD CONSTRAINT [FK_Hrm_Emp_Salary_Hrm_Emp_Tbl] FOREIGN KEY([Pay_Emp_Id])
REFERENCES [dbo].[Hrm_Emp_Tbl] ([Emp_Id])'
exec sp_ExecuteSql @sql
END

View 3 Replies

SQL Server :: Incorrect Syntax Near The Keyword "FETCH"

Feb 14, 2011

i am getting error 'Incorrect syntax near the keyword 'FETCH'. ' while creating trigger.pls give solution for this error

SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TRIGGER Hrm_Emp_Leave_Insert_Data
ON Hrm_Leave_Lookup
AFTER INSERT
AS
BEGIN
DECLARE @EMP_ID int
DECLARE @LEAVE_ID int
DECLARE @LEAVE_TOTAL tinyint
DECLARE @LEAVE_CARRY_DAYS tinyint
select @LEAVE_ID=Leave_Id, @LEAVE_TOTAL=Leave_Total, @LEAVE_CARRY_DAYS=Leave_Carry_Days from inserted
DECLARE SelectCursor CURSOR
FOR select Emp_Id from Hrm_Emp_Tbl where Emp_Status='A'
OPEN SelectCursor
FETCH NEXT from SelectCursor into @EMP_ID
while @@FETCH_STATUS=0
BEGIN
insert into hrm_emp_leave (@EMP_ID, @LEAVE_ID, @LEAVE_TOTAL, @LEAVE_CARRY_DAYS)
FETCH NEXT from SelectCursor into @EMP_ID
END
CLOSE SelectCursor
DEALLOCATE SelectCursor
END

View 2 Replies

SQL Server :: Incorrect Syntax Near The Keyword "ON"

Dec 14, 2010

i have 3 tables to inner join to get the values. employee_id, employee_name from employee table emplyee_assessment, manager_assessment from Appraisal table. status from objective table

set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[sp_selectemployeeapprisaldetails]
@employee_name Varchar(30) =null,
@years Varchar(30) =null,
@designation Varchar(30) =null,
@status Varchar(30) =null
AS
BEGIN

--Set NULL when variable is NULL or length is zero
if @employee_name is not null and len(@employee_name)=0 set @employee_name = null
if @years is not null and len(@years)=0 set @years = null
if @designation is not null and len(@designation)=0 set @designation = null
If @status = 'Select' Set @status = null
select employee.employee_id, employee.employee_name, Appraisal.years, Appraisal.emplyee_assessment, Appraisal.manager_assessment, objective.status
from employee INNER JOIN ON (objective INNER JOIN ON Appraisal ON objective.objective_id = Appraisal.objective_id) ON employee.employeeid = Apprasial.employee_id
WHERE employee.emplyee_id = Appraisal.employee_id and Appraisal.objective_id = objective.objective_id and objective.status = 'Active'
END

but i am getting errors like 1) Incorrect syntax near the keyword 'ON'.

View 2 Replies

SQL Server :: EXEC 17P_Comose Will Give Incorrect Syntax Error - Incorrect Syntax Near '17'

Sep 15, 2010

I am working with a sql server database with about 50 stored procedures. The database and stored procedureswere not created by me. The stored procedures all begin with a number in their name.

Example: 17P_Comsetter

The problem I am having is that if I try and execute the stored procedure at the command line in Query Analyzer,the query analyzer appears not to like that the stored procedure begins with a number. For example:

If I try an run the stored procedure as follows:

EXEC 17P_Comsetter

Then I get the following error message:

Msg 102, ..... Incorrect Syntax near '17'

I am using SQL server 2005. Does anyone know why I am getting this error message?

View 1 Replies

DataSource Controls :: Getting Incorrect Syntax Error

Apr 27, 2010

[Code]....

Stack Trace:

[Code]....

[code]....

getting Incorrect syntax near error

View 2 Replies

DataSource Controls :: Incorrect Syntax Near Key Word Inner...

May 24, 2010

I hv Writte nA sql Query in whic hi want to use an Inner join as well as THe left OUter Join in it ..i hv written it in the sql server it executes properly.but when i run the same code ..from my application .it starts gving the Error Incorrect Syntax Near Keyword INNER..

[code]....

View 9 Replies

DataSource Controls :: Incorrect Syntax Near '>' Getting Error

Sep 6, 2010

I am getting a strange error message;

Incorrect syntax near '>'.
I made a listview with some dropdownmenu and selectboxes to select from untill the query shows in the listview.

Now the query goes well and shows the first page of 4 rows as I wanted it.

The pager shows 5 pages and if I a want to click on the next page I get this message.

Incorrect syntax near '>'.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near '>'.

Source Error:

[Code]....

Stack Trace:

[Code]....

[SqlException (0x80131904): Incorrect syntax near '>'.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +2030802 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +5009584 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning() +234 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2275 System.Data.SqlClient.SqlDataReader.ConsumeMetaData() +33 System.Data.SqlClient.SqlDataReader.get_MetaData() +86 System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +311 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +987 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +162 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) +32 System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) +141 System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior) +12 System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) +10 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +144 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +319 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +92 System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1618 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +21 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +143 System.Web.UI.WebControls.ListView.PerformSelect() +113 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +74 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +66 System.Web.UI.WebControls.BaseDataBoundControl.OnPreRender(EventArgs e) +22 System.Web.UI.Control.PreRenderRecursiveInternal() +103 System.Web.UI.Control.PreRenderRecursiveInternal() +175 System.Web.UI.Control.PreRenderRecursiveInternal() +175 System.Web.UI.Control.PreRenderRecursiveInternal() +175 System.Web.UI.Control.PreRenderRecursiveInternal() +175 System.Web.UI.Control.PreRenderRecursiveInternal() +175 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2496

Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

<asp:SqlDataSource ID="SqlDataSource4" runat="server"
ConnectionString="<%$ ConnectionStrings:AvcilarEvleri %>"
SelectCommand="SELECT * FROM Tabel1 WHERE ((([Regio_Object] = @Regio_Object) AND ([Plaats_Object] = @Plaats_Object) AND ([Wijk_Object] = @Wijk_Object) AND (Prijsklasse => @Prijsklasse1) AND (Prijsklasse <= @Prijsklasse2)
AND (Prijsklasse =&gt @Prijsklasse3) AND (Prijsklasse <= @Prijsklasse4 AND (Oppervlakte_Object =&gt @Oppervlakte_Object1) AND (Oppervlakte_Object <= @Oppervlakte_Object2)) AND ((Type_Object = @Type_Object1) OR (Type_Object = @Type_Object2) OR
(Type_Object = @Type_Object3)))">
<SelectParameters>
<asp:ControlParameter ControlID="DropSehir1" Name="Regio_Object"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropIl1" Name="Plaats_Object"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropDownList5" Name="Wijk_Object"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropFiyat1" Name="Prijsklasse1"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropFiyat2" Name="Prijsklasse2"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropFiyat3" Name="Prijsklasse3"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropFiyat4" Name="Prijsklasse4"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropMetre1" Name="Oppervlakte_Object1"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropMetre2" Name="Oppervlakte_Object2"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="CheckBoxList1" Name="Type_Object1"
PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="CheckBoxList1" Name="Type_Object2"
PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="CheckBoxList1" Name="Type_Object3"
PropertyName="SelectedValue" />
</SelectParameters>
</asp:SqlDataSource>

And the code;

Sub Button1_Click(ByVal sender As Object, ByVal e As EventArgs) Handles Button1.Click

Panel1.Visible = False
Panel4.Visible = False
Panel5.Visible = False
Panel6.Visible = False
Panel7.Visible = False
Panel8.Visible = False
Panel9.Visible = False
Panel10.Visible = False
Panel2.Visible = True
Panel3.Visible = True
Dim strchklist As String = ""
Dim li As ListItem
For Each li In CheckBoxList1.Items
If li.Selected Then
strchklist += ",'" & li.Value & "'"
End If
Next
If strchklist = "" Then
Response.Write("No item Selected")
End If
SqlDataSource4.SelectCommand = "SELECT * FROM Tabel1 WHERE ([Regio_Object] = @Regio_Object) AND (Plaats_Object = @Plaats_Object) AND (Wijk_Object = @Wijk_Object) AND (Prijsklasse >= @Prijsklasse3) AND (Prijsklasse <= @Prijsklasse4) AND (Oppervlakte_Object
>= @Oppervlakte_Object1) AND (Oppervlakte_Object <= @Oppervlakte_Object2) AND Kamers_Object IN (" & strchklist.Substring(1) & ")"
SqlDataSource4.DataBind()
End Sub

I am sure it has something to do with the query because and with the checkboxes.

View 7 Replies

DataSource Controls :: Delete Command - Incorrect Syntax

Feb 16, 2010

see this code.

[Code]....

"Tbl_Name" is a varaible contain tables name for delete records on an table(at a time Tbl_Name change table name by drop down list)

problem: in SCommand.ExecuteNonQuery() error appear:incorrect syntax near Tbl_Name (i use ado.net connection)

View 2 Replies

DataSource Controls :: Error Message: Incorrect Syntax Near ','

Jun 23, 2010

Can someone please tell me what normally causes this error message (stack trace at bottom of this post)? I can't even tell what line or what page is producing the error.

Following are the relevant (I think) 2 code procedures...the Update command below seems to "work", because later I see that the image is updated---but I can't immediately see that: I get the above error message.

'FormView.ItemUpdating Event
Protected Sub AdvertisementForm_ItemUpdating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.FormViewUpdateEventArgs) Handles AdvertisementForm.ItemUpdating
' Get the connection string from Web.config.
Using conn As New SqlConnection(ConfigurationManager.ConnectionStrings("MyDatabaseConnectionString").ToString())
' Create a command object.
Dim cmd As New SqlCommand()
' Assign the connection to the command.
cmd.Connection = conn
' Set the command text
' SQL statement or the name of the stored procedure.
cmd.CommandText = "UPDATE Advertisements SET UserName = @UserName, Age = @Age, Avatar = ISNULL(@Avatar, Avatar) WHERE UserId = @UserId"
' Set the command type
' CommandType.Text for ordinary SQL statements;
cmd.CommandType = CommandType.Text
' Get the person ID, first name and last name from the
' EditItemTemplate of the FormView control.
Dim strUserId As String = DirectCast(AdvertisementForm.Row.FindControl("UserIdTextBox"), TextBox).Text
Dim strUserName As String = DirectCast(AdvertisementForm.Row.FindControl("UserNameTextBox"), TextBox).Text
Dim strAge As String = DirectCast(AdvertisementForm.Row.FindControl("AgeTextBox"), TextBox).Text
' Append the parameters to the SqlCommand and set values.
cmd.Parameters.Add("@UserId", SqlDbType.UniqueIdentifier).Value = Guid.Parse(strUserId)
cmd.Parameters.Add("@UserName", SqlDbType.NChar).Value = strUserName
cmd.Parameters.Add("@Age", SqlDbType.NChar).Value = strAge
' Find the FileUpload control in the EditItemTemplate of
' the FormView control.
Dim uploadAvatar As FileUpload = DirectCast(AdvertisementForm.FindControl("uploadAvatar"), FileUpload)
If uploadAvatar.HasFile Then
' Append the Picture parameter to the SqlCommand.
' If a picture is specified, set the parameter with
' the value of bytes in the specified picture file.
cmd.Parameters.Add("@Avatar", SqlDbType.VarBinary).Value = uploadAvatar.FileBytes
Else
' Append the Picture parameter to the SqlCommand.
' If no picture is specified, set the parameter's
' value to NULL.
cmd.Parameters.Add("@Avatar", SqlDbType.VarBinary).Value = DBNull.Value
End If
' Open the connection.
conn.Open()
' Execute the command.
cmd.ExecuteNonQuery()
End Using
' Switch FormView control to the ReadOnly display mode.
AdvertisementForm.ChangeMode(FormViewMode.ReadOnly)
' Rebind the FormView control to show data after updating.
BindFormView()
End Sub
Private Sub BindFormView()
' Get the connection string from Web.config.
Using conn As New SqlConnection(ConfigurationManager.ConnectionStrings("MyDatabaseConnectionString").ToString())
' Create a DataSet object.
Dim dsPerson As New DataSet().
' Create a SELECT query.
Dim strSelectCmd As String = "SELECT UserId, Avatar FROM Advertisements"
' Create a SqlDataAdapter object
Dim da As New SqlDataAdapter(strSelectCmd, conn)
' Open the connection
conn.Open()
' Fill the DataTable named "Advertisements" in DataSet with the rows
' returned by the query.
da.Fill(dsAdvertisements, "Advertisements")
Dim dsAdvertisements As DataSet = New DataSet()
' Bind the FormView control.
AdvertisementForm.DataBind()
End Using
End Sub
Server Error in '/www.mywebsite.com' Application.
Incorrect syntax near ','.
[Code]....
Stack Trace: [Code]....

View 4 Replies

DataSource Controls :: Update Query Error - Incorrect Syntax Near 'nvarchar'.?

May 3, 2010

I have this SqlDataSource:

[Code]....But when I click Button Update this error occurred:

Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near 'nvarchar'.

View 5 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved