Databases :: Mysql Odbc Database - Syntax / Connection Not Close Errors

Aug 18, 2010

[Code]....

I can check whether username exists or not successfully but not for email. any ideas why it isn't working? Error message was that i did not close my connection. using System;

View 1 Replies


Similar Messages:

Databases :: Connection MySQL - Using ODBC Datasource - "syntax Error Near Page 1 At Select * From [categories]"

Jun 1, 2010

I have installed MySQL and set up an ODBC driver to point to a database in MySQL. In ASP.NET I have defined a connection string to attach to this MySQL dtabase.

<asp:SqlDataSource
ID="SqlDataSource2"
runat="server"
ConnectionString="<%&#36;
ConnectionStrings:MySQLConnectionString %>"
SelectCommand="SELECT
* FROM [categories]"
ProviderName="<%&#36;
ConnectionStrings:MySQLConnectionString.ProviderName %>">
</asp:SqlDataSource>

However in ASP.NET connection wizard, although the tables are shown, no colums are shown and when I attempt to run the page which uses this datasource I get an error message about a syntax error near page 1 at 'Select * from [categories]'. how to use an ODBC (MySQL) datasource in ASP.NET?

View 7 Replies

Databases :: Using Parameters In TableAdapter - ODBC Connection To MySql

Feb 15, 2011

I am currently making a website on asp.net and i am creating methods using TableAdapter. I am connected to MySql using an ODBC connection. The select * from department will work perfectly for me but when trying to use parameters i am given an error message on the wizard. select * from department where name = @name gives me the error: Error in where clause near '@' unable to parse query text. also tried select * from department where name = ?: this gives me the error: No mapping exists from dbTypeObject to a known Odbc type.

View 3 Replies

Databases :: Does Command Parameter Work While Using Mysql As A ODBC Connection

Jun 6, 2010

I have a problem whenever i run my code i get the following error ERROR [42000] [MySQL][ODBC 3.51 Driver][mysqld-5.1.46-community]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ' ('b'), ('Manager'), ('c'), ('d'), ('e')' at line 1 my code works with connector/net but my host does not have it installed so i've had to change my code to odbc which they do have, i have found out the syntax is different and changed my code accordingly my code is as follows

[Code]....

View 2 Replies

Error "[42000] [MySQL][ODBC 3.51 Driver][mysqld-5.1.51-community]" In C# Code (mysql Database Connection)

Dec 21, 2010

My code is to update a record if it already exists in database else insert as a new record. My code is as follows:

protected void Button3_Click(object sender, EventArgs e)
{
OdbcConnection MyConnection = new OdbcConnection("Driver={MySQL ODBC 3.51 Driver};Server=localhost;Database=testcase;User=root;Password=root;Option=3;");
MyConnection.Open();
String MyString = "select fil_no,orderdate from temp_save where fil_no=? and orderdate=?";
OdbcCommand MyCmd = new OdbcCommand(MyString, MyConnection);
MyCmd.Parameters.AddWithValue("", HiddenField4.Value);
MyCmd.Parameters.AddWithValue("", TextBox3.Text);
using (OdbcDataReader MyReader4 = MyCmd.ExecuteReader())
{
//**
if (MyReader4.Read())
{
String MyString1 = "UPDATE temp_save SET order=? where fil_no=? AND orderdate=?";
OdbcCommand MyCmd1 = new OdbcCommand(MyString1, MyConnection);
MyCmd1.Parameters.AddWithValue("", Editor1.Content.ToString());
MyCmd1.Parameters.AddWithValue("", HiddenField1.Value);
MyCmd1.Parameters.AddWithValue("", TextBox3.Text);
MyCmd1.ExecuteNonQuery();
}
else
{
// set the SQL string
String strSQL = "INSERT INTO temp_save (fil_no,order,orderdate) " +
"VALUES (?,?,?)";
// Create the Command and set its properties
OdbcCommand objCmd = new OdbcCommand(strSQL, MyConnection);
objCmd.Parameters.AddWithValue("", HiddenField4.Value);
objCmd.Parameters.AddWithValue("", Editor1.Content.ToString());
objCmd.Parameters.AddWithValue("", TextBox3.Text);
// execute the command
objCmd.ExecuteNonQuery();
}
}
}

I am getting the error as: ERROR [42000] [MySQL][ODBC 3.51 Driver][mysqld-5.1.51-community]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'order,orderdate) VALUES ('04050040272009',' &' at line 1

The datatype for fields in table temp_save are:

fil_no-->INT(15)( to store a 15 digit number)
order-->LONGTEXT(to store contents from HTMLEditor(ajax control))
orderdate-->DATE(to store date)

View 2 Replies

Databases :: Connection To MySQL Database

May 15, 2010

I did all the instructions which are in the following link: [URL] in order to do a connection between MySQL database and ASP.NET but I did not successed. Sometimes, it told me that I have a mistake in the <asp: button> and sometimes it told me that I did a mistake in calling (addImage) method. And this is my whole code:-

&#65279;<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="HW5._Default" %>
<script>
public class DataAccess
{
private string _strConn =
@"Driver= {MySQLODBC 3.51 Driver};SERVER=localhost;DATABASE=test1;";
private OdbcConnection _objConn;
public DataAccess()
{
this._objConn = new OdbcConnection(this._strConn);
}
// This function adds the Images to database
public string addImage(timestamp id, byte [] data,string extension)
{
string strSql = "SELECT * FROM File";
DataSet ds = new DataSet("Image");
OdbcDataAdapter tempAP = new OdbcDataAdapter(strSql,this._objConn);
OdbcCommandBuilder objCommand = new OdbcCommandBuilder(tempAP);
tempAP.Fill(ds,"Table");
try
{
this._objConn.Open();
DataRow objNewRow = ds.Tables["Table"].NewRow();
objNewRow["Extension"] = extension;
objNewRow["Data"] = buffer;
objNewRow["ID"] = id;
ds.Tables["Table"].Rows.Add(objNewRow);
// trying to update the table to add the image
tempAP.Update(ds,"Table");
}.....................................

View 4 Replies

ODBC.Net Connection To MySQL DB

Oct 1, 2010

I'm thinking the problem here is with my SQL Syntax, but I'm not sure and need a fresh pair of eyes to check it out. This is the code I'm using to connect to and then insert into the DB:

OdbcConnection datConn = CreateDataConn();
datConn.Open();
OdbcCommand comm = new OdbcCommand();
comm.CommandText = "INSERT INTO userdata (key, secretkey, uid) VALUES ('" + token + "', '" + secret + "', '" + twitterid + "');";
comm.Connection = datConn;
comm.ExecuteNonQuery();
datConn.Close();

And here is the CreatDataConn() method:

private OdbcConnection CreateDataConn()
{
OdbcConnection dbConn = new OdbcConnection();
dbConn.ConnectionString = "Dsn=MySQL;database=twittertest;option=0;port=0;server=localhost;uid=root;pass=Red!4jedi";
return dbConn;
}

I created a DSN to the database, which is hosted on my machine. When I run the application I get this error:

ERROR [42000] [MySQL][ODBC 3.51 Driver][mysqld-5.1.51-community]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'key, secretkey, uid) VALUES ('127090765-i3aZl71LPSVUCPZs9kHSYeBli0vWpbq0BaM1roYC' at line 1

But for the life of me I can't figure out what's wrong with my syntax...It's prolly something simple, but again, I need a pair of fresh eyes to look at this.

View 1 Replies

Databases :: Read Image From MySQL With ODBC?

Sep 29, 2010

I have a problem that I can't figure out. I shall read an images from a column in a MySQL database. I use a simple aspx page and the codebehind file with the code below.

It is ok to read the image if I don't use any parameter value in the where clause, but if I use it, nothing is returned. I don't know if I have done anything wrong in the code. I have also tried to set a proper value on the parameter.value without success. So my conclusion is that the parameter sertup is wrong in my code.

Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim PictureID As Integer = Convert.ToInt32(Request.QueryString("id"))
'Connect to the database and bring back the image contents & MIME type for the specified picture

[Code]....

View 1 Replies

Databases :: Passing Parameter Using ODBC - Mysql?

Sep 3, 2010

I'm having problem on passing parameter on odbc because it's not working at all. I tried this using sql and I have no problem at all. All are working fine. Is there a different syntax on odbc? Here's my code:

[Code]....

Or using mysql connector/net to use mysql. I'm having problem installing it because the visual studio integration is not working, so I can't find it on the data source provider.

View 12 Replies

Databases :: Remote Access Mysql Db Odbc?

Mar 29, 2010

I am trying to make connection to a remote database server and I am getting the following message. I think i have to grant access to the client maching from my database server.. How do i grant access to an ip addess?

ERROR [HY000] [MySQL][ODBC 5.1 Driver]Access denied for user 'thelp'@'123.29.14.30' (using password: YES)
ERROR [HY000] [MySQL][ODBC 5.1 Driver]Access denied for user 'thelp'@'123.29.14.30'(using password: YES)

View 2 Replies

Databases :: MySQL Must Use ODBC Connector - Trying To Pass Parameters?

Jan 19, 2010

I am with GoDaddy (yeah, yeah, don't want to hear it) and must use ODBC to connect to my MySQL database. The connections are working fine but I have a GridView/DetailsView parent/child relationship set up between 3 pages. I know that these pages worked with a .NET Connector locally but after I changed them to ODBC, I only get the first part of the page, nothing that depends on data being selected works. This has led me to believe that I must alter the way I pass parameters to the next request page. I have read some things about using a question mark but I cannot figure out how I should apply it to my page as most examples are in C# or VB. My page is mostly pure ASP.NET and I'm not sure if I still continue to utilize the asp:ControlParameter. the code below.

how to get GoDady to alter their medium trust to accept sockets???? That's all it would take

This is the page my employees will use to view the people in the database and then select them and have a details view of that particular cust_code (customer code) pop up to the right of the gridview:

[Code]....

This is the page ( UpdatePrefCustomers.aspx ) that my employees, who will be allowed access it (yes, I already know how to apply authorization but will do it last before deployment so it doesn't drive me crazy when I preview in browser), will use to add, edit, and delete from the database. It must be accessed first and the other two pages, prefcust_edit.aspx and prefcust_insertt.aspx are called from it by passing the parameter cust_code:

[Code]....

Here is the prefcust_edit.aspx page:

[Code]....

Here is the prefcust_insert.aspx page:

[Code]....

View 8 Replies

Databases :: ODBC 3.51 Driver]Can't Connect To MySQL Server

Feb 17, 2010

System.Data.Odbc.OdbcException: ERROR [HY000] [MySQL][ODBC 3.51 Driver]Can't connect to MySQL server on '127.0.0.1' (10048)ERROR [HY000] [MySQL][ODBC 3.51 Driver]Can't connect to MySQL server on '127.0.0.1' (10048)

[Code]...

View 5 Replies

VS 2008 - ODBC Connection To Local MySQL DB Throws (Datasource Name Not Found)

Jul 9, 2013

I'm busy working on an ASP.NET Web Application (3.5) and can't seem to connect to a MySQL DB. I first created the entire application using a WinForms template and everything works 100%, but as soon as I move the exact same code to the Web Application, I can't connect anymore. Here's the code:

Code:
public class DBC {
OdbcConnection connection;
public bool CreateConnection() {
try {
string connFormat = "Driver={MySQL ODBC 5.1 Driver};Server=[SERVER];Database=[DBNAME];User=[UID];Password=[PWD];";
connFormat = connFormat.Replace("[SERVER]", Properties.Settings.Default.DBServer);

[Code] .....

As soon as I try to create the new OdbcConnection instance, I get the error:

Code: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

As noted this works in a WinForms app, and even more strange is that I don't even specify a DSN name...

All I could find from reading through forums all over the internet is suggestions of downgrading the MySQL ODBC driver version, which I'd really rather not...

View 5 Replies

Parameters In Query The Database Doesn't Update In C# And Mysql Using Odbc

Nov 30, 2010

when i specify values in my update query the query works fine and the database gets updated, but when i use parameters in my query the database does not update here is the code i have written

try
{
OdbcConnection MyConnection = new OdbcConnection(ConfigurationManager.ConnectionStrings["myconn"].ConnectionString);
MyConnection.Open();
String MyString = "UPDATE orddetpabak SET jud1=@jud1,jud2=@jud2,jud3=@jud3,adv=@adv where fil_no=@fil_no AND orderdate=@orderdate";
OdbcCommand MyCmd = new OdbcCommand(MyString, MyConnection);
String j1=DropDownList4.SelectedValue;
String j2=DropDownList5.SelectedValue;
String j3=DropDownList6.SelectedValue;
String j4=TextBox4.Text;
String j5 = HiddenField1.Value;
String j6 = TextBox3.Text;
MyCmd.Parameters.AddWithValue("@jud1",j1);
MyCmd.Parameters.AddWithValue("@jud2",j2);
MyCmd.Parameters.AddWithValue("@jud3",j3);
MyCmd.Parameters.AddWithValue("@adv",j4);
MyCmd.Parameters.AddWithValue("@fil_no",j5);
MyCmd.Parameters.AddWithValue("@orderdate",j6);
Response.Write(DropDownList4.SelectedValue);
Response.Write(" " + DropDownList5.SelectedValue);
Response.Write(" " + DropDownList6.SelectedValue);
Response.Write(" " + TextBox4.Text);
Response.Write(" " + HiddenField1.Value);
Response.Write(" " + TextBox3.Text);
MyCmd.ExecuteNonQuery();
//MyConnection.Close();
}
catch(Exception epp)
{
Response.Write(epp);
}

View 1 Replies

Configuration :: Web.config - Odbc For Entity Framework - Odbc Tcpip Parameters In Connection String?

Jan 12, 2011

my webserver is in the DMZ. The Database in the intranet. For connection from webserver to database the following entry is made in the odbc connection "TCPIP BCAST=NO;HOST=Intranet.Firma.local,Intranet_Spiegel.Firma.local,Intranet_Arbiter.Firma.local;PORT=2639}"

how to get this options in the connection strings working, or how i must modify the entitiy framework connection string to use the odbc entry?

<add name="KA_Entities" connectionString="metadata=res://*/Models.KA_Model.csdl|res://*/Models.KA_Model.ssdl|res://*/Models.KA_Model.msl;provider=iAnywhere.Data.SQLAnywhere;provider connection string="UserID=user;Password=password;DataSourceName=Databasename""
providerName="System.Data.EntityClient" />
<add name="KAPortal" connectionString="UserID=user;Password=password;DataSourceName=Databasename" providerName="iAnywhere.Data.SQLAnywhere" />

I tried to use odbcfor the entity framework, but the Wizard always add the right .NET Provider and not the odbc

View 1 Replies

Databases :: Connection Error MySql In The Picture

Jan 4, 2011

Connection Error MySqln the pictureImageof Visual Studio 20

View 1 Replies

Databases :: MySQL Error: The Connection Has Been Disabled?

Feb 15, 2010

I keep getting this error when inserting a lot of data into a mysql databaseERROR [HY000] [MySQL][ODBC 3.51 Driver][mysqld-5.1.40-community]Got a packet bigger than 'max_allowed_packet' byte

View 1 Replies

Databases :: MySQL Connection String For Update?

Feb 14, 2011

Although the below connection string works for Select, Insert and Delete functions I can't get to work with Update.

Returns error 'unable to connect to MySQL hosts'
Sub Edit (sender As Object, e As EventArgs)
Dim myConnection As MySqlConnection[code]...

I have fried a multitude of combinations, also from MySQL site without success.

View 2 Replies

Databases :: Run A With Mysql Db Connection Web Page In A Webserver Using Mysqlconnector?

Feb 25, 2010

How to run a asp.net with mysql db connection web page in a webserver using mysqlconnector?

View 7 Replies

Databases :: Connection Pooling With Microsoft Enterprise Library In Mysql

Jun 9, 2010

I am using microsoft enterprise libarary to connect to mysql using mysql .net connector (latest version 6.2.3)

But i am facing a problem of too many connections and connection pool reached maximum limit issue.

As connection is disposed by enterprise library iteself so i dont close the connection anywhere.

So after two or three hours i found i have 100 mysql connections in sleep mode which are doing nothing and are not being reused from the code .

So i want to ask is there any issue with my code or is there any issue with mysql connector

View 1 Replies

Databases :: MySQL Connection No Longer Works After Publishing Project

Jan 21, 2011

To start, I am a new web developer. I have been writing C# for about a year, but just recently learning web development. I wrote an application that connects to a MySql database and when I run it on my localhost it wokrs great! I created a ubuntu server on amazon ec2 and it is hosting my MySql server. It is up and running just fine. I created a windows 2008 server instance on amazon ec2 to host my asp.net project. I published my project to my windows server and I went to my public IP address and my site was there! it was so easy...

However, when I went to login, I recieved this error: Could not load file or assembly 'MySql.Data, Version=6.3.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d' or one of its dependencies. The system cannot find the file specified. I made sure the correct connector was installed on ym server. I have the most recent mysql connector installed. I do not know how the publish actually works. I saw some forum posts that said maybe I was missing DLLs from my bin directory but I cannot even find my bin directory for my project on the server. I also saw some posts about changing the web config file, but that was gibberish to me at this level.

View 3 Replies

DataSource Controls :: ODBC SQL Connection To Connect A SQL 2005 Database To .NET App In Visual Web Developer Express?

Jun 15, 2010

I'm using an ODBC connection to connect a SQL 2005 database to my ASP.NET app in Visual Web Developer Express. I'm finding that the expected functionality that tutorials review does not work for ODBC connected databases the same way as it does for SQL databases created in the Web Developer. For example, I can't use stored procedures because the option to create one is disabled in the Web Developer, and if I create the stored procedure in SQL Server Management Studio Express, it doesn't show up in Web Developer because Web Developer only finds the system stored procedures, not the user-defined ones. I've seen other cases as well where database management options in Web Developer don't work with ODBC databases.

Am I missing something in my setup, or is there an inherent limitation with ODBC connected databases? Or, is this a limitation with using the Express versions of these development tools?

View 2 Replies

Databases :: Update MySQL-database / Database Doesn't Get Updated

Mar 26, 2010

protected void Button3_Click(object sender, EventArgs e)
{
//Create a connection to the database
MySqlConnection conn = new MySqlConnection("Database=kid07025;Data Source=195.178.228.254;User Id=kid07025;Password=********");
//open the connection
conn.Open();
//MySQL Query which updates the row where Anvandarnamn = Anvandarnamn (recieved from a cookie)
MySqlCommand cmd = new MySqlCommand("UPDATE personer SET Information=?Information,Fnamn=?Fnamn,Enamn=?Enamn,Personnr=?Personnr,Adress=?Adress,Postnr=?Postnr,Ort=?Ort WHERE Anvandarnamn=?Anvandarnamn", conn);
// Update with new text
cmd.Parameters.AddWithValue("?Anvandarnamn", Request.Cookies["Anvandarnamn"].Value);
cmd.Parameters.AddWithValue("?Information", TextBox1.Text);
cmd.Parameters.AddWithValue("?Fnamn", TextBox2.Text);
cmd.Parameters.AddWithValue("?Enamn", TextBox3.Text);
cmd.Parameters.AddWithValue("?Personnr",TextBox4.Text);
cmd.Parameters.AddWithValue("?Adress", TextBox5.Text);
cmd.Parameters.AddWithValue("?Postnr", TextBox6.Text);
cmd.Parameters.AddWithValue("?Ort", TextBox7.Text);
cmd.ExecuteReader();
conn.Close();
RefreshProfile();
}

I don't know what I am doing wrong here, but the database doesn't get updated when I press the button.

I use VS 2010, ASP.NET

View 3 Replies

Databases :: Use MVC 2 With MySQL Database?

Jun 15, 2010

I want to use MVC 2 with MySQL database. Is it possible?because my shared hosting limits the size of SQL Server database, but there is no limit on Size of MySQL database.MySQL seems to take less disk space than SQL Server database which is costly on the Internet.

View 1 Replies

Databases :: How To Connect Mysql Database

Jun 11, 2010

how to connect mysql database in asp.net?

I am install mysql 5.0 then i install sqlyog.

After that i create the database sample in mysql with the help of sqlyog.

I want to connect the database in asp.net & display it on gridview.

[Code]....

How we set the connection string in mysql for use on aspx page?

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved