'DataTable' is an ambiguous reference between 'System.Data.DataTable' and 'Microsoft.Office.Interop.Word.DataTable'
View 3 RepliesI am having an issue that I do not quite understand. I had an ASP project that I built using
Code:
<add assembly="Microsoft.Office.Interop.Word, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C"/>
while I still had Office 2007 still on my development PC. I recently upgraded to Office 2010 and even though the web.config file still remains with the above assembly reference, when I publish it and run it now i keep getting the following error ...
Quote:
Could not load file or assembly 'Microsoft.Office.Interop.Word, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified.
I also have installed the PIA for Version=14.0.0.0 on the server but I still get the same result.
I'm hoping this is an easy one...I'm using Microsoft.Office.Interop.Word to convert uploaded word documents into previewable html files. I haven't implemented it fully, but I've played around with it enough that I think I have a plan that will work... My question revolves around
[Code]....
I'm not in love with the idea of opening word and closing it everytime there's an upload (which I hope is a lot of the time) I'd like to make this a shared object that loads at application start. I have 2 questions
that go along with this. 1. I imagine that winword could lock up and that would be a problem, right? 2. to save a document I use wordapp.ActiveDocument, this could have an issue as a shared object, right? I think I'm talking myself right out of this...
I have been using using Microsoft.Office.Interop.Word in my webserver (yes, i know it is not recommended). When I ran it on my machine, it runs fine, but when running on the server I get a timeout on the following line:Documents.Open //when trying to open the file.Is there something I'm missing? Is there a better way to edit a Word document within web servers/websites? (I can't create a new one using string builder or outputting into file; I need to edit an existing one that sits on the server.)
View 1 RepliesI was reading: [URL]
But I have give a compilation error:
CS0246: The type or namespace name 'DataTable' could not be found (are you missing a using directive or an assembly reference?
My server administrator does not allow me to install Microsoft Office in the server.
I have developed a website which converts XML files to Excel and it is using Microsoft.Office.Interop.Excel.
Is there any way I can run this application without installing Microsoft Office in the server?
i have the dataset with one table.Table contains three column like 'Name','Location','Pin'.I would like to move the data from another table based on schema.
View 2 RepliesIf I am passed a datatable and I cant change the column structure..is there anyway to set an existing column to a Primary key so I can easily Find() the row I am looking for?
View 1 Repliesim trying to copying specific record from one datatable to another datatable i used below code
public System.Data.DataTable selectspecificdatarow(System.Data.DataTable dtg, int count, int startindex)
{
System.Data.DataTable dtn = dtg.Clone();
for (int i =startindex; i < count; i++)
[Code]....
its taking too long time in cloneing is there any better way to do this task which is Time effecent
how to copy data from datatable to table in dataset i ry this but its readonly property
ds.datatable1=newdt.copy
how to join two datatable datas into one datatable to show in one gridview
i.e in 1 datatable i have username and pwd and in another datatable i have that user details. how to show all these in one datatable to get those values display in gridview(asp.net)
Dim dt As New DataTable Dim da As New SqlDataAdapter(s, c)
c.Open()
if Not IsNothing(da) Then
da.Fill(dt)
[code]...
When I call da.fill I am inserting all records from my query. I was then hoping to filter them to display only those where the GroupingID is equal to 0. When I run the above code. I am presented with all the data, the filter did not work. Please can you tell me how to get this working correctly.
I have a DataTable of available time slots. I have another DataTable of reserved time slots. I need to remove from the list of available slots the ones that have been reserved. The blocks are in 15 minute increments, but one of my problems is that the reservation can be longer than 15 minutes. I've had some luck removing one or two, but not all of the required columns.
Here's my code (it doesn't work right now).
[Code]....
I have two datatables, I want to get all records which are in one datatable but all matching records which exist in another datatable should not be available.
In terms of set, you can say that record which are in 1st datatable but not in 2nd DataTable.
System.Data.SqlClient is not filling DataTable named "Person" Go to [URL] Webpage message reads: Exception Details: System.Data.SqlClient.SqlException: Invalid object name 'Person'. Source Error:
[Code]....
Source File: d:hostingcforedDefault.aspx.vb Line: 41 Stack Trace:
[Code]....
I am creating a pivot table excel sheet in my ASP .NET web application using Microsoft Office Interop Excel 12.0 components. It is creating the excel file correctly, when i run it from my Visual Studio 2008 in Debug/Release mode.
But when i deploy the solution in IIS 7, first i got some permission issues, which i resolved by giving permission in the DCOMCNFG file. Now i am getting the following error, when trying to open the Excel file:
[code]....
These are the code which i used to open and close the excel application object
[code]....
I wrote some code about sending mail, Task, Appoinment etc. For example you can add someone to your outlook contact list over asp.net page. Every thing is ok on my local machine. But if I publish my application to a server I can not add noone on my outlook.
View 2 Replieshow to copy only the columns in a DataTable to another DataTable?
View 2 RepliesI have a datatable with 17 columns and a bunch of data. I wnat a datatable with only 6 of the columns and the data for those 6 columns. So I need a subset of the original datatable. How do I loop through the original datatable with 17 columns and end up with a datatable with only the 6 columns I want with the corresponding data for those 6 columns?
View 4 RepliesBelow is a beginning attempt to increment through a DataTable populated by a Stored Procedure and create a new DataTable where every Category is represented by exactly four products. I need to add dummy product entries for some and skip over those with over four products.
A) - I think I understand the basics but this builing from scratch is not my practice.
1) I do not know how to query a previous row in reference DataTable.
2) I do not know how to jump to next row from IF construct.
3) I hope I am able to build a DataTable row by row.
4) Partial sample data is at bottom of pseudo code
[Code]....
I'm having some difficulty merging multiple word documents together using Microsoft Office Interop Assemblies (Office 2007) and ASP.NET 3.5. I'm able to merge the documents, but some of my formatting is missing (namely the fonts and images). My current merge code is shown below.
private void CombineDocuments() {
object wdPageBreak = 7;
object wdStory = 6;
object oMissing = System.Reflection.Missing.Value;
object oFalse = false;
object oTrue = true;
string fileDirectory = @"C:documents";
Microsoft.Office.Interop.Word.Application WordApp = new Microsoft.Office.Interop.Word.Application();
Microsoft.Office.Interop.Word.Document wDoc = WordApp.Documents.Add(ref oMissing, ref oMissing, ref oMissing, ref oMissing);
string[] wordFiles = Directory.GetFiles(fileDirectory, "*.doc");
for (int i = 0; i < wordFiles.Length; i++) {
string file = wordFiles[i];
wDoc.Application.Selection.Range.InsertFile(file, ref oMissing, ref oMissing, ref oMissing, ref oFalse);
wDoc.Application.Selection.Range.InsertBreak(ref wdPageBreak);
wDoc.Application.Selection.EndKey(ref wdStory, ref oMissing);
}
string combineDocName = Path.Combine(fileDirectory, "Merged Document.doc");
if (File.Exists(combineDocName))
File.Delete(combineDocName);
object combineDocNameObj = combineDocName;
wDoc.SaveAs(ref combineDocNameObj, ref m_WordDocumentType, ref oMissing, ref oMissing, ref oMissing, ref oMissing, ref oMissing, ref oMissing, ref oMissing, ref oMissing, ref oMissing, ref oMissing, ref oMissing, ref oMissing, ref oMissing, ref oMissing);
}
I don't care necessarily how this is accomplished. It could output via PDF if it had to. I just want the formatting to carry over.
I wanto to create matrix report dynamically using Microsoft.Office.Interop.Excel.dll so that i can create pivot table and Report from this, how i can create these kind of repots where in user will drag and drop the details and it will create reports.
View 2 RepliesI'm trying to get a custommembership to work and i have the following problem.
i get a error class 'system.data.datatable' cannot be indexed because it has no default propert.
Here's my function.
Public Overrides Function GetUserNameByEmail(ByVal userEmail As String) _
As String
Dim userName As String = ""
Try
Dim mymember As New Data.DataTable
[code].....
I have QuestionTable.
ID Question Answer1 Answer2 Answer3 Answer4
But I want import from MS Word into table. I have question like this:
Question: @1.The capital of India.
Answer:$A) Dushanbe;$B) Moscow;$C) Delhi;$D) Kabul;
@2.The capital of Tajikistan.
$A) Dushanbe;$B) Moscow;$C) Delhi;$D) Kabul;
@3.The capital of Afganistan.
$A) Dushanbe;$B) Moscow;$C) Delhi;$D) Kabul;
Output result:
ID Question Answer1 Answer2 Answer3 Answer4
1 1.The capital of India. A) Dushanbe; B) Moscow; C) Delhi; D) Kabul;
I have a datatable with 1 record only, can I reference the data in the row without a for loop? I can get to the data by using the following code, but it would be nice if I didn't have to use the For loop.
foreach (DataRow row in dataTable.Rows)
{
string name = row["Name"].ToString();
string id = row["ID"].ToString();
}
I have only one row therefore may i get its records without for loop or foreach loop