I'm trying to collect the checked boxes values in a data list. Need to collect the checked value (ie "1") and the data key value (cdID) together in an array to then insert into DB. Here's the Datalist:
[Code]....
Here's my attempt(which isn't working too well):
[Code]....
I was able to gather a value from a gridview based on a selected checkbox. However, I would like to be able to grab multiple values instead of just one. I tried using a for loop to gather my information and populate labels as a test. However, that caused an error. This is the code I currently have to use.
foreach (GridViewRow gvr in GridView1.Rows)
{
if (((CheckBox)gvr.FindControl("CheckBox1")).Checked)
{
lblTest.Text = gvr.Cells[1].Text;
}
}
How to gather multiple values and populate other labels? the other labels are labeled accordingly as lblTest2 and lblTest3. I currently am gathering my data from a gridview and only want to pull the StaffID from gvr.Cells[1].text.
My problem is this "I have all the tools, VS 2005, 2008, 2010. I have every book, I have SQL server 2005 and 2008" I have all the tools, but I do not know what tool or technology to use when starting out learning all this. I juat do not know what book teaches what I need to do for something like below.
Here is my question:
I created an .ASPX webform that is to "Submit" to a SQL 2005 database. I gave this form to my DBA, and he has made up a Data Model. Now I have to figure out how to write the ASP.NET code so it will submit to the DB. My first issue is not knowing this:
1. "How do I loop through my CheckBox List", and then insert the values checked into a "Database Table" (Each Checkbox value MUST be a seperate row in the table, the DBA does not want a seperate column for each checkbox value)
2. The database is using stored procedures
3. My third issue is this: "I do not know "where" to put the "code". If you do resond to this,
Summary: I just need shown the code on how to "loop through" the CheckBox List on my form, and insert those values into a database table as seperate rows.
i have a check box list control that is used for showing related files to some post.
what i want to do is set the databound items "checked" to true by default
then,
if a user unchecks some item and clicks the save button. then the selectedindexchanged will fire and i will do some logic.
what i have done is.
--Set All Databound items to "checked" --
[code]....
in the end i want the item that was unchecked to be removed (all other items will remain checked). but even before that, when the user control is loaded all the files that were bounded are being deleted by the index change event.
I have a form built using the wizard control in VS 2008. I need this form to collect data and publish them to a sharepoint list or page?is this possible?
View 1 Repliesi have create 2 drop down list..and i set value for first DropDownList1..it's working good..
now i trying to add a method to collect all (list) data from DropDownList1 and split into words and display into DropDownList2..
when i add method to Default.aspx.cs page it nt working...
here's my code(no errors):
Default.aspx
<body>
<form id="form1" runat="server">
<div>
<asp:DropDownList ID="DropDownList1" runat="server"
[Code]....
I have a situation where I want to show the selected records out of total records for a product of an employee
1) There is a checkbox list bind to <List> of objects from object datasource (For total items in list)
2) Now I want to check the selected items for a particular record in this list
3) For this purpose I have another list of <List> selected items returned by data access layer (For selected items for that employee )
4) How do I bind the selected objects with the total items list ?
5) In spaghetti coding model it was all too easy just by binding the checkbox list with a sql data source and running a for each on form load
i m unable to bind data inside checkbox list. this is my code
protected void dlBreeds_ItemDataBound(object sender, DataListItemEventArgs e)
{
try
{
if (e.Item.ItemType == ListItemType.Item || e.Item.ItemType == ListItemType.AlternatingItem)
{
CheckBoxList cbl = e.Item.FindControl("cblAnimaltype") as CheckBoxList;
if (cbl != null)
{
cbl.DataTextField = DataBinder.Eval(e.Item.DataItem, "BGName").ToString();
cbl.DataValueField = DataBinder.Eval(e.Item.DataItem, "ID").ToString();
}
}
}
catch (Exception ex)
{
pnlStatus.Visible = true;
lblMessage.Text = ex.Message.ToString();
}
}
protected void BindAnimals()
{
//*********************************************************************************
// Purpose : To bind breeds in listbox
// Inputs : Nothing
// Returns : Nothing
//*********************************************************************************
DataSet ds = new DataSet();
try
{
ds = InvertebrateProviders.GetBreedsName_Invertebrate(1);
if (ds.IsInitialized)
{
DataView dv = ds.Tables[0].DefaultView;
dv.RowFilter = "ID<>0";
dlBreeds.DataSource = dv;
dlBreeds.DataBind();
}
}
catch(Exception ex)
{
pnlStatus.Visible = true;
lblMessage.Text = ex.Message.ToString();
}
}
<asp:DataList id="dlBreeds" runat="server" DataKeyField="BGName" OnItemDataBound="dlBreeds_ItemDataBound" RepeatDirection="Vertical">
<ItemTemplate>
<asp:Panel ID="pnbBreed" BorderColor="#7f9db9" Height="129px" Width="220px" ScrollBars="Vertical" BorderWidth="1px"
BorderStyle="solid" runat="server" Visible="true">
<asp:CheckBoxList ID="cblAnimaltype" DataTextField='<%#Eval("BGName") %>' DataValueField='<%#Eval("ID") %>' AutoPostBack="True" runat="server" Height="129px" CellPadding="0" CellSpacing="0"
OnSelectedIndexChanged="cblAnimaltype_SelectedIndexChanged" Width="200px" >
</asp:CheckBoxList></asp:Panel>
<asp:CheckBoxList ID="cblBreeds" Height="90px" Width="200px" runat="server" ></asp:CheckBoxList>
</ItemTemplate>
</asp:DataList>
i showed two column (Electronics,Photoshop) but i have six. i want to update their checked or unchecked condition in database (0,1) how do i do?
<asp:CheckBox ID="CheckBox1" runat="server" Text="Electronics" />
<asp:CheckBox ID="CheckBox2" runat="server" Text="Photoshop" />
<asp:CheckBox ID="CheckBox3" runat="server" Text="VideoEditing" />
<asp:CheckBox ID="CheckBox4" runat="server" Text="Gaming" />
<asp:CheckBox ID="CheckBox5" runat="server" Text="Coding" />
<asp:CheckBox ID="CheckBox6" runat="server" Text="Miscellaneous" />
I have a number of checkboxes embedded in a gridview. I would like to give users a dropdownlist based on when certain checkboxes have been selected.
I have tried to accomplish this by adding an onlick event to the checkboxes when they are loaded.
[Code]....
In my javascript i try to get the value that was selected. That worsk okay but when i item is de-selected i am confused about how to determine if there are no more selected rows that satisfy the condition i mentioned above.
Below is the javascript i came up with
[Code]....
Is there a way to get the values on a selected checkbox to determine if it satisfies a certain condition for displaying a dropdownlist?
Also, how can i loop through the checkbox items to make sure the conditions are met in order to display the dropdownlist
i have checkboxlist & gridview, in which i want to make multi selection using checkbox, so when i click on checkbox the data will filter according to selected check box and appear in grid.
View 1 Replies[URL] i am trying to display one check box that would perform 'selectall/deselect all' . As I have data paging, I assume I do not have the id's of page 2 yet. how would one go about implementing this.
View 1 Replieson page load I fill a repeater with checkboxes. I use a separate tablelist (subcatID & userID) to check if chkbox is checked or not.
On pageload and works fine (according boxes are checked):
[Code]....
When submitting the adapt button .. nothing happens and I can't figure out why ..
[Code]....
I have a form with three Gridview's. ie. GridView1,GridView2,GridView3.Each gridview contains two templatefield and a boundfield.The first templatefield is a checkbox field and the second one is a labeltemplate with databinding to field "Usr_Id" and the third field is for Name.I have enabled paging for all the three girdview's and different data's are populated on form_load.how can i maintain the checkbox status while paging for all the three gridview's.ie, when i check checkboxes in two pages in gridview1 and checked three pages in gridview2 and so on,i should get the check state of all the gridview checkboxes maintained.I know to maintain the checkstate for a single gridview but when i am checking the pages in second gridview ,the checkbox values of some pages of gridview1 is lost
View 5 RepliesHow to Filter Data/row from Repeater control in C.#Repeater control :---------------------All (15)shoes (3)shirts (12).Actually on click i want to filter data/row (posts) from Repeater control. Example: if i click on shoes 3 posts should display only but by default all 15 posts should display.
<asp:HyperLink ID="HyperLink2" runat="server" NavigateUrl='<%#DataBinder.Eval(Container,"DataItem.id", "./Default.aspx?id={0}")%>'> <%#DataBinder.Eval(Container,"DataItem.Category")%></asp:HyperLink>
[Code]....
when i use it on a empty webform it works nicely, however when i use it in a ListViews InsertItemTemplate it does not.get an error aying document.GetElementById is null and stops elowdocument.getElementById("CheckBoxListStr_0").checked = false
I have a Sql Data Source that queries my class database. What I'm trying to do to save myself some landscape is to check a checkbox if any of the pre-requisite fields are not empty. I have this laying inside a gridview. My code doesn't error out but it doesnt' do anything either.
[Code]....
My query is like this:
[Code]....
So in a nutshell, if there is any value in PR1 - PR7, I want to check my checkbox in the gridview.
I am trying to determine if the user selected a checkbox for each row in a ListView after hitting a submit button. If so, I need to get the record ID and one other piece of information from that row to insert their selection into a table. I would use a GridView but the questions must be grouped by their categories with the category names displayed followed by their corresponding questions (from what I've read ListView makes this easier).
I tried the code in this forum posting
[URL]
The problem I am encountering so far is that it keeps returning null even if the Checkbox is checked.
Here is my code:
foreach (ListViewDataItem lvi in lvQuestions.Items)
{
// Find the checkbox in each row
CheckBox cb = (CheckBox)lvQuestions.FindControl("cbQuestion");
// If the checkbox is ticked
[Code]....
Im basically listing a set of facilities in a datagrid. Like so:b Projectorcb Laptopcb TelevisonIn roomview, a check appears where a facility is availble in a room. This part works fine.The user can then edit the facilities, by clicking on the check beside each facility. When the update button is pushed I need to record the value of the checkbox, however I cant get the value of the checkbox.eres my codebehind:
[Code]....
I have a ASP.Net page that has a gridview control. This gridView control has a checkbox controls. I would like to assign a boolean value from a database field to the Checked property- Checked='<%# Bind("RESULTS") %>'.
When page loads,I get error - Specified cast is invalid!
The code is as follows...
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataSourceID="dsResults"
BackColor="White" BorderColor="#CCCCCC" BorderStyle="None" BorderWidth="1px"
CellPadding="3" OnRowUpdated="GridView1_RowUpdated">
<Columns>
<asp:TemplateField HeaderText="COMPLIANT" SortExpression="RESULTS">
<EditItemTemplate>
<asp:CheckBox ID="CheckBox2" runat="server" Checked='<%# Bind("RESULTS") %>' />
</EditItemTemplate>
<ItemTemplate>
<asp:CheckBox ID="CheckBox1" runat="server" Checked='<%# Bind("RESULTS") %>'
Enabled="False" />
</ItemTemplate>
</asp:TemplateField>
Note: If a constant value is passed at design time it works fine. But i want to assign the value at runtime using Bind.
Environment details: VS 2008, ASP.NET 2.0 and .Net Framework 3.0 & C# language.
I tried returning values like 0s and 1s, Ys and Ns and True and False from a database field. But i still get the above mentioned error.
I tried retreving the value in OnRowDataBound event using Eval, since Bind is not available in code behind. But it would make the field readonly and i cannot edit and update the Results field.
Even though there is a value returned by the query why does the Checkbox does not assign the value using <%# Bind("Results") %> to Checked property instead throws error - Specified cast is invalid.
how i can edit and update Checkbox.
where did the Bind method of ASP.Net 1.x is moved? How can i use Bind in code behind of ASP.Net 2.0?When i type DataBinder the intellisense shows Eval and other stuff but i don't see Bind that would solve the problem of two- way binding.
Is it possible to first add controls (ie. CheckBoxes) to a GridView with AutoGenerateColumns set to true. Then to click a single save button which loops thru the controls in the GridView, gets their values (ie. Checked/Not Checked) and then saves those values to a database?
View 9 RepliesI got a list of customers That I'm gone show in the gridview. I have added a checkbox infront of every customer so i can select what customers gone be used and passed to the next method. With a little bit of strugle I almost got everything working now except for this thing with keeping the values of checked customers when I page to the next page (2,3,4,5 ect).
View 1 Repliesi have a form with several checkboxes....i want to insert the selected checkbox values in to a single column in the sql database..
View 4 RepliesI have to select checkboxes besed on group column values. If you see below gridview, column 3 (GroupN) has 1,1,1,1,2,2,2,2....etc (this column data is not static, will change based on page index. i.e PageIndex =2 may starts with 7,7,7,8,8,8,8,8,9,9,9 etc).
Now My question is.
1). If user selected '1', we have to store value and user must and should select another '1' (atleast two times).
2) If user selected '1', and user trying select '2'. Giving error says "Must have select one then one record in group to combine' (will not allow) and unselect '2'.
3) If user selected '1' atleast two times, and user trying select '2'. Will allow.
4) If user selected '1' atleast two times and selected '2' one time, trying to select '3'. will not allow user to select '3'.
i got my checkbox control in each row.actually my problem is i bound checkbox in a gridviw and i need those checkbox are checkd if database values are match.i do it like below
[Code]....
but problem is only one checkbox is checked.in page_Load i bind gridviw in ROwDatabound event i check Duecode in another table.so i need only matching checkbox should be checked.