Forms Data Controls :: Master - Detail View - Get ONLY One Item From The LinqDataSource On The Page
Feb 22, 2010
Im making a Master details web page ASP.NET. I have one aspx page with all the items in a listview, then a link to another page to show the details view, but I dont want to use a asp:detailsview control becasue it generates a table, and I want a more complex layout. I want work each property of the item, but I dont know how. I want to do in LINQ. This is my very bad aprox: I need an orientation of how to get ONLY one item from the LinqDataSource on the page load and not to query the database everytime I need a column. I dont need biding because I only need to show data, not insert, not update, not delete...
View 2 Replies
Similar Messages:
Jul 30, 2010
I have an "Edit" page that uses a FormView bound to an EntityDataSource. The page is called with the ID field of the record to edit in the query string: "EditEmployee.aspx?ID=10". The EDS the FormView is bound to is using: AutoGenerateWhereClause=true and a QueryStringParameter. Below the FormView I have a ListView that contains some child records of the FormView. The ListView is bound to a seperate EDS and also uses the (same) QueryStringParameter.
The problem I am having is when this ListView attempts to Insert or Edt a column I receive an error because I don't have the ID field (EmployeeID) of the parent bound anywhere in the ListView (and obviously, it is setup as a ForeignKey so it fails, like it should). Any advice on the best way to get this ID (EmployeeID) column bound in the ListView? There are many things I can do in code behind, but I would like to solve this in the markup if possible. I can move the ListView so that it is inside of the FormView if necessary.
View 1 Replies
Feb 18, 2011
Here's my GridView control:
[Code]....
And here's my FormView control:
[Code]....
The problem is, when I click on the GridView item, the formView control does not show the detail.
View 1 Replies
Aug 6, 2010
I'm trying to setup is a News module with article listing paging and article detail paging. I have a GridView with paging that lists my articles just fine. In that list, some article titles have links that direct to an article detail page by passing in the articleID to the details page. I was able to setup my details page, which uses a DetailsView control, to use paging by using an ObjectDataSource with pageIndex and pageSize parameters from the querystring. Once on my detail page, I can use my navigation arrows to move through Next and Previous articles just fine.
No matter which article I click in my article list, my detail page always starts with pageIndex 0 and thus not the article I clicked on. I understand why that is because it's going by pageIndex value instead of articleID. What I need it to do is, set the detail to whatever articleID i pass in, then allow me to navigate Next and Previous to THAT particular article instead of starting me off from pageIndex 0.
[Code]....
View 2 Replies
Feb 6, 2011
article on binding to a list and I've got that working fine on one view. But what I'm stuck when doing it off a master record. Everything seems to work except that when I look in the database the detail records previous associated with the current master have their Foriegn key to master set to Null and a new set of detail records have been inserted. I've got a really simple form for this object
[Code]....
The form collection comes back with the expected prefixes:
[Code]....
And the Controller.UpdateModel(master) binds all the properties correctly. But when I call dbContext.SaveChanges it issues the follow sql from sql profiler (psuedo code)
[Code]....
I've got a work around that works but it's pretty hackish and I'm currently not matching up the keys so it's dependent on everything coming back in the right order. Plus I've got to include all the fields that I want updated.
[Code]....
I thought that entity framework's code first was the culprite but I've unit test that and it works fine. I've got a feeling that UpdateModel is somehow removing and re-adding the children. Has anyone else got this to work? Of course, I could throw in the towel and parse the indexed field names myself, but I'm so close!
View 2 Replies
Sep 15, 2010
I would like to make the datagrid bound column to redirecting to the details page .
For example , when my mouse over certain row of bound column in datagrid , it will change the colour to blue . Also , I can click anywhere of the row and the will redirect to the detail page .
Notes : I do not want to use hyperlink column and do not want to fix the text for every row. I want to use datafield, CommandName and CommandArguement.
View 9 Replies
Jul 27, 2010
I have a Page with a FileUpload control on the top with the "Insert" button, in order to insert pictures Below that, i have a Listview showing all the pics. THis is the way i am placing my Update Panel:
[Code]....
How can i, press the INSERT button and reloads only the Content Template after INSERTING?
View 3 Replies
Sep 8, 2010
Members view (index) that lists members that users can select to show a partial view in the same view with details for the selected memberUses jquery (Ajax.ActionLink) to call a partial view method in the members controller to then load the members detail sectionWorks fine up to here....but I'd like to load the partial view with "member" details for a default or random member on initial load -- ie not through the Actionlink selectionHow do I invoke the partial view method on the initial load?
View 4 Replies
Jan 26, 2010
I've been experimenting with using EF (asp.net 3.5 sp1) with a master detail page. Using northwind as the database, I'm simply trying to have categories as master and products as detail. I have read everything I could find on the net about the where condition and it still fails with this error as soon as I click the select link in the master grid:
Microsoft JScript runtime error: Sys.WebForms.PageRequestManagerServerErrorException: A property with name 'CategoryID' does not exist in metadata for entity type 'WebAppEF01.Products'.
What strikes me is that the CategoryID column is not exposed by the EF model. That's been rolled up into the navigation element 'Categories' I suppose...but on the surface this seems to create the problem I've running in to. I've tried turning off the autogeneratewhere clause but didn't have success. The code for this page follows below.
[Code]....
View 2 Replies
Aug 10, 2010
Master Detail (in the same view)
View 3 Replies
Apr 7, 2010
I am using a GridView and a DetailsView to establish a master to detail form, the idea is to let user select a record on Gridview and Detailsview will load selected record for editing. Here is declaration for the ODS and Detailsview.
[Code]....
this is working fine when I select a record from GridView and edit/update it in DetailsView. But it's not working so well when I insert a new record using DetailsView, because after insertion the selected record remains as the record selected in GridView.
View 4 Replies
Aug 11, 2010
So here is the situation - there is data on master records - its a hierarhical view - something like (ID, IDParent, Title) and detail data - (ID, IDMaster, Details)
And like to build UI using an TreeView - binded with master data - and an GridView - binded with detail data.
Question is witch property to use to create the master/detail chain between Datasources - oh, I've forgot to tell I'm using an ObjectDataSource?
View 3 Replies
Mar 14, 2010
I have a gridview that displays some records....i have added a new column to it called Edit....now when i click the edit link it should take me to a new page where i can edit that particular record only.....how do i go about it? I am using forms and no inbuilt ASP.NET controls except gridview....so i need to write queries for the same.....plz post code if possible
View 14 Replies
Jul 2, 2010
I am using a Datalist and a Listview in a Master/Detail relationship. Each time a DataList item is bound, a Listview is loaded dynamically. I have provided the relevant Layout and Item templates. It is worked fine for one item. But for more than one item, it will raise the following error: "An item placeholder must be specified on ListView 'ItemListView'. Specify an item placeholder by setting a control's ID property to "MyLayout$itemPlaceholder". The item placeholder control must also specify runat="server".
Despite having set up the item placeholder.
Here is the code-behind:
protected void NodeDataList_ItemDataBound(object sender, DataListItemEventArgs e)
{
if (e.Item.ItemType == ListItemType.Item || e.Item.ItemType == ListItemType.AlternatingItem)[code].....
The Layout template:<asp:PlaceHolder ID="itemPlaceholder" runat="server"></asp:PlaceHolder>
View 3 Replies
Nov 14, 2010
I made my own master-detail pages using a listview. Rather than url, I use a listview event to set a session variable and response.redirect to the detail page, which on Page Load, loads the data from the database using the session variable, where it can then be edited. The details page is basically just text boxes and dropdownlists, but I used some third party controls and it all looks really sharp.
Here is the corner I pained myself into. Several dependent dropdowns on the master page filter the main listview. If I go back to the master page using response.redirect, the user would have to use the dropdowns again just to get back to where they were before they went to the details page. This is just not going to work.
To further complicate things, I wanted the master page to have paging on it. So if a back button reloads the page, they would have to set the dropdowns again, and page through the data again if needed. Egads.
The closest I have come to working is using a javascript back back button, but this fails after some postbacks on the details page (that are needed). And of course, the master page isn't refreshed when you go back to it (but I could probably live with that).
View 5 Replies
Jan 18, 2010
have been through this que a long time ago, but seem no ans was found. I gonna post it again.I have a Detail view to control the detail of user, but i didn't bind it with any data source, the only i use is bind it with the sql command in vb.net code. I can open the Dv in edit mode but cannot update it with update button. I have read many post but some use data source or use store procedure. I can't use both.I do this because i wan to update multiple sql statement.
View 6 Replies
Oct 22, 2010
how to get check box value from grid view content page/ master page
i am using following code to get the value of check box from grid view content page / master page but it not works properly
[code]....
View 4 Replies
Jul 7, 2010
I use Gridview along with Formview for master/detail viewing. When I change sorting in gridview selected index changes, too. I mean, eg first top record is still selected but it's another id. What I want is to keep id of selected record, in case of need changing a page
[code]....
View 3 Replies
Jun 13, 2010
When I send a strongly typed ViewModel containing other ViewModels nested inside (basically spanning 3 tables into one object) all the data is correctly presented when debugging. However it complains at rendering time with an exception "Compiler Error Message: CS1061: 'object' does not contain a definition for 'Name' and no extension method 'Name' accepting a first argument of type 'object' could be found (are you missing a using directive or an assembly reference?)"
and the error is thrown from mvc2-rtm-sourcessrcSystemWebMvcMvcViewPageControlBuilder.cs method:
ProcessGeneratedCode line 19
PageBaseType is null all the time
[Code]....
ViewModels
[Code]....
Database
3 tables make up for the ProjectModelView object
users
projects
project_bids
View 5 Replies
Jul 28, 2010
I'm currently working on a project, i have got a web form and some text fields and drop down lists and radio buttons, i manage to store them in the database after the users click on the submit button. Now i need to display all these values in a detail view in a new web form page. Is it possible? How should i go about doing it or is there any other alternatives since i did not use the grid view for users to store their information.
View 1 Replies
Jan 4, 2010
I was trying to update a detail view from code behind (vb.net). I know how to fire the event but dont know where to put the DML query where i should do update and insert, i mean in which event?:
update.aspx
[Code]....
update.aspx.vb
[Code]....
No error but is not working.
View 9 Replies
Jul 9, 2010
I have two tables. One table containing 1 master record and the other table containing multiple records per 1 master record. I want to only display in a gridview (or whatever is best) the master record AND its assocated detail records IF certain fields in the detail records are there. I have been trying to figure out how to do this but I am still a bit of a newbie and I don't how I can do this.
View 9 Replies
Apr 30, 2010
I am using the multiview which on one view has my gridivew and the other has my detailsview. My gridview is a template gridview and I have a button for edit and another for delete.What I want to do is when either the user clicks the edit or delete buttons that the appropriate record is selected and the multiview view is changed to the detailsview showing the selected record.My datasource is microsoft's object container datasource NOT the objectdatasource and I am using model view and controller design pattern in my coding.
View 2 Replies
Sep 22, 2010
I have a single web page with master detail form/input layout. Currently the form works in a way like
User opens the page containing both master/detail data entry controls and enters the master information (The details save button is disabled)When he saves the master information, the save master button gets disabled and save details is enabled User continues to enter multiple details which get populated in a gridview at the bottom of page All works well Problem is that, the master part contains a lot of data entry controls (drop down lists gridviews etc)
How do I facilitate the user much more then the current layout? Should he be redirected to a new page after he enters the master record ? How can I improve on this?
View 2 Replies
Jul 1, 2010
I am using a "Detail View" to edit the data in my "Customer" table. The fields are "CompanyName", "ContactPerson", "StreetAddress", and "City". If I type data into the first field ("CompanyName") and then press the "tab" key, control moves to the second field "ContactPerson". However, if I type data into the first field ("CompanyName") and then press the "Enter" key, instead of control moving to the second field ("ContactPerson") the program closes the form.
Is there someway that I can control the action of the "Enter" key so that this will not happen?
Also, is there any way that I can have control move from the first field ("CompanyName") to a field other than the seconc field ("ContactPerson") if the content of the "CompanyName" field contains the value "Internal"?
View 1 Replies
