Forms Data Controls :: System.ArgumentOutOfRangeException For Gridview
Jun 14, 2010
I have this code:
Protected Sub
GridView_RowDeleting (ByVal
sender As
The code above is attempting to get the text value of a hyperlink field in a gridview. (The gridview has a delete link also.) It displays 3 pages. I go to the last page and try to delete a file and I get this error:
Specified argument was out of the range of valid values.
Parameter name: index
It fails on this line:
hl = (GridView.Rows(e.RowIndex).Cells(1).Controls(0))
I have determined it fails on the Controls index. I use this exact code with an almost exact gridview in another web form and it works fine.
View 5 Replies
Similar Messages:
May 17, 2010
I've got a ArgumentOutOfRange Exception when trying to get the datakey from a gridview.
[Code]....
[Code]....
[Code]....
[Code]....
Does anyone has a solution for this error?
View 3 Replies
Sep 29, 2010
Synopsis: I have a AJAX enabled ASP.Net application, the purpose of which is to allow users to ad hoc drill an engineering database. The application UI is divided into three sections, Filtering, Column Selection, and Results. The filtering section (implemented as a user web control) uses a PlaceHolder control, to which I allow addition and removal of individual Filter user controls.
All of that works well. The Filter user control essentially consists of three ComboBox controls with SqlDataSources bound to each of those ComboBoxes, and a TextBox to enter in a value. The first ComboBox, once a value is selected in its list, passes the SelectedValue to the SqlDataSource of the next ComboBox, which uses that value as a Select Parameter so the DataSource can fill out the ListItems of the next ComboBox. So simply, the results of the previous one cascade to the next.
Again, all this worked well. But one of the requirements was to allow storage of these queries the customer comes up with, allowing them to reload the query at a later time to run again.
I implemented that by writing a simple set of container classes, Filter, Column, and Query, where Query has public arrays of Filters and Columns. I serialize that simple Query object, then store it as XML in my database. To reload it, I de-serialize the xml, and rebuild the Query object, which I then use in turn to rebuild the Filters and Columns.
And that is the problem. I am rebuilding the query, and I think I am setting up the Filters correctly. Everything reloads on the page, just as I had saved it. But then when I try to use the query, I get the error
System.ArgumentOutOfRangeException 'ComboBox' has a SelectedIndex which is invalid because it does not exist in the list of items. Parameter name: value
I believe the problem is that the SelectedIndex is attempting to set the index for the ComboBox before the DataBind occurs during a postback.What is curious about this is if I hadn't tried to load and initialize these controls myself and just added a bunch of fliters setting ComboBoxes as I go, it has no problem maintaining the SelectedIndex, the list of values in the ComboBoxes and so on during a postback. I don't believe in that case it is even doing a DataBind for those controls.
View 4 Replies
Jun 21, 2010
Specified argement was out of range of valid values. Parameter name i: That was my error see the code below:
[Code]....
Was is causing the error and how do I fix it?
View 3 Replies
Aug 31, 2010
I am currently adding checkbox functionality to a system. I would like to check a group of users and add them into a db table. I currently have the administrator values flowing into the db table fine but it will not insert the empID into the table from the gridview. Here is my code:[Code]....
View 5 Replies
Jan 3, 2010
I have been using Grid View sorting with images already but this case is slightly different.
I was going through the tutorial here [URL] pages there is a grid and i tried to implement sorting with images to this grid but i failed.
Here is my c# code
[Code]....
aspx page
[Code]....
The problem here is the datasource of Gridview is of type System.Web.Security.MembershipUserCollection
I am not sure how to convert or assign System.Web.Security.MembershipUserCollection datasource to a dataset or datatable/DataView and sort it.
View 4 Replies
May 6, 2010
I have a dillemma.. or more of a design hump.
I have a web application that allows a number of teams to be assigned placement rankings, thus giving the players on that particular team.. seed points.
I am stuck as to how to use a Gridview to display the Teams, then allow a ranking to be assigned to each team.
(Dont allow more than one number per rank [no two teams can ever tie, or have the same finishing place.
View 3 Replies
Jun 21, 2010
not quite sure where I'm going wrong here. I'm trying to manually handle sorting in a Gridview that is populated with the following data source:
[Code]....
[Code]....
[Code]....
At the moment, nothing is happening when I click on the column headings. I ran it in debugging mode in Visual Studio and put a breakpoint on the Sorting event handler. I noticed that the variable dtSortTable is empty even after the TryCast(VacanciesGV.DataSource, DataTable). If I hover over this statement in debugging, it shows the data from the file system, so it does appear to be reading it.
View 4 Replies
Jan 13, 2010
I have a gridview to update soem records, it works on my development laptop but when i use it on the webserver i get the following error:
Exception Details: System.FormatException: Input string was not in a correct format.
Source Error: [Code]....
Stack Trace: [Code]....
I have another page with a gridview that does exactly the same but from another table, and that works both on the development laptop and the webserver.the code is:
[Code]....
View 2 Replies
Jan 5, 2010
Unable to cast object of type 'System.Web.UI.LiteralControl' to type 'System.Web.UI.WebControls.TextBox'.
[code]....
View 3 Replies
Oct 1, 2010
Basically, what I did is that: I have a table in SQL database and some of data fields allow null. I built Objectdatasource through dataset. When I built update page using dataset. It generate the following error before showing the update page correctly. It seems I have issue to retrieve the null value from the database through using objectdatasource through dataset. Any suggestions?An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code
View 6 Replies
Sep 30, 2010
I am trying to upload a picture into database using FormView insertItemTemplate. FormView is bounded by objectdatasource.To upload, I placed FileUpload control inside insertItemTemplate.In table the dataType is image.Error:Object of type 'System.Boolean' cannot be converted to type 'System.Byte[]'.
View 3 Replies
Jul 12, 2010
in my web project i got an error that i couldnt find any solution. the error says: System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. when i work in local there were no problem i put files to our server and i changed the database also. when i work in server in web application in Default.aspx i can connect db and get values without any problem using my DataLibrary
BUT the problem in my web service i also use my DataLibrary in webservice but when i try to run a method in web service it gives me the error which is : System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
my new db connection is
strConnectionString = "Data Source=OURSERVERNAME\SQLEXPRESS;Initial Catalog=DoveTR;Persist Security Info=True;User ID=sa;Password=123456789;Pooling=True";
View 1 Replies
Nov 23, 2010
I'm trying to build a chart in my application which will act as a client for an ASP.NET 3.5 web service that I created. The error I get is as follows:
Series data points do not support values of type System.Data.DataViewManagerListItemTypeDescriptor only values of these types can be used: Double, Decimal, Single, int, long, uint, ulong, String, DateTime, short, ushort.
I've tried various ways to resolve this but can't. This error points at the
chtStats.DataBind() line in the code below:
[Code]....
[Code]....
[Code]....
[Code]....
[Code]....
[Code]....
[Code]....
[Code]....
[Code]....
[Code]....
[Code]....
View 5 Replies
Oct 5, 2010
How do we get Text as a member of 'System.Data.SqlClient.SqlParameter'
See example of 'System.Data.SqlClient.SqlParameter', below:
[Code]....
Here is the snippet code to insert the Text as a member of 'System.Data.SqlClient.SqlParameter'
[Code]....
View 2 Replies
Jul 7, 2010
Trying to explain this clearly. I have a dropdown listbox where user can select multiple names. These names are then selected/inserted into db table in a loop. Table is displayed in an editable gridview. I have a main sqldatasource1 on my aspx page with select/insert/update permissions, but because select command doesnt work with parameters of multiple values (or does it?), i resorted to using an alternative sql datasource in the codebehind in order to run the select query on the multiple values chosen from the dropdownlist to see if they were in my table.I now get this error when I go to select multiple names from the dropdown list
Unable to cast object of type 'System.Data.Common.DataRecordInternal' to type 'System.Data.DataRowView'.
View 2 Replies
Apr 2, 2010
DataBinding: 'System.Data.DataRowView' does not contain a property with the name '@CACODE'.
Tried some ways.. The code:
[Code]....
View 2 Replies
Jan 28, 2011
The error i am getting for the below code is:Cannot implicitly convert System.Web.UI.WebControls.GridViewRow to System.Web.UI.WebControls.GridView
protected void GridView1_SelectedIndexChanged(object sender, EventArgs e)
{
GridView row = GridView1.SelectedRow;
strv1 = row.Cells[1].Text;
}
View 3 Replies
Nov 7, 2010
i am making a quiz system in asp.net using C# vs 2008.having one equestion per page,with previous and back button.each question have four options with only one correct answer.The options are in a radio button list.I have a database which has two columns as QuestionID,CorrectAnswer.
For viewing previous answer the user can click on previous button,so that he can see his previous marked answer and if feel he had marked the wrong option then he can mark the other one.
Some Problems:-
when clicking the previous button the option which was marked in radio button list got unchecked!!So,the user is unable to know which he had marked before.After completing the quiz how can the answers selected by the user be compared with the CorrectAnswer stored in database and can be displayed in the result page having four columns as QuestionID,CorrectAnswer,UserAnswer,Right/Wrong in a grid view.Though i am able to display the QuestionID and the CorrectAnswer in a grid view in the result page.
View 5 Replies
May 31, 2010
i have added an new chart (data from acces database, looks like that:
1 2
123 123
333 222 etc).
No errors, no exceptions, but i realy cant see image ;-)
when Im trying to righht-click on chart in my browser and choose "show image" i get :
System.ArgumentException: The image is not found.
View 2 Replies
Jan 22, 2010
Im creating a messaging system which is a bit like the inbox feature of this forum. So far I have built the page with a datalist (as this is the advice i was given). I just want to know how I should create the tables within the database so that the thread of messages is seen by the right people when they login and view messages. Which is basically the 2 people messaging each other. The system is gonna have user sign in functionality as well.
View 1 Replies
Jul 2, 2010
I have a problem that is really confusing me.. I'm trying get get info from a database and populate the relevant labels. I've got it working on one page, but not on another. The only difference is that the one that works is in a repeater.
My code is as follows:
[Code]....
The error I am getting is the following:
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. review the following specific error details and modify your source code
appropriately.
Compiler Error Message: CS0117: 'System.Web.UI.Page'does not contain a definition for 'DataItem'
Source Error:
[Code]....
View 3 Replies
Jul 30, 2010
I am having a problem about my gridview when it binds to an accessdatasource.
The error appears:
"DataBinding: 'System.Char' does not contain a property with the name 'Firstname'."
Here's my gridview:
[Code]....
Here's my code behind:
[Code]....
The error occurs when the selected index of the DDL is 1 and I have to bind it in an accessdatasource. First condition is working fine where I will check a value and put all items that matched the date criteria in a data table and then bind gridview in the data table.
The error is just when I bind my gridview in the accessdatasource.
AccessDataSource1.SelectCommand = "Select Firstname,Middlename,Lastname,Jobseeker.IdNo,SchDate,Time,Venue,JobPosting.JobCode,JobTitle from JobPosting INNER JOIN (Jobseeker INNER JOIN ApplicationProgress ON Jobseeker.IdNo = ApplicationProgress.IdNo) ON JobPosting.JobCode
= ApplicationProgress.JobCode where PostingHr = " & Session("Id") & " and SchDate = '" & Date.Today.ToString("dd - MMM - yyyy") & "' "
GridView1.DataSource = "AccessDataSource1"
GridView1.DataBind()
View 3 Replies
Jan 22, 2010
Argh.. I've run into thei before,but can't remember how I solved it.I have a gridview with a button in a template field.I've added an event to the button,but am getting the dreaded 'RowIndex' is not a member of 'System.EventArgs' error.
I'm trying to grab the value of a label in the gridview for the row that is selected when the button is clicked.Should I be using something other than e.RowIndex?
[Code]...
View 3 Replies
Jul 6, 2010
I have been trying to get the data display on the datagrid after selecting a customer.
With the same connection it populates the selection right. But just do not seem to extract the following SQL.
The litABC is to check the flow of control.
There is no syntax error but in the debug menu,
I got A first chance exception of type 'System.Data.Odbc.OdbcException' occurred in System.
Where did I do wrong?
[code]....
View 1 Replies
