How Does Websites Get Live Channel Coverage

Oct 26, 2010

there are thousand of websites on the internet that have live coverage of the channels ,cricket matches.how does they do that? from where does they pick the coverage?

View 1 Replies


Similar Messages:

Display A Live Streaming Of A TV Channel?

Jan 12, 2011

I am going to develop a website in asp.net , in which i will have to display a live streaming of a TV channel.

View 2 Replies

MVC :: Code Coverage Reports If Not Using TFS?

Nov 25, 2010

PM wants all unit tests to be documented, something I advised against. unit test are for devs by devs, and should be quick to create. To go and document them in a seperate system is going to make it cumbersome.

My point was that we just have to look at code coverage reports (using ms test, but not TFS...just SVN now) and use that "number" as guideline to know if we are doing our work in regards with testing. (not that a high coverage number mean unit test are done right).

View 3 Replies

MVC :: Code Coverage Using NUnit (in VS 2010)?

Jun 2, 2010

I switch to nUnit for my pet project (which I started over completely!).

However it seems doing so is costing me code coverage? Or am I just missing a simple and obvious way to enable code coverage when using nUnit.

I'm using ReSharper, which does a great job running my tests. However, VS itself seems not to recognize my tests at all?

View 3 Replies

Configuration :: Use To Copy/publish Websites To Web Server Is Not Allowing Us Access To Push Websites?

Oct 15, 2010

the account we use to copy/publish websites to our web server is not allowing us access to push websites. I've added this account to the permissions in the links listed in the below link, but i don't have success when trying to push remotely. When the account is in the local admins account, everything works flawlessly, but we are not allowed to have it in there. http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/31be047e-4716-4974-b8a1-be0111b50199 I've googled and searched a lot for this particular error, but am not finding an answer that helps. We get this error, 'Unable to create the Web 'http://edea01/test/planning'. You are not authorized to perform the current operation', and the above link is the scenario that matches mine the most. I don't do develompment work, but am asked to figure out this connection problem.

View 3 Replies

C# - Build A Live Chat Connected With Windows Live Messenger?

Feb 26, 2011

Live Chat is a very famous tool on websites, and the operators use a special web/windows interface to talk to the clients.What I want to implement is to specify some email accounts, and when the client click's the live chat and starts typing, his/her instant messages are delivered to the available email account. My operators can talk back to them as if they are on their friends list.I don't need to require any login or registration for clients to use this Live Chat.So are there any ideas about how to implement such a thing? Are there any good third-party-modules that already do that?

View 4 Replies

HttpHandlers / Modules :: Generic Handler / Prevent Data From Being Written To Live Table Via The Live.aspx Page?

Jun 28, 2010

I am using a generic handler (indicator.ashx) to create a graphic that is overlayed from information from a table (called LIVE) from our SQL database. This is working very well and I am very happy with the results.

However I am having an undesirable issue where the query string that is used for this is also being accessed by another page (called ReceiveLive.aspx) which is populating our LIVE table with data when we don't want this. I have been able to track this issue down to our generic handler that seems to populate this table with data whenever the handler is accessed.

The query string that is used to access our graphic through our generic handler is
http://mydomain.com/indicator.ashx?ID=ABC001.

Our other page that writes data to our LIVE database used the query string
http://mydomain.com/live.aspx?ID=ABC001 which is normally only accessed by a small piece of software that sits on the users PC and sends the data when necessary.

My question is this: How do I prevent data from being written to our LIVE table via the Live.aspx page everytime a query string is processed by my indicator.ashx is accessed?

View 10 Replies

Security :: Windows Live Delegate Authentication And Emails / Access Emails (New, Read, Unread Etc) from Live Account?

Mar 21, 2011

I am able to get a token with Windows Live Delegate Authentication samples provided by Microsoft.

Now I want to access emails (New, Read, Unread etc) from live account. How can I achieve it with the help of Windows Live Delegate Authentication? Are there any examples for the same?

The Samples given by Microsoft are not related to emails.

View 2 Replies

State Management :: Getting SessionID From Channel?

Aug 24, 2010

I need to set ASP.NET_SessionId in order to dowload a file from server.

I use the following code

IContextChannel mychannel = (IContextChannel)myService;
using (OperationContextScope scope = new OperationContextScope(mychannel))
{
res = myService.DoSomething();
System.ServiceModel.Channels.MessageProperties messageProperties = ......

View 1 Replies

Stream The TV Channel From TV Tuner Card In .net ?

Nov 15, 2010

I have system with TV tuner card. In my project, I want to stream one of the channel from my system to other users in my LAN.

I don't have any idea how to stream TV channel from TV Tuner Card.

I want to use ASP.NET with C#.

View 2 Replies

Displaying Videos From Youtube Channel?

Dec 7, 2010

I had YouTube Channel and I Had Web Page on my web site which display this video ,I diplay the viedo in ModalPopupExtender ,and I had problem when I finsihed from displaying this video and close ModalPopupExtender the sound of viedo still displaying.
' id="Image" runat="server" width="96" height="86" alt="Video" />
'>
' type="application/x-shockwave-flash"
allowscriptaccess="always" allowfullscreen="true" width="400" height="320">

[Code]....

View 1 Replies

MVC :: Parsing Weather Channel Xml File Using Linq

Aug 31, 2010

I never used linq before and i'm having trouble parsing the xml file at

[Code]....
[Code]....
[Code]....

View 10 Replies

AJAX :: There Was No Channel That Could Accept The Message With Action?

Jun 22, 2010

I'm hoping that i'm posting in the right forum. Does anyone know how to recitify the following error from WCF:

[Code]....

I read an article that it has something to do with downloading MEX metadata so I disabled the mex and httpGetEnabled to false but no luck.

View 1 Replies

C# - WebException Could Not Establish Trust Relationship For The SSL/TLS Secure Channel

Dec 20, 2010

My company has developed a .NET web service and a client dll that uses that web service. The webservice is hosted on our server over ssl and the cert is provided and signed by GoDaddy. We have some clients in a hosted environment that are getting the following error message from the client dll when it tries to access our web service.

System.Net.WebException The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.

Our fix has been to have them open IE on the server, which is a challenge in and of itself for a lot of the hosted services, and go to the WSDL url. IE then prompts them with a security alert dialog. It says the cert date is valid and a valid name matching the name of the page, but was issued by a company you have not chosen to trust. When they click Yes to proceed, the client dll can then succesfully connect to the web service and operate as normal. why GoDaddy would not have been in there valid publishers list? All of the servers we have running has GoDaddy as a valid authority. I'm guessing, for security reasons, they've uninstalled the authority for GoDaddy, but not totally convinced that there's not some other underlying issue.

Unfortunately, I haven't had much luck trying to recreate this locally. If I go into Internet Options and remove the GoDaddy authorities and hit our service, ssl works just fine. I go back into the list of publishers and GoDaddy gets put right back in. So my second question is, How the heck do you get rid of GoDaddy so I can get an invalid cert warning?

Okay, last question. Is there a way in code I can tell the web service to ignore invalid certs. I've seen some posts on doing this programatically with WCF but not old web services.

View 2 Replies

What Is The Default Connection Limit Of .Net Remoting Http Channel

Jun 13, 2010

When using .net remoting, does the server limit incoming client remoting calls?

I find a particular remoting call (during ASP.NET page rendering) to take from 200ms to 1500ms. While the underlying data call is only 50ms. Factoring in remoting overhead of 150ms per call, the only difference between the two cases is that the latter scenario has about a dozen more parallel remoting calls in progress. So my guess is that when too many remoting calls are happening, some will get queued up? I also doubt system resource is the cause of the delay because it is not nearly saturated.

Searching MSDN, I find the below:

http://msdn.microsoft.com/en-us/library/ms973907.aspx
clientConnectionLimit: specifies how
many connections can be simultaneously
opened to a given server. The default
is 2. This is exactly the same as the
connection limit on ServicePoint in
the net classes.

That seems awfully low to me and if were the case, my app's performance would have been much worse. Can someone confirm if there is indeed a connection limit or some other throttling in .net remoting?

View 1 Replies

WCF Service Failing Every 23 Hours - Request Channel Timed Out

Oct 27, 2010

We have a WCF service self-hosted in a Windows Service. Right now we're experiencing a really strange behavior with it, which is that every 23 hours, approximately, the service raises an exception for every call made to it with the following error: Server was unable to process request. ---> The request channel timed out while waiting for a reply after 00:01:00. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this operation may have been a portion of a longer timeout.---> The HTTP request to [URL]has exceeded the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout.---> The operation has timed out. The duration of the failure is between 4 and 6 minutes and, without touching anything at all, the service then goes out of the failure and the following responses are ok, for the next 23 hours, and then, again the error.

As pointed above, the WCF service is self-hosted in a Windows Service, installed on a Windows 2008 Server OS. The clients calling the service are two different Asp.NET web services, one running on the same server and the other on a virtual server in a production environment. Both clients have presented the same issue. The configuration of the complete environment is this: Phone calls are received in an IVR system (let's say node 1), which calls a web service (node 2) that retrieves some information about the customer calling. Once the customer approves the operation, the IVR calls the web service (node 2), which relays the call to the WCF Service (node 3) to process a credit operation. The WCF then makes a TCPIP socket operation through a VPN connection to another entity (node 4). That communication lasts between 3 and 10 seconds, is registered in a persistent database and then is sent back in the same path to the customer (node 3, 2 and 1). This platform processes about 2,000 transactions a day, 24/7, except for the ones failing with the timeout. The reason to have the transaction relayed to a second service is for security purposes. The amount of data exchanged in each call is about 200 or 300 bytes.

I've already tried most of the workarounds posted right here in stackoverflow ([http://stackoverflow.com/questions/981475/wcf-timeout-exception-detailed-investigation][1]) and the ones appearing there and some others found in google. The error is still persistent. The TCPIP socket operations are logged to a text file, and found no issues there with the response times from the external entity. The largest time was 9 seconds. Also, a database operations trace has been logged and did not show any performance issues either. The concurrency mode of the service is set to ConcurrencyMode.Multiple and, before going into production we made an stress test with ten clients making iterative calls over 2 hours, processing the wcf service about 30k transactions with no signs of performance impact. However, I already discarded a concurrency issue because the average time between transactions is one minute, and the largest one lasts for 9 seconds approximately. Besides, all other transactions complete successfully, independently of the load on the service.

I cannot increase the timeout of one minute given the fact that the service is for executing ecommerce operations and in fact there's nothing really taking more than a few seconds to complete. This are the facts, and I hope you guys could come up with something I haven't already tried yet. Please have in mind at the time of answering that this is a critical mission service, and the changes or configurations possible to apply in a production environment are very limited.

View 2 Replies

Security :: Could Not Establish Trust Relationship For The SSL/TLS Secure Channel With Authority

Jul 25, 2010

i have a web application that is using a https webservice and for accessing this webservice i have installed the PFK file into the mmc console in the personal storage folder and also installed in IIS. After installing the PFK file the properties of the installed PFK file shows a warning that "Windows does not have enough information to verify this certificate" but the installation is done with success. After this i go to add the wsdl to my project as service reference, but it shows the error "Could not establish trust relationship for the SSL/TLS secure channel with authority". What is the solution for this?

View 17 Replies

How To Get Code Coverage Working On A VS 2010 Project/Cannot Initialize The Project 'Project Name'

May 23, 2010

When I turn on Code Coverage in my test settings, on a project that references the Unity DI container I get the following error:

Cannot initialize the ASP.NET project'{Project Name}'.

The event log specifies the following reason:

Could not load file or assembly 'Microsoft.Practices.Unity, Version=2.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Strong name signature could not be verified.

View 2 Replies

C# - Live Site And Holding Side By Side Until Go Live?

Mar 26, 2011

I will shortly be going live with a new .net web application. It will be deployed to a load balanced environment over 5 servers.Before go live there is a holding site on all the 5 servers to which the domain is currently pointing ->Prior to go live, I would like to deploy the new site to 5 servers and for the holding site to remain and for it to be what the public sees. And when the time comes, I can put the new site live with a flick of a switch. I also want the new site to be on the servers so that I can test it prior to go live.I am running in IIS7. This is common practice I presume so what is the easiest way doing that above and achieve installing the new site on the servers will not affecting the holding site. The new site be accessible to me but the holding site be viewed by the general public.

View 1 Replies

C# - How To Set Img Scr From A Server That Is Not Live But Connected With Live Server

May 8, 2010

I want to display photo of employee who is login but our company doesn't want to expose the photos of all employees publically that is why we put that employees photos on a server that is not live but connected with the live server.Now problem it that when I run my website on localhost the photos of employees display but as soon as I publish it on IIS it doesn't display images.

View 4 Replies

Consolidate Several Websites Into One?

Apr 20, 2010

I will consolidate several web sites into one. I have a brief design in mind. Top row: banner sencon row (main menu): home, Applications (drop down-accounting, employeement, sports etc), Your Account In 3rd big row, at left side, there will be links (or just menu listed down) In the middle, there will be contents displayed related to top and left menu. for example, If a user selects application->Sports from 2nd row, then there will be links of Tennis, Golf, Volley ball appeared in the left. if the user click 'Golf' then the center page will display contents related to golf. I am not sure it will work with multiple sitemaps or database driven menu structure etc. How can I do that? Is it a good design?

View 3 Replies

Websites Look Different In Different Browsers?

Oct 29, 2010

I get different outputs in different browsers.

[code]....

View 1 Replies

How To Use C# For Building Websites

Oct 23, 2010

I'm wondering if I should learn everything in C# like what WPF and Win Forms should learn to be excellent web developer or is there specifc C# for the web?

View 3 Replies

How To Speed Up Websites

Apr 15, 2010

im developing some backends in ASP.NET 2.0 and i have put all the images in Cache, GZIPED my CSS, JS files and everything to speedup the load of each options.

the performance its good and i have no problems with the clients but i want "MORE" fast loads and im looking for some recomendations.

Is important to mention that those websites are using only in intranets so im thinking to implement my next projects using IFRAME for content that way (i think) the options will be loading faster because they not have to load the entire site.

EDIT:

im not using viewstates i wrote HTML (code behing) generated controls and use as less as possible ASP.NET Rich controls, all my static contents are in Static vars (Header, Menu, Footer) but im just looking for speed up a litter more.

After compile my website i compress all the HTML, CSS, JS and use less of those files as possible.

but i was seeying others Backend that loads faster than my and the difference is the IFrame control that they use (i think), we check code, design, etc and we use the same (they use #INCLUDES for static HTML instead STATIC VARS with the HTML)

View 5 Replies

Designing Websites Graphically?

Jun 21, 2010

I am still pretty unkskilled with web design and since I am still learning xml/html/asp.net I wanted to pose the following question: I would like to design a site that will need to be graphically well designed and user friendly. Would it be easier to continue learning asp/xml or find a software package that can do most of the hard scripting for me and just have me select and alter; like frontpage or something better?

View 6 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved