How To Access A WCF Service In A Virtual Directory In MVC Application
Feb 1, 2011
I am trying to deploy an asp.net MVC and a WCF service in a single website. The root site is the MVC application and i am going to run the WCF as a virtual directory of the site. However the service cant be accessed since the routing of the MVC would not relay the request to the service. It would say "Page not Found".
http://PC:9000 <- root of mvc application
I have a virtual directory for the wcf named "wcf",
http://pc:9000/wcf/service.svc <- should have accessed the service but routes of the mvc intervened and will display page not found.
how to make this work? How would i ignore the routing if the call is for the service?
I've searched far and wide, but can't find out why this is happening. I have a clientside javascript ajax call into a web service that works fine if both the service and the calling page are in the same directory. If I try to move the web service to another virtual directory, I get this:
Exception type: InvalidOperationException Exception message: Request format is unrecognized for URL unexpectedly ending in '/js'.
Here are the relevant code tidbits for the separate directories attempt.
aspx file:
[Code]....
CallYahooQuotesServiceMethods.js:
[Code]....
asmx file:
[Code]....
I tried this in my web.config, but it didn't work:
[Code]....
Authentication mode is Windows. If I have to impersonate to do this, I'm not sure how I'd pull it off with Javascript.
im a little bit angry, because i realy don't know how i can access a virtual directory a created in the IIS.
For example i created virtual directory called "Images" in the IIS under my default website. The "Images" folder is connected with my physical harddrive "D:Bilder".
Now how do i access this folder from code behind? I really tried everything but i can't load a image from this virtual directory :
Error 1 It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. C:PdfViewerPdfTestSiteWeb.Config 28
*********************************** When I double click the error it goes to Web.Config file to tag:
I have a CMS application that manages multiple websites, today whenever i change the codebehind of one of these websites - i have to rebuild the dll for all websites, deploy it - this disconnects all current sessions and is really bad.
The iis is configured to listen to all domain requests, if the request is to one of the websites' domain , the application rewrites it, or example, if someone requests for http://www.example.com, and example.com is configured in the application to be website 12, it is rewritten to http://www.example.com/websites/12/default.aspx.
This is done for all websites.
We want to seperate the dlls of the websites from each other, and from the main CMS, we have a virtual directory to each websites, but when trying to rewrite to it, we discover that IIS support this (we get an "Could not load type '_12._Default'". error).
How can we perform this rewrite so it does rewrite to virtual directories, or if anyone has any other solution for the initial dll seperation problem.
I'm totally stuck. I've tried many ways. I have a webapplication deployed on Win2003 with IIS 6.0. The website needs to access:
D:data on another PC.
I've sucessfully created a virtual directory (using local credentials to the data PC) in IIS and I am fully able to browse and view all the files. So now the webserver is: WebserverData.
In my behind code, I call filestream f = (Server.MapPath("WebserverDatasomedata.txt")));
and it tells me access to that location: \webserverdatasomedata.txt is DENIED. BUT I am able to browse on the Win2k3 IIS server.
I've set impersonation to true and used local username and password of the data PC. I've configured IIS to use the same username password.
It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. this error occured in web.config file.
I have a team currently working on a Web Application project, we want to be able to run the project through our local IIS web servers and let each dev map it to whatever virtual directory they like.Currently every time we check in we are stomping on each others virtual dir settings in th cs proj file.I know we could just agree on a virtual directory and stick with it but that does not solve another problem I am having with this where I actually keep multiple copies of the repository on my machine and want to be able to map each to a separate virtual directory.
So the result we are looking for would look like this:Dev1 has a checkout at say c:/dev/Webapp mapped to a virtual dir on their local IIS say localhost/WebAppThen Dev 2 has a checkout at say c:/workspace1/WebApp mapped to a virtual dir say localhost/workspace1/MyWebAppAND Dev 2 has a checkout at say c:/workspace2/WebApp mapped to a virtual dir say localhost/workspace2/WebAppPS. The reason Dev 2 has two checkout is because he uses on for active dev work and the other for merging between branches.
to the <system.web> section of my web.config. However, when I do that I get this error: It is an error to use a section registered as allow Definition=' MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
what else I might need to tweak? Is the comment about it not being configured as an application likely? It's a struggle to get permission to check the IIS settings, and the website works correctly without this section in the config.
i have developed website in MS framework 2.0 using Visual Studio 2005 Sql Server 2005 and Crystal Report 2008 (Version 12.0.0.549) due to some problem i have formated my pc and reinstalled Visual Studio 2005 Sql Server 2005 and Crystal Report 2008 sp3 (Upper version)on my pc now my website project running on IIS 5. is fine but when i open my website on visual studio 2005 it shows an error as below ...................
101 It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
D:NayanAdvance_TestAdvancesystemweb.con
it need registry i think so, Now i did't get this error exactly
We have created a website and for the secured files created a virtual directory and in virtual directory properties we selected Application-user(pass through authentication).If any user directly browse the files link then the browser prompts a screen for virtual directory credentials.Here my requirement is i need to send the virtual directory credentials through the application.
Each virtual directory is configured on IIS6.0 as an application with own AppPool.
When redirecting authenticated user from dir1 to dir2 using response.redirect I lose authentication information for the user and the user is being redirected to the login page. This issue was not coming up with each app (dir1 and dir2) were configured under subdomain, ex: [URL]
I have resolved the issue by adding a machine key to the machine.config file.
Our website has all of the publicly accessible pages at the root and private pages (login required) in a folder below the root (call it "private").Private pages are accessed as
www.oursite.com/private/somepage.aspx.I want to run the pages in the private folder in a separate application pool without changing the URL for private users.I tried making the private folder a virtual directory but then the pages in the private folder did not render(I think because it did not find a web.config in the private folder).Is the answer to simply put a copy of the web.config that resides at the root in the private folder or is that problematic?
I am creating virtual directory from my C# code when i execute this code working every finely.
But problem is when i publish this code and access through iis it is showing an error as access denied .
i tried to give permissions to the folder in c:\inetpub\wwwrootfoldername Network service and users provided permissions of full control But still showing an error of Access Denied(mine is iis 5.0 in xp)
I have static content like html,css javascript stored in DB. when a user requests for these i create a temp file in virtual directory and return the url. My web app is hosted on a IIS server. On some systems on creation of a file my IIS Application pool crashes and restarts. If i disable file-monitoring though the problem is resolved, but i dont have this luxury when i am deplying at the client end. Is there any way by which i can avoid app pool crash during file creation? If not is there any way by which i can serve static content like html, css, images, xml and js without creating temp files. I would need a generalized way of handling all these data types.
I want to allow each user to create a webpage on our domain. example: www.site.com/username
I've created a few pages that get content from database and place it in a folder. I want each user to be able to edit their own data and when they hit "submit". the system will then copy those pages to a folder and modify the code so it read from the right database.
I keep getting "virtual directory not being configured as an application in IIS" errors. Is there any way around this error? I want the process to be 100% automatic so that I don't need to manually go into the server and configure the IIS myself.
I have two applications(A,B) both are developed in .NET3.5 and used LDAP services.Application-A in one screen we are fetching users with role "project Leads" and it is taking 10 min time
Application-B in login screen we are checking user is authenticated or not and it is taking 20 sec
Both the applications are using the same service then way there is a time span problem. Please suggest me what can I do to improve performance of application A?
I am trying to access a wcf service hosted on a server running on a virtual machine on a windows 2008 R2 hyperv. When i access this service when running my asp.net website through code everything works fine how ever when i deploy the application on the local IIS , in the deployed mode i am getting an securityaccessdeined exception. My Asp.net app is running on a IIS server on another virtual machine. The stack trace is as given below :
Environment Info: My asp.net app has built on .NET 4.0 framework using VS2010. My WCF services are based on .NET2.0 framework. Event code: 3005
Event message: An unhandled exception has occurred.
I have a WCF service in a virtual directory that is called in the code behind of a page that is in the parent directory, when i debug the code i can see the wcf service is being called, however when the service calls Membership.GetUser() it alway returns null. The user has already logged in to the asp.net site. When i call the service via jquery it does pick up the correct user, but i need to be able to call it via the code behind as well. I am developing in .Net 3.5 how i can make the Wcf pick up the logged in user?
I made a web form on a development website of mine (we'll call it dev.somewhere.com) and tried to publish it out to the web (we'll call it [URL]) in a subfolder. I named it default.aspx like I was supposed to and it worked flawlessly on the dev site. When I published it out the web, I wound up getting the following error when trying to get to the subfolder: [URL] Directory Listing Denied
This Virtual Directory does not allow contents to be listed. Confused and flustered, I tried to go to [URL], but I wound up with some error that won't tell me the problem. Instead it tells me to change the my web.config to read <customErrors mode="Off"/>.
As virutal directory points to physical path of the application, so if the IIS root directory is C:inetpubwwwroot and the application is stored at D:websites, than we need to create a virtual directory but if the application content is placed at C:inetpubwwwroot, then why still need to create virtual directory.
I set up a Virtual Directory called 'Site'. I browse to [URL].In the source file, the relative paths are coded as '/Page1.aspx', for example, and it has worked in the past.I'm using Win XP Pro SP3 and IIS 5.1. Any ideas on what might be causing this behavior?
