I have a couple of servers and a load balancer. I want to show a server name which is currently serving the page.
I am using HttpContext.Current.Request.ServerVariables["SERVER_NAME"] and HttpContext.Current.Request.ServerVariables["LOCAL_ADDR"] but is shows the same data for all servers (load balancer information is shown but not the information about exact server name).
How to get a relevant information?
I have 3 servers where 1 of them serves as a load balancing server. In my ASPX page, I want to add a HTML comment to show the IP address or even host name of the server selected by the load balancer. I tried looking through IIS Server variables and tried using SERVER_NAME but that just returns the domain URL.
View 2 RepliesI'm creating web application behind load balancer. To this moment I configured it to store session in database but I'm not sure how should I handle session expiration. The problem is not sessions are not removed from database but Session_End event because I have to call some web service method in it.
Assuming Session_End is called when expires the thing I'm afraid of is situation when session is created on one server but finished on another. In this case I'm afraid Session_End on first server will be executed prematurely and I will call web service too early. What would you suggest in this situation?
Edit:
I remember some time ago reading about Sql Agent reacting to session end event and then performing custom code. Can anybody confirm that this solution is possible?
We are using Two servers for our application managed by a load balancer. One of which server contains Windows server 2003 & other one contains Windows server 2008. When a request is served by windows 2003 server and its subsequent goes to the other one (2008 server). Users gets log out. Are we need same Operating systems on both systems because( when request served by 2008, and subsequent on 2003 is served without any issue).
View 1 RepliesI have published a website and installed it on my local machine and it works fine, but when i install it on the both servers who controlled from the load balancer i got an error like the WebResource.axd not found. how can i resolve this problem? i have checked the IIS for axd mapping, the "Check that file exists" is unchecked for both servers.
View 2 RepliesWe host a SaaS application on 4 windows 2008 servers loadbalancer via a LVS. We use infragistics and Ajax Control Toolkit on several pages, one page represents a list of people using a Web Datagrid, each time a person is clicked in the list, an Ultra Web Tab component is updated at the botom of the page with detailed information on that person. After a certain amount of clics on different people (number of clics can be between 1 and 5) Scriptresource.axd craches with the following error :
[Code]....
I don't get this error when I run my application on one server using the server's private IP adress. I tried to synchronize the dates of the dlls System.Web and System.Web.Extensions on each server, I still get the same error.
I haven't deployed behind a load balancer before. My customer has a WCF service built and tested on servers using a service model configuration that is relatively straightforward. It provides a service to return an image of a map for another application. To get the map, it calls other services.
The service was built in Visual Studio 2010 targeting the 3.5 framework. The customer is using IIS 7.5 and an F5 load balancer. When moving to the production server, the Web.config was changed to add the load balancer behavior and specify the endpoint to show the physical and logical address of the service:
[Code].....
There was a problem when the service was deployed to a server behind the load balancer. When I try to call the service from WCFStorm or WebServiceStudio I get the message "The provided URI scheme 'https' is invalid; expected 'http'.
The endpoints for the service itself look right to me. However in the development and testing versions of the config, the client section uses http instead of http, while on the production servers it uses the load balancer's https address. This seems like it should be obvious, but we're missing it.
Our server operations team has asked the web development team (ASP.NET) to provide a URL in our application, which the load balancer can ping to perform health checks.
What should be executed on this page? I think we should attempt a database connection to ensure connectivity between the web and database.
One issue with ASP.NET apps is that they periodically reload themselves, causing a long delay and possibly timeout for users who hit the site during that time.
This may not be a problem for small websites, but it can represent significant downtime for high-traffic sites, if users happen to get routed to node in the web farm that is restarting.
Can load balancers somehow "know" if an ASP.NET application domain on a specific server is restarting? Then, they can route traffic around this server until the application has completed restarting.
Currently, I have my load balancer ping a simple .aspx page on the site. If there is a delay or the page fails to load, the host is taken out of rotation. Is it possible to do a more targeted health check, perhaps at the IIS level rather than ASP.NET level?
we have an web site access on PRODTEST Environment . We are facing an issue site works fine when we try to access the site using the Individual Server names (with Ip address).
View 2 RepliesI have a doubt regarding secure cookie.
I have four servers 2 App Server(behind firewall) and 2 webservers and each server is accessing through Load Balancer.
App Server is a modules for Data Access layer and webserver is for Presentation layer.
My Issue is My Load Balancer has Secure certificate installed but certificate is not installed on servers and I want to make cookie as secure in site , as per my understanding " cookie should be set as secure only for SSL site other ways new session will get create every time" so should I install SSL certificate on webserver to make my cookie as secure or will it work properly even if only Load Balance has SSL.
I have the following web farm setup in production server. Browser --> HTTPS --> Load Balancer --> HTTP --> webserver node F5 Load balancer handles off box SSL termination. It implies that SSL resides on F5 load balancer. Problem Statement: Ajax calls do not go through unless "Access data sources across domains" option is enabled in IE security settings.
I have the similar setup in staging server except F5 Load balancer. The ASP.Net application makes perfect AJAX calls on both HTTP and HTTPS. However, the staging server web farm use windows NLB and SSL resides on individual web server nodes
Can somebody explain what ASPXAuth cookie does?
My website uses forms auth and I am trying to create a load balancer (hardware) rule which will keep track of sessions based on the aspxauth cookie. Is it safe assume that the value of the cookie is unique?
i am trying to upload my site and no matter what i do,i keep getting the error -Could not load type 'myNamespace.fileName",the very first line of .aspx file?? My host says ,there is a problem in my code..i am not sure what am i suppose to change....i am using VS2005, .NET 2.0..everything works fine on local machine but not on host server. i am totally stuck on that after googling around
View 5 RepliesMy kind webhost (1and1) royally asked me to go elsewhere to do something like this.
I have 2 sites. One of them was developed by a .Net programmer. Now I am contracted to implement a PHP site and fetch data from the .Net site.
There is an ASP.Net form that a customer fills and when they hit submit, the data gets stored in SQL Server DB. How do I also store the same data in MySQL parallelly? I cannot directly use some database connectors with ASP.Net since MySQL connectivity is not supported on 1and1 Windows hosting (biz account, no less!).
What I thought of is to publish an RSS feed of entries in ASP.Net site and routinely scrape that data into MySQL on Linux host. It is an overkill, I know. Not efficient.
I have one IIS entry with AppPool integrated mode. There are 5 or more host headers assigned. The application pulls data based on the host name from Request.Url.Host. When I have 2 or more sites open at the same time the value of the Request.Url.Host is the same across all the sites. About every 30 seconds it resets itself to the correct value from the last request and shows that value on the other sites. So ultimately the sites are loading the same data. The value in the HOST server variable is incorrect as well.
View 1 RepliesMy application is running fine locally when I deploy it it is giving me the above error saying
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
how to check performance of sql server query with load ,also wants to create load by any tolls like load runner,if any url for download load runner or any other tolls by which we can create load please give me some idea related to it.
View 1 RepliesI am trying to create a progress bar for page load as it takes long to load. I need help to resolve jscript error 'null' is null or not an object on line $get("btn").click();
[Code]....
Control ctrl = new Control();
this.PlaceHolder1.Controls.Clear();
ctrl = Page.LoadControl("uc1.ascx");
ctrl.ID = "DynamicCtrl";
this.PlaceHolder1.Controls.Add(ctrl);
instead of using a control to load can we load a page .. like example.aspx
page mypage=new page();
mypage= Page.Load("example.aspx");
how to do this. as i am getting the erro
I have a update panel on the ASPX page,When thepage loads the content in the update panel shouldnot load ( Update panel should show the Updatepanel progress control) but after page load update panel contents should load . How do i get this efect.
View 3 Replieswe are creating a custom content management and out portal page is bit bulky it is about 60Kb without images.
and during loading the page in some browser we can see some parts of site load faster than the other parts of the site where as we want to indicate (or instruct the web server) to load some of the areas first then load rest of the page.
is there any particular setting in IIS for is there any particular method in classic asp for doing that?
also I have the same question in asp.net.
I'm developing my first Facebook application in ASP.NET 2.0 and doing a simplest thing, that is, to show a navigation on top with four hyperlinks where each link targets to another .aspx page. How can I do this using FBML in ASP.NET 2.0?
Otherwise coming to my question, where I'm struck after trying above thing at myself and failed then had to go around the Ajax way of doing this. Now I'm using Ajax call over the onclick event of each hyperlink from top navigation and it's succesfully loading external .aspx pages (for example,[URL]. The problem is when user comes on the application on first time, it only shows the .aspx page which has a navigation and a Ajax content place holder which is programmed to be filled with contents on click event.
How to load Ajax contents into the Ajax content place holder on page load without a click event?
I use a RadComboBox And use the code exactly as same as mentioned at the site
http://demos.telerik.com/aspnet-ajax/combobox/examples/populatingwithdata/autocompletesql/defaultcs.aspx
I use the code for "Server side" on the page mentioned in the above link.
However i am able to populate the values the first time the page is loaded but when i type in text it does not refine .Am i missing out on something ?
how i can load an panel(that contain for example Weather information) after page load
View 2 Replies
