Implications Of Conflicting Versions Of System.Web.Extensions?
Feb 23, 2010
One of the libraries I am including in my project makes use of System.Web.Extensions 3.5.0.0, which conflicts with my Framework 2.0 application, which uses (C:Program FilesMicrosoft ASP.NETASP.NET 2.0 AJAX Extensionsv1.0.61025System.Web.Extensions.dll). I can think of 3 possible solutions:
Ignore the warning and don't change anything. I am not sure what the application does to handle this.
Add an assembly binding element to my web.config (see below) Configure the application explicitly to use different assemblies (I think this is possible, but don't know how to do it).
However, I am unsure of the implications of each of these decisions. The application seems to work perfectly fine even when I ignore the warnings (solution 1), but ignoring warnings that I don't fully understand bugs me...as does having warnings like this show up at all.
[URL]
View 1 Replies
Similar Messages:
Feb 9, 2011
I downloaded MVC2 Futures and referenced it to my current MVC2 Project. However, if I want to call an HtmlHelper from MVC2 Futures I need to <%@ Import Namespace="Microsoft.Web.Mvc" %>
So I decided to add it on my Web.Config:
[code]....
but, this caused me errors. Could this assemblies co-exist? If yes, How?
View 1 Replies
Oct 11, 2010
i have installed ajax control kit successfully and all controls already came in toolbar tab named "Ajax Control toolkit"But when i try to design any page using with ajax control toolkit, follow error is coming:
Could not load type 'System.Web.UI.ScriptReferenceBase' from assembly 'System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.TypeLoadException: Could not load type 'System.Web.UI.ScriptReferenceBase' from assembly 'System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Source Error:[Code]....
Stack Trace: [Code]....
[TypeLoadException: Could not load type 'System.Web.UI.ScriptReferenceBase' from assembly 'System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.]
AjaxControlToolkit.ToolkitScriptManager.OnResolveScriptReference(ScriptReferenceEventArgs e) in [code]...
I am using VIsual Studio 2008 , framework 3.5 but i don't know why in error information version is showing 2.0
i install tool kit according 3.5 framework.also note, framework built-in ajax tags i can use fine and they work properly.
View 1 Replies
Dec 15, 2010
i have installed ajaxtoolkit 3.5 but when i debug i am getting this error Could not load type 'System.Web.UI.ScriptReferenceBase' from assembly 'System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' even i have changed my tags to
<asp:ToolkitScriptManager
ID="ToolkitScriptManager1"
EnablePartialRendering="true"
runat="server"></asp:ToolkitScriptManager>
View 6 Replies
Jan 27, 2011
We are working on a web application and the target deployment includes Windows 2003 64-bit. When we run the application on the 64-bit OS, it gives the following error:
The entry 'asp:System.Web.UI:System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' has already been added
The web.config file includes the following:
<pages validateRequest="false" enableEventValidation="false" viewStateEncryptionMode="Never" theme="esl_theme">
<controls>
<add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>
</controls>
</pages>
And if we remove the line <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>, it seems to work.
Can somebody understand the problem and take corrective action? The application does not compile on 32-bit OS without this.
View 1 Replies
May 13, 2010
I'm using a content management system whose admin interface uses MVC 1.0. I would like to build the public parts of the site using MVC 2.
If I just reference System.Web.Mvc version 2 in my project the admin mode doesn't work as the reference to System.Web.Mvc.ViewPage created by the views in the admin interface is ambiguous:
The type 'System.Web.Mvc.ViewPage' is ambiguous: it could come from assembly 'C:WindowsassemblyGAC_MSILSystem.Web.Mvc2.0.0.0__31bf3856ad364e35System.Web.Mvc.dll' or from assembly 'C:WindowsassemblyGAC_MSILSystem.Web.Mvc1.0.0.0__31bf3856ad364e35System.Web.Mvc.dll'. Please specify the assembly explicitly in the type name.
I could easily work around this by using binding redirects to specify that MVC 2 should always be used. Unfortunately the content management systems admin mode isn't compatible with MVC 2. I'm not exactly sure why, but I start getting a bunch of null reference exceptions in some of it's actions when I try it and the developers of the CMS have confirmed that it isn't compatible with MVC 2 (yet).
The admin interface which is accessed through domain.com/admin is not physically located in webroot/admin but in the program files folder on the server and domain.com/admin is instead routed there using a virtual path provider. Therefor, putting a separate web.config file in the admin folder to specify a different version of System.Web.Mvc for that part of the site isn't an option as that won't fly when using shared hosting.
Perhaps it's possible to specify that for some assemblies a different version of a referenced assembly should be used?
View 1 Replies
Feb 15, 2010
By default ASP.NET 3.5 Web App project has references to assemblies System.Data.DataSetExtensions.dll and System.Web.Extensions.dll.
With System.Data.DataSetExtensions everything is clear for me, it contains such useful extension methods as DataTable.AsEnumerable() and DataTable.CopyToDataTable().
And what about System.Web.Extensions.dll? What useful members could you mention to use?
View 4 Replies
Aug 26, 2010
I moved a site to another server, it worked fine for a a while, but then crashed. I figured out that System.Web.Extensions.dll was missing, so I copied it again. After a while it was missing again. Using Process Monitor I figured out that IIS (w3wp.exe) deletes the file soon after I copy it to the bin folder. (CreateFile with "Read Attributes, Delete" access.)
View 1 Replies
Jun 4, 2010
I downloaded and installed the AjaxControlToolkit.Binary.NET35.zip.I added Accordion, and add Accordion panels. Building the web site always fails. There are several error messages, like, Type 'AjaxControlToolkit.Accordion' does not have a public property named 'AccordionPane'. I checked the web.config file there are two different versions of System.Web.Extensions and System.Web.Extensions.Design.One is version 3.5 and another is 1.0 See the copy followed,
<add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.Web.Extensions.Design, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
[code]...
View 5 Replies
Jul 8, 2010
I purchased a new computer and put all my development software on. Now when I load an asp.net 2.0 project I get the following error:-
Code:
Error3E:RPPResolve-ITASPDotNET2.0HansooKwanDirections.aspx: ASP.NET runtime error: Could not load file or assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified. (E:RPPResolve-ITASPDotNET2.0HansooKwanweb.config line 44)E:RPPResolve-ITASPDotNET2.0HansooKwanDirections.aspx11E:...HansooKwan
View 9 Replies
Mar 18, 2010
I'm having trouble moving a website from one server to another. It seems to be a problem loading multiple versions of System.Web.Extensions. The code uses version 3.5 in most places but a third party control appears to be needing version 1.0.6. I didn't think this was possible but it appears to be working in it's current situation.
Is there a way I can use the GAC version of System.Web.Extensions for the site but import a dll of version 1.0.6 just for these controls?
View 1 Replies
Mar 15, 2011
Server Error in '/IMGcup' Application.
Configuration Error
Description: An error occurred during
the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The
system cannot find the file specified.
Source Error:
[Code]....
Source File: C:inetpubwwwrootIMGcupweb.config Line: 24 Assembly Load Trace: The following information can be helpful to determine why the assembly 'System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' could not be loaded.
[Code]....
View 3 Replies
Jun 10, 2010
I installed the app http://and when I ran the default page I get the error below:From my research they ask you to copy the DLLs into your bin folder and I did and still would not work.I see the DLLs at C:WINDOWSassembly folder.Where am I supposed to have the DLLs? what is the best practice? The log clearly shows it is looking for LOG: Initial PrivatePath = C:InetpubwwwrootPTIssueTracker2.5in after I enabled the Fusion log registry.i found the DLLs at C:Program FilesReference AssembliesMicrosoftFrameworkv3.5. Below is the error:
Configuration Error
Description:
An error occurred during the processing of a configuration file required to service this request.
Parser Error Message: Could not load file or assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Source Error:
[Code]....
Source File: C:InetpubwwwrootPTIssueTracker2.5web.config Line: 80 Assembly Load Trace: The following information can be helpful to determine why the assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' could not be loaded.
[Code]....
If I copy the DLLs from C:Program FilesReference AssembliesMicrosoftFrameworkv3.5
into C:InetpubwwwrootPTIssueTracker2.5in, I get the error below:
Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference.
(Exception from HRESULT: 0x80131040)
View 1 Replies
Apr 23, 2010
I have an ASP.NET project and I want to use some AjaxToolKit Extenders on my pages.
The site is created in VS2010, set to Framework 4.0.
This is what I did:
1) Add reference "AjaxToolKit.dll" to my project.
2) Add to the toolbar the same file for the controls
3) Add "ToolkitScriptManager" to the page source.
This adds the declaration to the source as well.
Right after this I get the following error:
Reference required to assembly 'System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' containing the base class 'System.Web.UI.ScriptManager'. Add one to your project.
View 3 Replies
Jun 8, 2010
I am running a 4.0 environment on my development machine (VS 2010 + .NET4) and my server (2008 SERVER + just installed .NET 40). On my dev environment, I don't get any errors, but with the same web config on the server, I get: Error 500.19 - The configuration section 'system.web.extensions' cannot be read because it is missing a section declaration
[code]...
View 4 Replies
Jul 27, 2010
Now I have WCF web.config problem. At first, I have parent website .net 2.0 "WebApp" which use "system.web.extensions" assembly.
<configuration>
configSections>
sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
[code]...
View 3 Replies
Mar 15, 2011
Server Error in '/IMGcup' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Source Error: [Code]....
Source File: C:inetpubwwwrootIMGcupweb.config Line: 24 Assembly Load Trace: The following information can be helpful to determine why the assembly 'System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' could not be loaded.
[Code]....
View 1 Replies
Aug 12, 2010
I'm trying to read the value in the web.config file for the <jsonSerialization /> element. Here's an example showing where it appears:
<configuration> <system.web.extensions> <scripting> <webServices> <jsonSerialization maxJsonLength="500000"/> </webServices> </scripting> </system.web.extensions></configuration>
So, here's what I did to try and get the value:
[Code]....
But it turns out that the OpenWebConfiguration(null) method call is returning the global web.config file, whereas I want the web.config file for this particular site. If I hard-code in the path to this particular site, then it works--but then my code isn't portable. There must be a way to open the web.config file for the particular site that the code is hosted on--isn't there? Could somebody point me in the right direction?nd, if there's another way I should go about trying to get the maxJsonLength attribute out of the web.config, let me know. I can't just instantiate a JavaScriptSerializer object and inspect the MaxJsonLength property, I already thought of that :-)
View 2 Replies
Jun 22, 2010
I am trying to create an MVC2 web application that will run both on my local development machine (on localhost), and on our central webserver.
Development machine:
Windows 7 Professional, 64bitVisual Studio 2010 (beta)ASP.NET 4.0IIS 7.5
Webserver:
Windows Server 2003 SP2ASP.NET 3.5 SP1 (determined by checking the folders under %SystemRoot%Microsoft.NETFramework)IIS 6.0
Everything works fine when debugging from VS, and I've finally gotten so far that it also works copied to the webserver. However, when I try to copy it to my own local webserver, I get the following error message:
Error Summary
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
View 7 Replies
Aug 2, 2010
On attempting to deploy a .net 3.5 website on the default app pool in IIS7 having the framework section set to 4.0, I get the following error.There is a duplicate 'system.web.extensions/scripting/scriptResourceHandler' section defined.Commenting off the offending lines didnt help either.
View 2 Replies
Jan 4, 2010
I'm getting ' Could not load file or assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral,PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.' when dragging AJAX Extention to any page.I've been uninstalling and reinstalling VS2005 whole day. Meanwhile there are no AJAX Control Toolkit in Toolbox and AJAX enabled templetes are missing.
View 5 Replies
Sep 3, 2010
I have written my ASP.NET web site code in Visual Studio 2008. When I'm uploading it to the remote server I'm getting an error message about a problem in the web configuration file:
Section or group name 'system.web.extensions' is already defined.Updates to this may occur at the configuration level where it is defined.What is the reason for this error?
View 1 Replies
Jan 28, 2011
I had web application developed in VS 2005 + Sql server 2005 + Ajax 1.0 Extension . (Developed in Windows Server 2005) Now i am migrating to VS 2008.(Windows Server 2008 + Sql server 2008)
After opening and compile my Existing application in VS 2008,i am getting error.
Errors :-
Unable to load file or assembly 'System.web.Extenstions'' version=1.0.61025. (I think it because of AJAX Extension version.So i installed AJAX Extension 1.0 but it will give me ambiguous error so i uninstalled.I am added reference for version=3.5.0 but again unsuccessful.) What i will do now? Also i used 'Microsoft.SqlServer.SmoEnum', Version=9.0.242.0 in VS 2005. (Are i have to change it to version=10.0.0.0? by adding reference to new version.) I also used crystal report.(Is there is anything to do with it?)
View 1 Replies
May 29, 2010
I'm working on my ASP Application 2.0 framework with AJAX Extension 1.0 installed on my pc. I'm getting an error on my CrystalReportViewer:Could not load file or assembly 'System.Web.Extensions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)" I already tried some solutions I found in google but it's still im getting the error.:
[URL]Below are the codes for my web.config
[Code]....
Here's my code in the webform
[Code]....
View 2 Replies
Apr 14, 2010
I upgraded our Web App from VS2005 to VS2010 but is Framework 3.5 and Ajax 3.5.
I had some issues but managed to resolved most.
The last issue is it is not building.
I originally had a referrence to - System.Web.Extensions, Version=1.0.61025.0 which caused the app to crash but it built fine.
When I changed - System.Web.Extensions, Version=3.5.0.0, it refuses to build as it cannot find a custom control within the ajax control toolkit - tab panel.
It's the wierdiest thing, when I change back to 1.0.61025.0 it works but as soon as I go to 3.5.0.0 it can't find control "mnuCBO".
Also tried changing tagprefix in the webconfig but that also didn't help.
Maybe it a little thing or something silly that someone else has experienced.
I have included some parts of code from my master page.
[Code]....
Web Config
[Code]....
View 4 Replies