i have one application that is deployed in IIS at Remote Desktop. if i access that application from local system i am getting "Internet explorer cannot display the webpage" and it is running fine in Remote Desktop but not in Local system.
View 2 RepliesI have a problem.when i create a new web site and browse it with IE8 ,there is error(Internet Explorer cannot display the webpage) and now i am working with VS2008 and IE8.but i also have an older version of VS(VS2005) on the same computer.when i created a new web page with 2005 ,there is no problem and everything is ok. what is the problem with VS2008??i uninstalled it and reinstalled.but there is same error.i tried VS2008 on the another computer and i had no problem.
View 2 RepliesI'm trying to publish my page and received this error when open it:
[Code]....
When I browse it in the development environment using Microsoft Web Developer 2005 it view just fine. I then copy all my files & put in C:Inetpubwwwroot and open IE to view it, the above error showed up. In IE8|Tools|Internet Options|Advance, I uncheck "Show Friendly Http Error Msgs" in hoping that it'll show me something more than the basic error, but I'm not getting much more.
I just was issued a new PC that has Win7 (non-64 bit). We use SVN as our source control, and I pulled all the web projects down to the new machine. After configuring IIS, I compiled one project and ran. Almost immediately I get the error "Internet Explorer cannot display the webpage". I ran the diagnostics, and get the message "The remote device or resource won't accept the connection". Looking in the event viewer, nothing showed up. I had this running on a Vista Ultimate box, and even did a one to one compare of the settings between the two boxes, and things are the same, but obviously I've missed something. Any thoughts on what to investigate? How can I see a better message than the standard (already turned off Friendly Messages)?
View 3 RepliesI have a page with two data bound list box controls on it. When I there is data in the controls the page crashes and i get "Internet Explorer cannot display the webpage". I have tried to set break points to see what is going on. I have tries to fill the boxes in the code behind instead of using a data source in the page. I have tried setting the page time out to 3 minutes. Nothing is working and I'm not sure what the problem is. The page works fine as long as there is no data in the controls. I'm trying to figure out what I am missing.
Attached Files CodeProblem.txt (40.3 KB, 35 views) Frinavale EMM Join Date: Oct 2006 Location: Canada
Posts: 6,545
#2:
Dec 9 '10
Listbox causes page to Crash getting "Internet Explorer cannot display the webpage" Instead of posting your entire code for us to review, could you post the specific portion of the code that you think is causing the problem (probably the retrieval or setting of the data).
I used to use VS 2010 and Windows 7 32 bit editions. Now I have upgraded to 64 bit editions.My problem is that every time I run my webform website, development server is set up and when I stop debugging it is closed.On 32 bit versions it was launched just once. Now every time I hit F5.Problem is that many times IE just displays Internet Explorer cannot display the webpageif I press F5 (refresh) once or twice website is displayed.What can I do with it? Other browsers wait until that development server is launched, just IE doesn`t
View 1 RepliesI have a FileUpload and a button, when I click the button to save the file to webserver, but It does not work (no error messages) and the browser appears message: Internet Explorer cannot display the webpage. (The same thing with Firefox)Here's my code snippet:
[Code]....
and cs file:
[Code]....
I marked the point at Button1_Click to debug, but it does not work.
I have a website1 that works. I created a new website2. I went to windows explorer and copied website1 folders and files to website2 directory. I created aspnetdb in website1 using the membership provider service. I detached it from website1 and attached it to website2. When I run website2 in debug, I get message "Internet Explorer cannot display the webpage".
View 2 Repliesisn't there any way except setting the website as an application in IIS??because i want to create it in filesystem.thare are lots of links andi i almost all of them but i'm confused and it doesn't work.
View 2 RepliesI used a ASP Image control using Visual Studio 2008 and defined the URL to the JPG picture as in :
asp:Image ID="Image1" runat="server" ImageUrl="~/App_Data/Stone Forest 2.jpg"
style="z-index: 1; left: 368px; top: 290px; position: absolute; height: 307px; width: 537px" />
When VS debugging view on the .aspx page on Internet Explorer 8, I don't see the picture except for a blank Image control box outline and at the top left corner, a symbol "X" in a square box was displayed. Is there some settings to do with IE8 or Visual Studio 2008 ?
when i test this page http://www.catalogues4u.com.au/ViewCategory.aspx?catID=119 im getting the above error. to replicate this issue visit the above page in ie7 and you will get the prompt.
View 3 Replies i want to close internet explorer on if a button is closed which i can do with this code
Page.ClientScript.RegisterClientScriptBlock(Me.GetType, "jcrCallerID", "window.close();", True)
this code is working fine for me but it is also coming up with warning which i dont want.
The warning is saying the webpage is trying to close do you want to continue closing the webpage yes /no
I want to avoide this warning and just close the browser windows.
How can I add an URL to the trusted site? It seems that there are stored in the registry, but where exactly?
The .net programm will run locally on each client.
Edit clarification: I want to do this programmaticly running C# code.
I am developing an ASP.NET 4.0 web application in which I am trying to use an iframe to load a third party website:
<iframe id="ifr1" src="http://newdomain.com?id=test&password=123"
width="100%" height="600px">
</iframe>
The newdomain.com is trying to place cookies in the browser and IE dosent like that. I have no control over the application hosted on the newdomain.com. I have read a lot of articles which talk about having a P3P information added to the header of the page which hosts the iframe. So in my application's Global.asax I have the following code:
protected void Application_BeginRequest(object sender, EventArgs e)
{
HttpContext.Current.Response.AddHeader("p3p", "CP="IDC DSP COR ADM DEVi TAIi PSA PSD IVAi IVDi CONi HIS OUR IND CNT"");
}
But this doesn't work and I am really confused now.
I'm just trying to sent a .wav file to Internet Explorer with an ASP.net Handler:
public void ProcessRequest(HttpContext context){ HttpResponse response = context.Response; response.ContentType = "audio/x-wav"; response.WriteFile("MyWav.wav"); response.AddHeader("Content-Length", "304578"); response.Flush();}
This works for Firefox and Chrome but I'm just presented with a blank screen in Internet Explorer. Why? (I've tried setting the "Content-Disposition" header. If I set it to "attachment" I am presented with the download dialog. If I set it to "inline", I just get a blank page like before. I want the wav file to play inline like here: [URL]
I am trying to write an app in asp for users that will run in the browser but not look like a browser so I want it to open without all the toolbars. So it should be just the Title bar then the page. We will create a shortcut to the page on the users desktops. Is there a way to do this?
View 3 Repliesi want to install firebug on IE.can you give me the links for free download of firebug
View 4 RepliesI am currently write an ASP.NET WebApplication in Visual Studio 2010. My default browser is Firefox. If I start an WebApplication, the WebApplication starts up in the same instance of Firefox. How is it possible to avoid it? How do I configure Visual Studio that the WebApplicaton starts in an new instance of Internet Explorer?
View 2 RepliesI am currently building a web project in which I would like to allow the user to navigate using either the back/forward button I created or the back and forward buttons in Internet Explorer to navigate my project.
View 1 Repliesi have created kiosk application in asp.net and i just want to hide address bar and internet explorer menus.
View 2 RepliesI have developed some aspx pages using visual studio 2008. I am authenticating using Active Directory services. I have kept a link button on my aspx page which says signout .What exactly i want to do is that i want the back button of my login page to be disabled so that when i press signout and when my login page loads users cant go back and thus forced to enter the login details. I am using c# as development language.
View 7 Replieswell actually i dont know really if this is MVC or not but I run this on MVC so i would run it here.I got a HUGE .js file , which run smoothly on Firefox , but internet explorer read like half of him (he makes some actions , some not)
also he doenst run alert("bla"); when i put it on him.other then that, when i copy and past the code to the head of the asp.net mvc view , it runs smoothly
here is my import from the head
<script src="Scripts/AppScripts/TestsAdministrator.js" type="text/javascript"></script> (also tried to do this with resolveURL);
and here is the function which some part of it doenst work (i wont type all the code unless you really want)
//Ajax - Drop down list event
$("#TestList").change(function () { [code]....
I have converted a table as an xml string that looks something like
<NewDataSet>
<officelist>
<OfficeID>2176</OfficeID>
<Office>My Office </Office>
<Region>Toronto</Region>
<Division>TO </Division>
How do I get this to a strict xml page where you can open and close the nodes (in IE) -like this xml feed
we want to have a button on the page of our internet explorer that saves the flash that is displayed/loaded in the browser window. A saving dialogue after pressing the button would be great.
View 5 RepliesI currently developing a ASP.NET web application.
The application is designed for Google Chrome. I would like to pop out IE when printing is involved because Chrome lack preview etc. at a button click the IE should open. Here's the code:
protected void btn_print_Click(object sender, EventArgs e)
{
System.Diagnostics.Process.Start("http://localhost/storeapp/printpage.aspx?orderno=" + Request.QueryString["orderno"].ToString() + "");
}
Here I have passed a particular orderno to the URL. But when I click nothing happens. I have set IE as default web browser. Why is this?