JQuery :: Alert Popup Only Happening Once?
Sep 6, 2010[Code]....
Alert Popup only happening once
[Code]....
Alert Popup only happening once
I produce a popup window by adding a hyperlink to a table cell dynamically in my vb.net code behind. Here is the code:
Dim sHyperlink As
String =
"<a href=""LabPopup.aspx?RefNo=" & iLabRefNo &
""" target=""_blank"">" & strValue &
"</a>" objCellValue.Controls.Add(New LiteralControl(sHyperlink))
So on my web page, I will have a list of these hyperlinks and each have a different iLabRefNo. When I click on one of these links, the popup window does appear correctly.
I have a button on the popup window that closes the popup. But I get this message in an alert box when click on my button:
The webpage you are viewing is trying to close the window. Do you want to close the window?
If I click OK then the window close. But I just want to close the popup wondow without this message. What do I need to do?
Here is my code for the button to close the popup:
<asp:Button
ID="cmdLabPopupClose"
runat="server"
Text="Close"
OnClientClick="CloseWindow()"
/>
<script type="text/javascript">
function CloseWindow() {
window.close();
}
</script>
I have 1 aspx page with code behind. In this I have 1 button where I am using OnClick = "btnOk_Click" event. Now here I am testing some validation I want to give a alert/popup if validation failes. I know I can display message using Response.Write, but my user wants to display an alert.
View 7 RepliesI'm tring to write a function that need to save a file (in csv) and has a condition.
it's something like that:
If the file is small then 1MB then I want to pop up an alert in javascript and then continue with the save as file commands.
What I did was:
if(...)
{
}
else
{
ClientScript.RegisterStartupScriptBlock(...alert('aaa')...);
}
Response.ContentType = "text/csv";
Response.AppendHeader("Content-Disposition","attachment; filename=file.csv");
Response.TransmitFile("FILE.csv");
Response.End();
the save as works fine. but the alert wont popup in the else case. I tried RegisterStartupScript. I tried many options. But it seems that the response.end is stops the clientscript from happening.
I am writing in c# asp.net (ajax enabled website, but not in use), visual studio 2005.
I am using jquery-impromptu within my gridviews to display a confirmation box when the user clicks delete which works fine. However, I want be able to do the same with my ListView for which I have the following code:
<asp:ListView ID="lvAlbums" runat="server" GroupItemCount="15" DataKeyNames="album_id">
<LayoutTemplate>
<table id="groupPlaceholderContainer" runat="server" border="0" cellpadding="0" cellspacing="0"
style="border-collapse: collapse; width: 100%;">
<tr id="groupPlaceholder" runat="server">
[Code]....
I am working on a ASP.NET website that needs popups in a modal window similar to JS confirm and alert. How would I do this on client and/or server side?
View 2 RepliesI am trying to make a Javascript Alert appear when someone clicks on a textbox that is part of a Gridview. the textbox is an Item template and I have an onclick="NotePopup()" in the TextBox properties. I am having trouble grabbing the correct ID of the text box, because it is nested inside a gridview. I have been looking around on Google for a solution but none of the responses are working for me. The gridview will have multiple rows, so each textbox that could potentially be clicked will have a different ID, is there any way to pass the correct ID to the Javascript, or have the Javascript function grab the correct ID?
I did use
var Control = '<%= GridView1.ClientID %>';
then cut and paste the ID from ViewSource of a textbox and append it to the Control Variable, to test out the popup and it does work
is there any way to show a good look alert with title using Jquery?
View 3 Repliesany modal popup controls whereas I can interact with the controls, causing callbacks and asynchronous calls without losing the popup.
I tried with the modalpopupextender, but the popup will disappear with the call and re-rendering the popup like many people will cause massive flashes of the popup which i want to try and avoid.
I was reading on some tutorials online for doing basic jquery. I've been trying to do a simple alert box, however i am getting the basic/standard alert basic, rather than the fancy jquery
<%@ Page Language="C#" %>
<%@ Import Namespace="System.Web.Services" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
[URL]>
<html >
<head id="Head2" runat="server">
<title>Asp.net JQUERY</title>
<script type="text/javascript" src="Scripts/jquery-1.4.4.js">
</script>
<script type="text/javascript">
$(document).ready(function() {
// add code here
});
</script>
<script type="text/javascript">
$(document).ready(function() {
$("#Button1").click(function() {
alert("Hello world!");
});
});
</script>
</head>
<body>
<form id="form2" runat="server">
<asp:Button ID="Button1" runat="server" Text="Button" />
</form>
</body>
</html>
I have a button on my asp.net page and I am using ajax jquery to create a mouseover effect.I want to show alert on mouse over. How can i do this ?
View 2 Repliesi have a certain dates that come from database and want to block those dates from selecting, how would i do that? like Alert when certain days are clicked on the jquery datepicker?
i am using asp.net C#. and pass the dates from server side to client?
I am working on a portal wich is hosted in Sharepoint 2007. I need to come up with a widget that will display certain messages. The widget to be visible from all pages of the portal. I would like something like the StackOverflow has for notifications of your score/badges with displaying it up on top of every page. Is there a ready solution out there (jQuery/Ajax) that can be used?
View 1 RepliesI m working on JQuery,
I have one UserControl in that I have taken one button(it is present inside an updatePanel).
when i m clicking on button on that time i want to show alert from server side for that i have written-
[Code]....
But it is not working, if i m removing updatePanel then it is working.
I'm using some JS to show some divs.The divs' content is set up in a MultiView control in the server. Depending on certain parameters, I trigger some postbacks to make the server select the appropriate view. The problem is that everything works if I keep the alert(1); below, but stops working if I remove it.
Here is the code. I have a button which its OnClick() calls ShowEditor(), with an element and a type. ShowEditor() makes the editor's div visible after raising a postback to let the server select the correct view in the MultiView based on the type. This works fine. The editor loads and there is a div inside (vwText_Text1) which I'd like to assign an OnClick event to. This only works if the alert() is present.
[code].....
I have a custom control, that has takes some information from user and submit to the database. it is working fine in normal aspx pages. but when i display that custom user control in jQuery modal popup. The events does not fire or lets say the data is not submitted to the database.
View 3 Replies<head runat="server">
<title></title>
<style type="text/css">
BODY, HTML
{
padding: 0px;
margin: 0px;
}
[Code] ....
My GridView is as follows
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" CellPadding="4"
ForeColor="#333333" OnRowEditing="GridView1_RowEditing" OnRowCancelingEdit="GridView1_RowCancelingEdit"
OnRowUpdating="GridView1_RowUpdating" OnRowDeleting="GridView1_RowDeleting" Width="574px">
<RowStyle BackColor="#EFF3FB" />
<Columns>
<asp:TemplateField HeaderText="ID">
[Code] ....
But I am unable to get the required alert ...
I am using alerts from this site [URL] ....
I have a datalist
<asp:DataList ID="ddlist_rooms" runat="server" RepeatColumns="1" RepeatLayout="Table">
<ItemTemplate>
<div>
<h3><span class="roomtype"><%# Eval("room_type") %></span>
</h3> </div>
<div><span class="rid" style="visibility: hidden"><%# Eval("id") %></span></div>
[Code] ...
In the above structure room information has been loaded now when I click on book now then I want to access the roomid room price to send it next panel.
I just want to know that how it is possible to access other values using jquery...
I have asp.net button and I want to create a QUnit test that will first create mouseover and then show an alert. How to do this. I tried
test("mouseover",function(){
$("#buttonid").mouseover(function () {
alert('mouseover');
test(true,"Done");
});
});
but it doesnt work.
I m passing Id from one page to another other page using querystring string. At first time it is displaying data in datalist in 2nd page on basis of selected Id. But again on home page while clicking on other image then previous record is showing. At second time, page load is not happening while testing using break point.
What is the error.? There is also AutoEventWireup="true".
in my asp.net application i want to open a popup and load gridview with data when i click a button control how do i open a popup using css and jqquery or any other way
View 4 RepliesNOTE: I have an aspx ASPX page which is rendered from a SiteMap. 1st time the POSTBACK happens, but subsequently in same sessions, POSTBACK does not get fired.
HACK (not working) - I have the refresh meta tag like this inside the HTML tag
<html>
<head id="Head1" runat="server">
<META HTTP-EQUIV="Refresh" CONTENT="2">
<link rel="Stylesheet" type="text/css" href="~/Main.css" id="style"/>
</head>
</html>
When I am visiting this ASPX page, I want this META tag to be called only ONCE. So, I was trying the following code in OnLoadComplete event ?- HtmlMeta meta = new HtmlMeta();
HtmlHead head = (HtmlHead)Page.Header;
head.Controls.RemoveAt(0);
I need to show a popup as a video using jquery.
the vedio is a html page itself. i need to call this page inside a div or panel of another page on this page i need to provide popup
for ex:
page1.html has the video( this vedio run in flv-flayer)
page2. i have code as follows
<body>
<center>
<div id="button"><input type="submit" value="watch the video" /></div>
</center>
<div id="popupContent">
<a id="popupContactClose">x</a>
<h1>vedio</h1>
<div ></div>
</div>
<div id="backgroundPopup"></div>
</body>
by clicking watch the video in page to i can get pop up it is ok... but how can i include html page - page1.html in to that pop up using JQUERY.
i mean there shold be a way to include this vedio in div of that page 2
i want to open attractive new window using jquery,
View 6 RepliesI am using ASP.Net and jQuery + jQuery UI. Everything works fine with the jQuery on any other page, however when I create a popup window with window.open(...) jQuery seems to no longer function.
I have all of the script files included on the Popup's Master page, so am not sure why it won't fire.