I have a website running on Vista with IIS 7. I call a webservice from the client script code and I always get the error that my service is not defined.
The same website works right when running from web developer server of visual studio.
[Code]....
I created an ASP.NET REST service (using WCF) and access it through one of my .aspx page. the problem is that when I publish (precomile) my code to the web server, I get an error :
"ThunServ not defined" in the Javascript console of my browser.
don't know what's causing it and how to solve it.
I have a web application that built on using VS2005 running under an XP operating system. Recently the computer was upgraded to Vista. After installing VS2005 and all pages, pressing the RUN button throws an error where the start page is "forbidden". I have replaced the page with a test page named "Test.asp" that merely says hello, and that does not display (access is forbidden). I haven't a clue. I am an administrator on the machine. Does anyone know what this problem is?
View 6 RepliesI can't seem to get the mvc 2 to install. I have a copy of visual studio 2008 already installed and working. I'm using vista ultimate 32-bit and I've ran it normally just by double clicking it and also by doing a run as administrator. Both fail with the same log entries. It always exits with code 1603.Here's the bottom portion of the install.log file:
'Microsoft ASP.NET MVC 2' RunCheck result: Install Needed Verifying file integrity of :UsersglenAppDataLocalTempVSD1766.tmpMvcRuntimeAspNetMVC2.msi WinVerifyTrust returned 0 File trusted Installing using command 'C:Windowssystem32msiexec.exe' and parameters ' -"C:UsersglenAppDataLocalTempVSD1766.tmpMvcRuntimeAspNetMVC2.msi" -q ' Will attempt to elevate process. Process exited with code 1603 Status of package 'Microsoft ASP.NET MVC 2' after install is 'InstallFailed' Status of package 'Microsoft ASP.NET MVC 2 - Visual Studio 2008 Tools' after install is 'InstallNeeded'
I am creating an application that uses jQuery to make ajax calls to ASP.NET WCF Web Service. Everything works fine most of the time but eventually (about twice per week) the service stops working with the error below. The only solution is to clear the ASP.NET Temporary Files. The problem seems to start by the time the application pool recycles but not on each recycle. Please help as I'm trying to figure this out for weeks now!
WebHost failed to process a request.
Sender Information:
System.ServiceModel.ServiceHostingEnvironment+HostingManager/6957828
Exception:
System.ServiceModel.ServiceActivationException:
The service '/Chat2/Chat.svc' cannot be activated due to an exception during compilation. The exception message is: Could not load file or assembly 'App_Web_vpupi5wr,
Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.. --->
System.IO.FileNotFoundException: Could not load file or assembly'App_Web_vpupi5wr, Version=0.0.0.0,Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
When I'm accessing web service from jquery, I'm getting the 403 forbidden error.. I published and created in the virtual directory too. Wat's the cause of this error and how to rectify it? I've added the webservice in the same solution.. This is my following code..
$(document).ready(function() {
$("#sayHelloButton").click(function(event){
$.ajax({ [code]....
I suppose using that url path for webservice is wrong.. I used the path 'DummyWebservice.asmx'. There I'm getting the 500 internal server error.
I have this method in asp.net ajax enabled mvc service
[OperationContract]
public TestRun GetTestSuite(string testSuitName) {
TestRun testRun =
AdapterFactory.CreateTestRunAdapter().GetByTestSuiteName("testSuit");
return testRun;
}
Where TestRun is Created using entities framework against TestRun table. I am using following ajax method
function getTestSuite() {
$.ajax({
type: "POST",
url: "Services/TestRunService.svc/GetTestSuite",
data: '{"testSuitName" : "' + testSuiteName + '"}',
contentType: "application/json; charset=utf-8",
dataType: "json",
success: function (response) {
},
//If the call fails
error: function (xhr, textStatus, errorThrown) {
alert(errorThrown);
}
})
}
I get undefined error. If I return string from service it works. Do I need to change dataType: "json" to something else?
I am a Wed Developer setting up a Vista Home Premium SP2 laptop machine to use for a particular asp.net project. I get the following error when running the application:Unable to make the session state request to the session state server. Please ensure that the ASP.NET State service is started and that the client and server ports are the same. If the server is on a remote machine, please ensure that it accepts remote requests by checking the value of KEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesaspnet_stateParametersAllowRemoteConnection. If the server is on the local machine, and if the before mentioned registry value does not exist or is set to 0, then the state server connection string must use either 'localhost' or '127.0.0.1' as the server name.After a lot of researching I understand the asp.net state service needs to be running. Only problem is it is nowhere to be found in my Services list! Does anybody know how it install it,I am running:Windows Vista Home Premium SP2
IIS7 SQL EXPRESS .NET Framework v4.0.30319_X86
My laptop is running Windows Vista. I recently upgraded it to Windows Vista SP2 and I am trying to install .Net Framework 3.5 on my laptop and whenever I try to install .Net Framework 3.5 I get the following error (error code - 1603):-
54] Microsoft .NET Framework 3.5 'package': [2] Error: Installation failed for component Microsoft .NET Framework 3.5 'package'.
MSI returned error code 1603
[07/20/10,23:05:11] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.5 'package' is not installed.
[URL] I created an AJAX-enabled WCF service to call from a web form. the thing is that after creating it, I'm able to populate my dropdown from the items returned by the service.
but 2 hours later, I get this FireFox error message when loading the page :
"Error: Sys.ArgumentException: Value must not be null for Controls and Behaviors.
Parameter name: element
Source File: http://localhost:50403/ThunderWeb2 /ScriptResource.axd?d=Htwz5SPOGy46DsuOfFL3pQa8Lr5_3hMVD_cps_d3FYg4iWXeG_0-3bdA95LxuQtbXGUXoHUpV1SV8q4FusAyWjJpsaLk2b6TFO_NfpB_3ro1&t=ffffffffbb99ee49
Line: 2710"
and also this :
Error: ThunderServ is not defined
Source File: http://localhost:50403/ThunderWeb2/Thunder/new_recording.aspx
Line: 105
I delete the service and recreate it with the same code and then it runs fine. but after a while, (1 hour or so), the service isn't defined anymore, I get the error.
Do you see any problem with this:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "[URL]">
I'm in ASP.net and I'm using pikachoose jquery slideshow. It works fine in IE and was working in Firefox. However, somehow it's now stopped working in firefox and firebug is giving the doctype line above out as a syntax error and $ is not defined for the jquery script?
I have the following code where the function codeaddress geocodes the text feild value and returns geocoded value , geocoded value is stored in variable example ,how will i return the variable v2 to the function call and post to asmx webservice.
[code]....
I have read quite a few posts about this error message but unfortunately none of them addresses my particular problem.The error message is: HTTP Error 404.17 - Not Found
The requested content appears to be script and will not be served by the static file handler.The application was fine until it was migrated to VS2008 and targeted to .Net 4.0. For the sake of debugging, I changed the web page (default.aspx) to simply diplaying the word "Test".The following details do not make much sense because the the corresponding handler of an ASP.Net page is StaticFile
Module
StaticFileModule
Notification[code]......
I have almost the same problem as you have described in [URL] service. I have a asp.net webservice that calls a WCF service. On my development machine this is working fine. But if i deploy my ASP.net Webservice it is not working. Both the ASP Webservice en WCF service needs my cridentials. How did you solved your problem. In the logging of the WCF service I see that my credentials is not passing to WCF.
View 1 RepliesWe have two servers, both are containing a local application connecting to local web service, applications and services are identical on both servers. One of the servers work just fine, The other one is just dead, I have impression the the security configuration are different on those servers. What prevents an application X from connecting a web-service, given that another application y on the same server can connect to it. and X is a windows service. What I should check, what is chances?
View 2 RepliesI am trying to attach static attachment with email but I am getting following error in my code: Type 'MailAttachment' is not defined.
My code is as follows:
asp.net Code:
[code]....
have been trying to get to grips with the entity framework using the music store tutorial as a base reworking it to fit an existing application i havei have a database table called AuthorDetail. I also have AuthorDetail.cs Model, and a View AuthorDetail.cshtml strongly-typed to the Model. It's also declared as DBSet in the Entities class :DbContext under the application Models namespace.
View 4 RepliesI try the example on the folow I get error on TYpe DataSet is not defined, I use net 1.1
[Code]....
I have error page settings in my web.config like:
<customErrors mode="RemoteOnly" defaultRedirect="ErrorDocs/500.htm">
<error statusCode="404" redirect="ErrorDocs/404.htm"/>
<error statusCode="403" redirect="ErrorDocs/403.htm"/>
</customErrors>
Is there a simple way to redirect to 404 page without typing its name? Ex: Response.Redirect(404 status coded page);Or is there a way to get default 404 location?
I'm working on a project where I'm replacing an asmx webservice with a wcf service. However, during a transition period, I'd like to have both work for our customers. So I've achieved this somewhat, however I've run into a wall during some testing. I'm getting the following message:
Test method IntegrationTests.StrictMatchTests.StrictProviderPass threw exception: System.Web.Services.Protocols.SoapHeaderException: The message with Action [URL] cannot be processed at the receiver, due to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract mismatch (mismatched Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver. Check that sender and receiver have the same contract and the same binding (including security requirements, e.g. Message, Transport, None)..
I have an asmx file exposed, and I can consume it as a traditional web service. However, they don't seem to be compatible with the older service. If I consume the new service, it works just fine. But I would like this initial transition to be transparent to the end user, and gradually have them consume the wcf service over time.
First of all, let me explain the situation, I know this is a bit complicated.
And I apologize for my poor English.I have created a dll library which contains the classes I created.I tested the library with Console Application and web site created with Visual Studio 2005,everything works fine.So I copied the dll to the "Bin" folder of a running ASP.NET 2.0 web site, added reference to the dll file, imported the namespace, then trying to initiate instances of objects in the dll.
I'm very new to Visual Studio and I am getting this error when trying to update an Oracle table from Gridview using a tableadapter datasource. I've followed the instructions in my text very closely but am at a loss as to why this error is occurring.
Details: System.MissingMethodException: No parameterless constructor defined for this object.
Source Error:
[Code]....
Stack Trace:
[Code]....
this is the stack trace error I am getting. At this point, I'm a little clueless how to resolve it.
I am doing Music Store sample application.Here my code.
StoreViewModel
[Code]....
StoreController
[Code]....
Create.aspx
[Code]....
But when i click Save it show Error
Server Error in '/' Application.
No parameterless constructor defined for this object.
But it's different situation on gridview.
<asp:GridView ID="Grid_Goster" runat="server" AutoGenerateColumns="False" CellPadding="4"
DataSourceID="SqlDataSource3" ForeColor="#333333" GridLines="None"
Height="144px" Width="316px">
<asp:SqlDataSource ID="SqlDataSource3" runat="server"
ConnectionString="<%$ ConnectionStrings:SqlServerCstr %>"
SelectCommand="SELECT * FROM [AVUKAT]"></asp:SqlDataSource>
And i get error like this: Both DataSource and DataSourceID are defined on 'Grid_Goster'. Remove one definition. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.InvalidOperationException: Both DataSource and DataSourceID are defined on 'Grid_Goster'. Remove one definition. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using And in my .cs file there is code like this.
SqlDataReader dr = cmd.ExecuteReader(CommandBehavior.CloseConnection);
Grid_Goster.DataSource = dr;
Grid_Goster.Visible = true;
i think this code works correctly. How can i solve this DataSource and DataSourceID problem?
i have developed a simple form which have only one button and when user click on button then just server datetime will be shown by icallback. few days back it was working but now i saw it is stop working. i am running the program from VS2005 IDE. i just can not understand why it is not working. i am getting two error and the errors are 1) WebForm_DoCallback is not defined 2) WebForm_InitCallback is not defined please help me how to fix this error. here i am giving my code html ----- <%@ Page Language="C#" AutoEventWireup="true" CodeFile="BasicCallBack.aspx.cs" Inherits="BasicCallBack" %>
View 1 Replies