Programatically Load A UserControl From Another Project?
Dec 10, 2010
I like to build a components collection project so that I can use those components later on other projects. For example I created a UserControl called MyDataGrid.ascx
So suppose the projects layout are something like this:
--> IPGostarProject - Under namespace of IPGostar - contains components and lot's of user controls
--> SampleProject - here I want to use MyDataGrid.ascx UserControl from IPGostar namespace.
But as you know LoadControl function only takes virtual directory as it's parameter. So you can't load anything outside the SampleProject directory!
View 2 Replies
Similar Messages:
Jun 22, 2010
In a web page,I can use the following code:
[Code]....
But that doens't work in a web user control. Am I missing a reference, or something?
View 3 Replies
Dec 17, 2010
I have a webpage and on that page i load a usercontrol programatically
now i need to pass a value called fileName from webpage to the usercontrol
but filename is empty and when i put the flvControl.fileName = config.applicationURL & "/video/" & video.folder & "/" & video.videoFile
before flvControl = CType(LoadControl("media/flv.ascx"), mysite.flv) i get object reference error
code on my user control
[Code]....
View 1 Replies
Jun 21, 2010
i'm creating an Asp.Net application and i need to load an UserControl via https. So, in my page i'm loading it with the following code:
...
<%@ Register src="../../pages/controls/bar.ascx" tagname="bar" tagprefix="uc1" %>
<html>
<body>[code]......
Here the UserControl is correctyle loaded via http. So what should i do to load it from the same position but via the https protocol (the certificate is already configured)?
View 1 Replies
Sep 3, 2010
i have a beginners question. I would like to build a website with n areas with usercontrols inside for different actions. For example one usercontrol should show up last n logged in users, or another usercontrol should do a long running operation and should show some calculated information on sales information etc.
Building these controls and the page for this is no problem without AJAX, but how could i make it, that the n single usercontrols load AFTER the base page is loaded with an progress bar like "Loading data. Please wait." and when its finished it should show the information.
How could i make that? I think that this is possible, cause i saw it on several websites.
My first testing was to put two or more updatepanels and in each update one usercontrols. But that didnt work.
View 6 Replies
Sep 16, 2010
How to load usercontrol in (callback or Page methods or Jquery).
View 3 Replies
Oct 27, 2010
i have some usercontrols in "~/Pages/"
my URL will be like ~/Default.aspx?p=Login or ~/Default.aspx?p=ContactUser
now i need to get the QueryString("p") and depend of that i want to load my UserControl To the Default.aspx Page
View 1 Replies
Feb 23, 2011
i put jqgrid in usercontrol and i load this dynamically.But can not show jqgrid.
how to load jqgrid i usercontrol.
View 9 Replies
May 20, 2010
in my aspx page i have some controls loadded dynamic and other one loaded static, when i am loading the user control dynamically,the dynamic usercontrols loaded successfully, but all static control inside page will be removed! i load the user control using the bellow code inside PlaceHolder. this is my code in aspx page:
[Code]....
View 4 Replies
Mar 16, 2011
I have a Page, that has UserControl1.
UserControl1 has UserControl2.
When the page loads UserControl2's Load event is not fired at all.
View 2 Replies
Mar 17, 2011
I am trying to load a usercontrol with its own model, how does this work in practice? What I want really is to click on a button in a View which opens up a UserControl in the center of the page but there will be no sending my model to it because the model used on the page does not contain what I want it to display in the control (More detailed, the page is a memberpage and the uc is an admin page for approving images sent by other members). I've messed around with Inheritance but not really gotten any good results from that perhaps im doing it wrong). This is how it looks today:
The Model
[Code]....
The Controller
[Code]....
The Link
[Code]....
The UserControl
[Code]....
The Error
What can I do differently to make this thing work properly?
View 9 Replies
Jan 19, 2011
I have UserControl that has asp control(<asp:Button runat="server" ID="btn" />) and I want to render it.
I tried 1
[Code]....
It doesn't works because it says that each control that has runat="server" must be in Form.I also tried 2:Because loader.Form is null, I create HtmlForm and added the ctrl to it and then added HtmlForm to loader's Control, BUT it says that it has 2 HtmlForm. So, instead I "injected" HtmlForm to loader like this
[Code]....
Now no error is occurred, BUT StringWriter is empty. don't tell me to add Page to solution and override OnRender. I want to do it as I mentioned above.
View 6 Replies
Nov 16, 2010
When it comes to the usercontrol specially when they are loaded dynamically on the basis of certain conditions then it becomes a very confusing work. I have read in many forums that the dynamic controls have to be loaded in OnpreInit or OnInit. Some of those links are[URL] But this is useful only when if the we know that we have to load UserControl1, UserControl2 without considering any conditions. But what if I have a Tab control and for each Tab Click I have to load the UserControl dynamically. In that situation how can we add the control in either OnPreInit or OnInit. If I am not mistaken then in such case, then we can add usercontrol in certain events. If we are using a TabControl then we load in Tab_Click , if we are using Menu Control then we use Menu_Click and depending
upon the particular tab or Menu we load associated usercontrols. Hence in these conditions, how can we go with the logic mentioned by above links. I have this confusion for very long time . I am posting little portion of my project here. I am using RadTabControl but it doesnt matter if it is Microsoft TabControl. In the aspx, I have a code to define RadTabControl.
<telerik:RadTabStrip
ID="tabMemberDetails"
runat="server"
Skin="WebBlue"
MultiPageID="tabDetails" SelectedIndex="0"
Align="Justify"
ClickSelectedTab="true"
EnableViewState="false"
ReorderTabsOnSelect="true"
Width="1139px"
OnTabClick="tabMemberDetails_Click" ScrollChildren="true">
</telerik:RadTabStrip>
In the code behind, I am loading usercontrol on the basis of the particular TabClick. tabMeberDetails_Click fires whenever I click on the tabs.ViewState["ControlName"] stores UserControlName on the basis of certain condition and finally i load the usercontrol.
proteced void tabMemberDetails_Click(object sender,
RadTabStripEventArgs e)
{
Conditions......
{
ViewState["ControlName"]=........
}
viewDef=ViewState["ControlName"]
UserControl control = (UserControl)LoadControl("~/Controls/"
+ viewDef + ".ascx");
after this I add control to the RadTabStrip.................. and call bind method.........
}
As you can see from above, I am loading my usercontrol in tabMemberDetails_Click event. I see no other choice to do it in OnPreInit. Can anyone answer if this is the right way to do or there is another way that complies with the logic in the links given above.
View 3 Replies
Jan 4, 2011
I have 2 nested datalist that one of them is menudatalist and the other is submenu datalist. whenever I click on my submenu items a dynamic user control should load in dynamic tab. my problem is : one of my usercontrols that is JQGRID does not load in tab and when I click on that submenu Item an empty tab is created,however other user controls are loaded in tabs correctly.
View 5 Replies
Feb 21, 2011
i put asyncfileupload in usercontrol,and i load this usercontrol dynamically,but uploading process do not works. please help me.how to upload image (usercontrol dynamically) and i show this image after upload.
View 2 Replies
Aug 7, 2010
I have this user control :
[Code]....
and i load it dynamicly in Default.aspx like this :
[Code]....
How can I pass the title value ?
View 4 Replies
Jan 15, 2011
I have dynamic button in tab panel. I want to load a usercontrol through this button in tab panel. but it does not work!!! would some body please tell me why is that happen? I also debug my code and it works correctlly but user control does not load in tab panel.
[Code]....
View 8 Replies
Jan 19, 2011
I need to load a web user control dynamically.
Looking at [URL] it states that the page lifecycle events are not fired.
I thought I might be able to raise the events through reflection. I cannot figure how to fire the events, am I missing something?
View 2 Replies
Oct 14, 2010
I have defined the following control which serves as a wrapper for another control (simplified code):
[code]....
Can anyone provide any insight as to why it is failing in one environment, but not the others? Is this something related to configuration? The user control is hosted within a "SmartPart" style user control loader which is being used on a WSS 3.0 site in the DIT/SIT/UAT environments.
View 1 Replies
Oct 23, 2010
How can I load a usercontrol into a placeholder on the parent page when a button on the currently loaded usercontrol, in thesame placeholder is clicked: I have a page called default.aspx that has a placeholder called placeholder1 on it into which I want to dynamically load a usercontrol I have 2 usercontrols, user1.ascx and user2.ascx user control user1.ascx has a linkbutton, when the linkbutton is clicked, I want the event to load the usercontrol user2.ascx into thesme placeholder, that is placeholder1
View 1 Replies
Jan 25, 2011
I need to insert some JavaScript code inside a UserControl that I load from an Ajax call via jQuery Ui Tabs. Let me explain... This is my View (with jQuery loaded)
<script type="text/javascript">
$(document).ready(function () {
$("#tabs").tabs({
cache: false,
});
getContentTab (1);
});
function getContentTab(index) {
var url='<%= Url.Content("~/Home/getUserControl") %>/' + index;
var targetDiv = "#tabs-" + index;
$.get(url,null, function(result) {
$(targetDiv).html(result);
});
}
</script>
<div id="tabs">
<ul>
<li><a href="#tabs-1" onclick="getContentTab(1);">Nunc tincidunt</a></li>
<li><a href="#tabs-2" onclick="getContentTab(2);">Proin dolor</a></li>
<li><a href="#tabs-3" onclick="getContentTab(3);">Aenean lacinia</a></li>
</ul>
<div id="tabs-1">
</div>
<div id="tabs-2">
</div>
<div id="tabs-3">
</div>
</div>
With these lines of code I call the Ajax function to load the content into a DIV.
This is the Action from the controller:
public ActionResult getUserControl(int num)
{
return PartialView("TestUC", num);
}
And this is the UserControl...
<%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %>
Number... <span id="testSpan"><%=Model.ToString() %></span>!!
<input type="button" value="Click me!!" onclick="message();" />
<script type="text/javascript">
function message(item) {
alert($("#testSpan").html());
}
</script>
The problem is that the message() function returns always 1 (instead of returning the correct number). My question is... How should I add the script to my UserControl in order to have my code running correctly?
View 2 Replies
Jan 27, 2011
I have a simple UserControl that I've created that simply allows a user to enter the date. For the time being, it has a single Textbox with ID="tbDate". I am trying to dynamically add this control multiple times via (for example) `placeholder.Controls.Add(LoadControl())` but am receiving the error "An entry with the same key already exists". I could, perhaps, change the ID of the elements but then it would be difficult to grab the value entered by the user.
View 3 Replies
Feb 20, 2011
i want to load a usercontrol that contains a gridview with paging and sorting capabilities without postback.
Code for Load UserControl in case Dynamically is:
[Code]....
View 4 Replies
Jun 20, 2010
How to load UserControl at runtime and invoke the methods present in that usercontrol dynamically( at runtime)?
View 4 Replies
Oct 3, 2012
I want to use same functionality in Ajax:Accordion. Looking for the code for this as well as instead of label in user control i want to bind the grid view.
View 1 Replies
