My website currently uses frames. My index.html homepage looks something like this:
[Code]....
Well, apparently frames are way outdated, "element frameset is not supported" in XHTML Transitional 1.0 and "newer constructs are recommended." So, what do I do instead?
I would like to convert my Frames-based web application to non-frames.Challenges:I have a frame of exploding tree menus (total tree around 1,000 menu choices - up to 5 levels of average 7 choices for each item). From this menu, one gets to the first content page (all dynamically created data pages). The content page can link to other content pages and so one.As the user navigates around in the right side, how can I have the display retain the exploded structure of the menu without using Frames (in a way that the browser back button will continue to work).Does anyone have an example of an application where there are many content sections on the screen which retain their state as the page is refreshed, without using frames?
View 3 RepliesI'm designing an enterprise web application interface based on an old system, and i planned to migrate the old frames layout to master page, but i noticed that if i use masterpages, the application users will be able to see the querystring or route path, and it could be a security issue. What is the best way to avoid this? Using frames? Masterpages with iframes as content? Masterpages with all PartialViews loaded by jquery?
View 1 RepliesI'm working on an ASP.NET web application. There's a bill page which has two links to different pdfs of the same bill. When you click on one of the links it takes you to a ViewPDF.aspx page that shows the pdf. There's also an option to view both in a split screen so that you can compare them. When you click on this link it takes you to BillSplit.aspx which has a frameset and two frames that both point to ViewPDF.aspx. This all works perfectly.
The problem is that if an error occurs while pulling up the pdf. The application has an error page that has a few links back into the application. If you use one of these you can go back into the app and continue but now inside the frame. The URL still says BillSplit.aspx but the application is completely unaware of this since frames are HTML elements not asp.net controls.
What I would like to do at this point is detect that you've returned to the application and close the frame you aren't using. Essentially I'd like to redirect you away from BillSplit.aspx and to the page you're actually requesting. I'm pretty sure this would need to be done in Javascript either on the BillSplit page or on the pages that you go to later. So I guess what I'm asking is, is there a way to ensure that the BillSplit.aspx page and it's two frames point only at ViewPDF.aspx?
I want to capture the frames of a video file through C#. I dont want to use the FrameGrabber or other built dll's. I amlooking it from plain dot net without using COM.
View 2 RepliesIn my page, I have two Frames (frame1, frame2) with one button on each frame as button1 and button2.
All I m trying to find out how can I click button2 from button1 in Frame1?
Utilizing Visual Studio 2008 and creating Web Application Project. I am looking to use Master page system with Frames. I was wondering if this is possible at the current state?
View 3 RepliesI'm having an aspx page with 2 frames, one is the header and the the other one is content frame which i'm trying to load it dynamically. Everything is fine. Let me explain my scenario
On the header frame i'm having 5 link buttons and when a link button is clicked i'm passing a hardcoded Page URL to the frames containing page and then trying to load that page in the content frame.
Below is my code, Everything as far as i know are in right place, but i cannot see the page in content frame..
Header.aspx.cs
[Code]....
Then checking frameURL querystring in default.aspx page load:
[Code]....
when the querystring is null, the SiteSummary.aspx page is getting loaded in content frame without any issue, but when there is a querystring value the page is not being loaded.
Here is my Default.aspx page
[Code]....
How can I integrate my aspx page into my existing php/html frameset page? So far I've designed the aspx page, now I need to know what to put in my button_click event.
In javascript I use this to get one textbox's text:
var t1=window.parent.text1.getText();
and this to set another textbox's text:
window.parent.text2.setText("text");
How can I tie this in to my button_click event?
I am collecting information and sending an email confirmation on form-submit. I want to find any instances of SSNs in the body of the email and replace the beginning digits with "X". I'm trying to use a regex to find/replace:
emailBodyConf = Regex.Replace(emailBodyConf,
"^d{3}-d{2}-d{4}$",
"XXX-XX-XXXX"
)
This code above isn't replacing anything, but what I really want to do is replace the first five digits and leave the last four.
I am still learning and improving myself in ASP.NET MVC.I have partial view with following lines to get a input from users for Category field. It is working absolutely fine.
<%: Html.LabelFor(model => model.Category) %>
<%: Html.TextBoxFor(model => model.Category) %>
I want to replace this with set of values in Combobox and allow user to select any one of them.Could anyone please tell me how could I achieve it.
The code below works but confuses Visual Studio. Are there alternative/better ways to accomplish this?
<body <asp:contentplaceholder id="BodyAttribute" runat="server"/>>
I have an existing .NET 1.1 dll that I do not have the source code for. It contains the code-behind for a asp.net page containing various form controls including a third party text editor that I no longer want to use. I want to replace the text editor with a simple asp:Textbox but the existing textbox is baked into the old assembly. How can I override / extend the existing page to use a textbox instead of the old text editor control?
View 1 Repliesdoes anyone know if its possible to replace the updatepanel in asp.net ajax toolkit with some kind of jquery?
Basically we use the update panel so that when we do postbacks that the screen doesn't actually do a full refresh .. just the values ..
I am using jquery for a lot of other stuff and would love to know if there is some way to do this or even if a jquery plugin exists that lets you do it.
I am a bit unsure but would this mean i have to rename all my methods to static and decorate with the webmethod attribute?
If this is the case, it maybe a lot of work :-)
And of course how would Page_Load execute if it was a static webmethod?
i have a string, and i want to replace the last comma with something else. For instance this is my string;
"Monday, December 6, 9:00 PM"
How do i replace that last comma so it can look like this;
"Monday, December 6 2010 9:00 PM"
I have a System.Web.UI.WebControls.Xml control (Xml1) in a webforms app that I have upgraded from .NET 2.0 to .NET 4.0
I am getting two warnings from the code-behind page that I'd like to do something about.
[code]....
'Public Property Document As System.Xml.XmlDocument' is obsolete: 'The recommended alternative is the XPathNavigator property. Create a System.Xml.XPath.XPathDocument and call CreateNavigator() to create an XPathNavigator.
Using vb.net/asp.net
I am reading names from a file, some of them have special spanish characters like this: ñ
My end goal is to replace the special characters, however when I read the names into a string and then put a breakpoint and run my program in debug to see what I'm reading in my watch window shows a square in place of the special characters as if it's having problems reading the special characters.
EX:Muñoz from the file
is displayed
Mu�oz in my vb.net string
what I need to do so that my vb.net code and correctly read the special characters?
I have an intranet web project that is currently using the IEWC tabstrip and multipage controls.
Since these are very out of date, and cause lots of issues when trying to support multiple browsers, I am trying to find a good way to replace these controls, preferably without and drastic changes to the site's design or usability. One method I am considering is using jquery UI tabs, which looks like it might work in a similar fashion.
How can I replace these outdated controls?
Current snippet:
<iewc:tabstrip id="ts1" style="position:relative; float:left;" runat="server" TargetID="mpVert">
<iewc:Tab HoverImageUrl="images/selected_tab1.gif" SelectedImageUrl="images/selected_tab1.gif"
DefaultImageUrl="images/unselected_tab1.gif"></iewc:Tab>
<iewc:Tab HoverImageUrl="images/selected_tab2.gif" SelectedImageUrl="images/selected_tab2.gif"
DefaultImageUrl="images/unselected_tab2.gif"></iewc:Tab>
</iewc:tabstrip>
<iewc:multipage id="mpVert" runat="server" BorderWidth="1px" BorderStyle="Outset"
style="position:relative; float:left; width:99.9%; min-height:200px;">
<iewc:PageView>
<SampleControl:MyControl runat="server" id="sampleControl" name="JustAnExample" />
</iewc:PageView>
<iewc:PageView>
<div>More stuff in here for tab 2</div>
</iewc:PageView>
</iewc:multipage>
One of the issues I am running into is that the site was originally designed with the expectation that the controls on every tab would be included in the page for every request. This could be changed, but as this is a side project, I'm hoping to find a way to work around this.
Is it possible to replace the sitemap section of web.config using the replacement functionality of Web Deployment Projects? I have tried doing this in every configuration I can think of and I get a WDP00002 missing section error every time.Web.config file section replacement command: system.web/sitemap=sitemap.configBoth .config files are in the root of the project and no matter how I set up the sitemap.config file I still get this error.
View 1 RepliesHow I can Replace charachter '+' Instead of Space between this words or sentencefor Example :
Before = I like ASP.NET
After = I+like+ASP.NET
I have a solution that uses Accordian and tab controls, amongst others.Is it worth swapping these out and use the jQuery controls instead?
What are the benefits? Is it best practice to load one tab at a time with data?
Using vb.net 2005/asp.net I thought I had the issue solved: I have some strings with spanish characters such as "ñ" and I need to replace characters with their non-spanish equivalent, ex: the example I just mentioned would be changed to "n".
[Code]....
when I put a breakpoint I see that usually my code replaces the characters the way that I want and all is good but some replacements are not working well and looking at my breakpoint it appears that there are non-readable characters that are included with the spanish characters and it seems that I need to do some kind of normalization on the string but not sure what to do. I have a text "caroliné" that i processing and in the code above it appears to replace the last char with an "e" but when I return the value from the function I am able to see some non readable characters (appearing on my watchlist as a small square) and the resulting string is actually "carolina" which is confusing.
I have a css menu on a master page:
[Code]....
what i am trying to achieve is that. when any of the links is clicked. the <a href> tags are replaced by <span> tags. Is this possible? i tried playing aroung with HtmlGenericControl class but i could not solve it.
I have a table being brought in using HttpWebRequest (screen scraping). The table I grab is formatting properly but I have noticed a situation. This table has a URL which refers to a physical web page. What I would like to do is to take that URL using a .Replace clause and thereby change the URL to reflect <a href="details.aspx?id=111"> as opposed to <a href="111.htm">. So I went ahead and tried doing it this way but it doesn't do any replacement.
[Code]....
I figured using the regex expression it would find it and then I could just reuse it.
In my application I am using some templates in docx and pdf format. I am storing this docs to DB as Bytes.
Befor showing/sending this docs back to user or application I need to replace some contents inside the doc. eg:if the doc contain @@username@@ I need to replace this with the exact username of the customer.
