Security :: HTTP 404 - File Not Found

Mar 23, 2010

My application source code is under Driver H: in my Dev server.

The security settings under Driver C: (right click->properties->security tab) has access setup as "Everyone", but when I remove "Everyone" from C: and run my application, I am getting HTTP 404 - File not found. The app works fine if it has Everyone. I dont want to grant access to Everyone under C:.

How can I run my app which is setup under driver H: run without any issues by removing the Everyone Access in C drive.

View 2 Replies


Similar Messages:

HTTP 404 - File Not Found Instead Of MaxRequestLength Exception?

Jan 19, 2011

I have a file upload control on my page. The maximum request length set is 8 MB (maxRequestLength = 8192). I also have server validation that throws an error if the file is more than 4MB. The reason that its 8MB in the config is the leverage that's given to the user and also that the app can be tested.

If I upload a file that's 9MB, I get thrown an exception "Maximum request length exceeded.", which is fine and as expected.

But when I try to upload a file that's 1GB, it shows me a HTTP 404 - File not found. how can I get it throw me a maxRequestLength exception?

I'm using IIS6.

View 2 Replies

C# - Routing On IIS 6 Compiled Web Application / HTTP Error 404 - File Or Directory Not Found

Jun 30, 2010

I have a web application and I'm using asp.net routing. When I publish it with the Only files needed to run this application selected it gives me an error when I'm loading any of the page "HTTP Error 404 - File or directory not found."

but if I choose publish All files it works fine.

Do you know how to resolve this issue?

View 1 Replies

Web Forms :: Uploaded Http://www.mymrt.net/trigASP3/cos.aspx And The File Cant Be Found?

Aug 7, 2010

I uploaded http://www.mymrt.net/trigASP3/cos.aspx and the file cant be found. I have an asp.net website in VS2008.In the app_code folder I have class files.It all works fine no problem on my PC so there is no issue on my PC.I uploaded the whole website to my host and I get a file not found due to the code behind using a class fileI take away the class file refernce from the code behind and it works.

View 6 Replies

Configuration :: No Http Handler Was Found For Request Type 'GET'

Mar 30, 2010

I have a new virtual server, subsite. but I get the feeling I may be still be inherting from the root config! Even though I have included <clear/> within both the <connectionString> and <httpModules>.

The main website works (web1) along with one of the subsites (web2) however the 3rd subsite (web3) gives the below error.

e.g.

http://web1

http://web1/web2

http://web1/web3

Gives the following error :

No http handler was found for request type 'GET'

Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Web.HttpException: No http handler was found for request type 'GET'

Source Error:

[Code]....

Stack Trace:

[Code]....

Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082

View 1 Replies

Web Forms :: Google HTTP/1.1 302 Found Connection Close ?

Mar 4, 2011

I made a site www.hediyelikdukkani.com and I added the site to goole from web masters tools. But google doesn't index my web site. When I test my site how the google see from Test like a Google bot from web masters tools it says that

[Code]....

View 3 Replies

MVC :: Error While Implementing Pagination- Resource Not Found HTTP 404?

Jan 24, 2011

In my solution, I added the following class in the Helper folder

[Code]....

Now, In my HomeController, I used following Index function

[Code]....

And in Global.asax.cs, routing as

[Code]....

In my View of Index funtion, I have following code

[Code]....

Now the problem is on opening sitename/Home, I am getting 2 post as required but when I click on next then I am getting HTTP 404 Error. The url formed is like sitename//Home/Page/1. (Edited later- Typo. Single / not //)

View 4 Replies

Web Forms :: No HTTP Resource Was Found That Matches The Request URI

Jan 24, 2016

I try to add a new web api to my .net application and place it on Azure (where all my APIs are).

The new API is getNumbers:

public class GetNumbersController : ApiController
{
[HttpGet]
public List<string> GetNumbers(string planeType)
{
...
} }
 
For some reason i can't access it. when i type the url [server]/getNumbers i receive:

<Error>
<Message>
No HTTP resource was found that matches the request URI 'http://aeronexus-we.azurewebsites.net/GetTailNumbers'.
</Message>
</Error>
 
Of course that all my other APIs build the same and are accessible

I even can't see my new API under
[server]/help (where i can see all the others)

Locally I can access my new API

 The routes is:

config.Routes.MapHttpRoute(
name: "ActionApi",
routeTemplate: "{controller}/{action}/{id}",
defaults: new {id = RouteParameter.Optional})

View 1 Replies

Configuration :: URL Routing / Rewriting - Http 404 Page Not Found Error

Dec 25, 2010

In my website users can create thier own websites by making folder of thier choice like: [URL] Where the folders Pankaj and Adam are storing in database. I just want that when user after creting thier website just clicked or type the address of thier website as [URL] then if the folder with name Pankaj exists in database then the page will open otherwise it gives the http 404 page not found error. And while the address [URL] is opens then i donot want to physically create it on server. My requirement is that i want to open it by the concept of url rewriting/ Routing. Which one concept will be good for this. And can anyone provide some code with example that how can i achieve this easily.

View 2 Replies

Configuration :: The Request Failed With HTTP Status 404 - Object Not Found

Jul 28, 2010

I am getting an error as "The request failed with HTTP status 404: Object Not Found." earlier I used to get the output for this source code.

from the last two days i am scraching my head, i could not solve the problem, but i have traced the problem, that is when i tryed to open 'http://localhost' from my explorer i am not gettting the IIS help page.

View 3 Replies

View In Browser Fails With 'HTTP 404 Not Found' Error Message?

Feb 16, 2010

I used to be able to view the pages of my ASP.NET 3.5 website locally via the 'View in Browser' facility. However, this no longer works (for any page). All I get is a 'HTTP 404 Not Found' error message.

Where might I have screwed things up?

View 4 Replies

Web Forms :: No Http Handler Was Found For Request Type 'get' Sharepoint2010?

Jun 18, 2010

I have created a chart control webpart and trying to deploy onto sharepoint2010 page. I am able to add the standard webparts. When it comes to the webparts related to chartcontrols I get the following error.

no http handler was found for request type 'get'.

View 1 Replies

Visual Studio :: Configuration Tool Won't Run In VWD2010 / HTTP Error 404 - Not Found

Apr 28, 2010

My project works under VWD2010 but when I click the Configuration tools at Solution Explorer, nothing happens unlike under VWD2008.

The configuration developement port is running and accessing it only gets me this error, [:(]

Server Error in '/asp.netwebadminfiles' Application.

HTTP Error 404 - Not Found.

View 1 Replies

WCF / ASMX :: The Requested Failed With HTTP Status 404:Not Found When Access The Webmethod In Webservices?

Oct 11, 2010

when I access the webservices URL through browser ,I am able to access the URL ,If i use the webmethod in c# code the error message is diplaying like "The Requested Failed with HTTP Status 404:Not found".

View 5 Replies

Installation :: Another "HTTP Error 404.17 - Not Found" On Vista Business Targeting .Net 4?

May 5, 2010

I have read quite a few posts about this error message but unfortunately none of them addresses my particular problem.The error message is: HTTP Error 404.17 - Not Found

The requested content appears to be script and will not be served by the static file handler.The application was fine until it was migrated to VS2008 and targeted to .Net 4.0. For the sake of debugging, I changed the web page (default.aspx) to simply diplaying the word "Test".The following details do not make much sense because the the corresponding handler of an ASP.Net page is StaticFile

Module
StaticFileModule
Notification[code]......

View 3 Replies

MSCharts "No Http Handler Was Found For Request Type 'GET'" Error?

Jan 22, 2010

I tried to install MSCharts on my Win2008 server. It installed without problem. Then I wrote in configBut when I'm trying to open page with charts it returned following error.No http handler was found for request type 'GET'Do you have any thougths about the problem?

View 4 Replies

Security :: RSA Key Container Not Found

May 7, 2010

I am trying to debug on my local machine an application that has encrypted connection strings. The error when I go to register the Key Container is:

C:WINDOWSMicrosoft.NETFrameworkv2.0.50727>aspnet_regiis -pa "CompanyDirector
yKeyContainer" "PHXDEVELOPER26ASPNET"

Adding ACL for access to the RSA Key container. The RSA key container was not found. Failed! I am getting this when I run the debug:

Server Error in '/' Application.
Configuration Error

Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Failed to decrypt using provider 'CompanyDirectoryRsaProvider'. Error message from the provider: The RSA key container could not be opened.

Source Error:

[Code]....

Source File: C:ProjectsSystemInformationSystemInformationweb.config Line:
21
Version Information: Microsoft .NET Framework Version:2.0.50727.3607; ASP.NET Version:2.0.50727.3082

And, last but not least, I did copy all the MachineKeys over into my MachineKey directory as well, with one explicitly saying CompanyDirectoryKeyProvider in it. What I am doing wrong and what do I need to do to correct this?

View 2 Replies

Security :: Group Name Could Not Be Found

May 13, 2010

We recently retired our server 2003 domain controllers and moved to server 2008r2 DCs. We overlooked an old web application built using asp.net. The error we receive when attempting to log into the app is below. I assumed a setting in the web.config was pointed at a retired DC and it was. Removed the old value and added the correct DC name and we are still generating the error.

The group name could not be found

Source

System.DirectoryServices

Exception Type

System.Runtime.InteropServices.COMException

Message

The group name could not be found.

StackTrace

at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail) at System.DirectoryServices.DirectoryEntry.Bind() at System.DirectoryServices.DirectoryEntry.get_NativeObject() at System.DirectoryServices.DirectoryEntry.Invoke(String methodName, Object[] args)
at CSBaseObjects.ADGroup.ReturnUsers() at sysusers.LoadDomainUsers()

TargetSite

Void Bind(Boolean)

View 1 Replies

Security :: RSA Key Container Couldn't Be Opened / Found

Jan 25, 2010

When trying to open a page I am getting this error: Failed to decrypt using provider 'RsaProtectedConfigurationProvider'. Error message from the provider: The RSA key container could not be opened. I did some reading and it seems that this command woudl fix it:

from here [URL]
aspnet_regiis -pa "NetFrameworkConfigurationKey" "ASPNET"

I tried that but I get a new error:

C:WINDOWSMicrosoft.NETFrameworkv2.0.50727>aspnet_regiis -pa "NetFrameworkCon
figurationKey" "ASPNET"

Adding ACL for access to the RSA Key container. The RSA key container was not found. failed . Now, I don't really understand all of this stuff (my boss just said: Heres the problem, fix it).

View 1 Replies

Security :: Default Role Provider Could Not Be Found?

Oct 26, 2010

This is probably a lame question, but I know little of web development. I inherited a web project that I'm trying to get running locally. I get the mentioned error on line 46.

Line 44: </authentication>
Line 45: <membership defaultProvider="AD_MyCompanyName" />
Line 46: <roleManager enabled="true" defaultProvider="ADRP_MyCompanyName_Readonly" cacheRolesInCookie="true" cookieName="MyCompanyName.ROLES" createPersistentCookie="true" cookieSlidingExpiration="true" cookieTimeout="240" />
Line 47: <profile enabled="false"/>
Line 48: <customErrors mode="Off"/>

This code works on the old developer's box, but not on mine. I've been working through some TFS checkout issues on his box, assuming it was simply files left checked out. I can't figure out where the providers are added. I don't see them being added in the config file above. In fact, if I search for "AD_MyCompanyName" and "ADRP_MyCompanyName_Readonly", I get no hits in the entire solution. I can't figure out what they are. Not sure why it works on that box if I can't even find the providers being added.

View 2 Replies

Security :: LoginURL - Getting Error HTTP 404

Jun 6, 2010

I am trying to redirect into login.aspx with authentication mode written in Web.config as given below.But

the page redirect as [URL] with "

The resource cannot be found.

Description:

HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. review the following URL and make sure that it is spelled correctly.

[code].....

View 3 Replies

Security :: Sender URL For HTTP POST?

Jul 19, 2010

I am working on a application which will accept the data in the post request.I will surely implement the data encryption to make sure that communication is secured. But my concern is, any body who knows the URL will be able to send the POST data request to my application, can I restrict the request from once specific IP address/URL.From a Request object can I find out which application/HOSTname/URL has sent this request. I looked at RefererURL but it can be populated and cannot be used. Is there any other field/properly which will tell me about the party who has sent this request.I want to make sure that I process request received from one specific URL/IP and want to ignore all others.

View 5 Replies

Security :: HTTPS Keeps Appearing As HTTP?

Jan 26, 2011

I have a part of my website that uses SSL, and a part that does not. I began having issues recently where the link that takes you to the https part of the site would keep getting rerouted to http. In IIS I have SSL on and required for the members directory, and the certs are all fine. My site is http://mcsd-sc.mcbarons.manheimcentral.org/. I first started by routing the pages directly to the secure part using the <meta http-equiv="refresh" content="0;url=urlgoeshere" /> on a redirect page in the /members directory and this was working perfectly. When my issues started, changed it and made the link just go directly to the members part of the site with the https included in the URL (this is how it is now). Now when you click the link it takes you to the member page without using https, thus throwing an error because I have SSL required on that part of the site. When you look at the code in IE, it just shows the direct link using plain HTTP. When I open the code directly on the server, I see the URL beginning with HTTPS. I've been having a lot of issues lately with updated content not refreshing itself, and rebooting the server does nothing. At this point I'm stumped. I think it might be something in IIS, although I haven't touched it in a long time, unless a recent security update messed it up, which is the only explanation I can think of that would screw it up all of a sudden. The site works perfectly when you manually type https. I thought it might have also been my cache, but I just tried it on a computer that I haven't ever gone to the site on before and I got the same issue.

View 5 Replies

Error Saying That The XML File Can't Be Found?

Sep 27, 2010

I'm working on a custom menu system in asp.net that populates a horizontal menu on the fly based on which menu item is selected from the website's main menu.This 2nd menu is populated from a custom XML file in the website's root directory.(See http://loganyoung.wordpress.com/2010/06/03/asp-net-horizontal-submenu-from-xml/ for details).At the time I'd written that post, it did work, but my development environment has changed and now I'm getting an error saying that the XML file can't be found.

View 2 Replies

MVC :: File Not Found 404 Error On IIS 6?

Jan 5, 2011

OK, I was having some deployment issues on IIS 5.1, but at one point (right before the machine died) I was able to serve the files. I'm not certain what is lacking in my current case, but now I'm trying to deploy on IIS 6, and cannot get anything but "404 not found" errors. It's driving me nuts.

Just to be sure the site is working, because it isn't in the web root (virtual directory), I dumped a Web Forms website in there, and it worked just fine. I've tried setting up a wildcard in IIS by going to the properties of the site, and in the area under the file extension mappings, I clicked Insert to create a wildcard, assigning it to the aspnet_isapi.dll file. No dice. And yes, I remembered to uncheck the "Verify file exists" checkbox. Since this is IIS 6, I also made sure I had the Default.aspx page, with the code:

[Code]....

So all should be good. But it's not. I've combed over at least 6 websites and related links on getting MVC 2 to work on IIS 6, but nothing has worked so far. I cannot purchase the url rewritier mentioned in Steve Sanderson's blog, nor can I use the free version, since my application isn't the only web site running on this server. I can't use extensions for the pages, either. This is a crude hack I really don't want to deploy in a production application.

View 4 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved