Security :: How To Encrypt The ConnectionStrings In File Web.config
Mar 15, 2011
I fully followed the steps in this page [URL]
look at the step 5 at "Using the Example Provider in an ASP.NET Application" element , I entered the command "
aspnet_regiis.exe -pe "connectionStrings" -app "/SessionState" -prov "TripleDESProvider"
" at the windows command line, it asked me "The protection provider 'TripleDESProvider' was not found"
I make sure the files keys.snk and keys.txt are in the same folder and the file web.config is correct. Who can tell me the reason for the error and how do I handle with it?
View 2 Replies
Similar Messages:
Nov 28, 2010
I'm all set on the server side with the RSA key pair installed. Where I'm hung up is trying to get the job done on the web.config file ... can't seem to get the aspnet_regiis command string right. I am using the command string provided by the web host (DiscountAsp.net). Most (all) of the examples I read use a website on the development machine. I actually registered my project in IIS and tried that but it didn't work. In any case I would rather not have to go to the hassle of registering a project in IIS anyway if I can avoid it.
Details:
My web application project is in a folder on my local machine:
D:Projects<project name>
This is most recent (failed) attempt to use aspnet_regiis:
C:WINDOWSMicrosoft.NETFrameworkv4.0.30319aspnet_regiis.exe -pe "connectionStrings" "D:Projects<project name>"
Is it possible to just do this manually by looking at the NetFrameworkConfigurationKey_xxxxx.xml file and entering the values? Seems like it should be do-able except I'm not sure how to parse the xml file for the correct values.
On a related note, when I add the following code to web.config it "announces" that "The keyContainerName attribute is not allowed". Ditto useMachineContainer
[Code]....
View 2 Replies
Feb 4, 2011
Any section in my web.config file that I want to encrypt I run this command line util:
aspnet_regiis -pe "anySection" -app "/SampleApplication"
It all works just fine until I try encrypt my connectionStrings sections
I define (and I cannot change this) my connectionStrings section like this:
[code]....
Is there a way of doing this using the aspnet_regiis util? Doing it with code is not an option for me.
Also is there a way to run this untility without specifing the application (-app "/SampleApplication") instead giving the path to the web.config file?
View 2 Replies
Jan 2, 2010
i have mail setting in web.config
[Code]....
Now how i encrypt only the Password ?
View 6 Replies
Mar 16, 2011
How can I encrypt a web.config file? And how can I then decrypt it again?
View 2 Replies
May 6, 2010
Our conn strs reside in an external file <connectionStrings onfigSource="ConfigurationConnectionStrings.config" />Is there a way to encrypt this external file either using aspnet_regiis or System.Configuration?
View 4 Replies
Jan 25, 2013
How to encrypt web.config file
How to use 'DataProtectionConfigurationProvider'...
View 1 Replies
Jul 22, 2010
I would like to encrypt the connectionstrings section in my web.config file using the : ASPNET_REGIIS utility However I'm running Windows 7 pro, that is without any IIS.
Is it possible for me to do it.
The path (on my local pc) to the website containing the web.config file is like this:
C:UsersmyUserDocumentsVisual Studio 2010ProjectsmyWebsitemyWebsiteWeb.config
View 3 Replies
Dec 24, 2010
<system.net>
<mailSettings>
<smtp from="email@domain.com" deliveryMethod="Network">
<network clientDomain="www.domain.com" host="smtp.live.com" defaultCredentials="false" port="25" userName=" email@domain.com " password="password" enableSsl="true" />
</smtp>
</mailSettings>
</system.net>
This is the case where I need encryption for my password. I searched and googled much on the web but I can't be able to encrypt anymore.
View 3 Replies
Jul 20, 2010
I'm trying to programmatically encrypt the connectingstrings section of my web.config, using the below code, which I have gotten from here.
[URL]
The problem is that nothing happens when I click encrypt.
This is my code.
[Code]....
[Code]....
And this is the web.config
[Code]....
Has I understand is the section should be encrypted, but it never happens.
View 4 Replies
Jun 1, 2010
I have looked for ideas on this and read several posts but none of them seems to be because the problem is that web.com (my host) doesnt allow us to update web.config on their server programmatically. I can use example codes and encrypt them on my local pc but heres the error i get when I run them on the live site:
An error occurred loading a configuration file: Request for the permission of type 'System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. (machine.config)
View 2 Replies
Jan 13, 2011
Using C#, is there are way to differentiate between ConnectionStrings in the machine.config and the web.config? I would like to iterate over the collection in the web.config but not those from the machine.config. ASP.NET 3.5, C#
View 4 Replies
Nov 13, 2013
How to Encrypt App Settings in Web Config file in asp .net
View 1 Replies
May 7, 2015
How can encrypt the web configuration file ... so I don't want the connection name is appeared. How to do ncryption of web config file.
View 1 Replies
Nov 29, 2013
I want to encrypt my web config when i deploy it to server so that the username and password of database is secured. I've tried some of the encryption and it did'nt work. here is my code.
Imports System.Collections.Generic
Imports System.Text
Imports System.Configuration
[Code].....
View 1 Replies
May 11, 2010
I use visual studio 2008 login controls to build up a login web page and have a hosting MS SQL with godaddy. After the login page is finished, I went to server explorer to publish DB to provider and save it in .sql. Then I went to godaddy hosting and executed the exported query. I also added the following connectionstrings to the web.config
<connectionStrings>
<remove
name="LocalSqlServer"/> [code]....
When I run the website, I received the following error
Configuration Error
Description:An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error:
[Code]....
Question 1: I have also copied membership,profile,rolemanager from .NETconfigmachine.config to web.config but it didn't solve the error.Question 2: Can I use this built in control with its express DB or I have to create one by my own? What should I do in web.config for connectionstrings?
View 6 Replies
Mar 22, 2010
I am writing a login routine that uses a .NET login control and I have a membership provider as well and set it all up in the config file. But I don't plan on using a connection string as I will be calling a web service in my ValidateUser function. Do I need the connection string in the config because it seems to throw an error if I don't have it.
In that case if you need it then wouldn't it be better to treat this membership provider class more as a normal class and just make calls to it directly like any class and not put any setting on my login control and remove the entry from my web.config
View 5 Replies
Jul 18, 2010
For example, I have these connectionstrings in my web.config:
<add name="xxx1" connectionString="..."/>
<add name="xxx2" connectionString="..."/>
I want to put 2 connection strings into my aspx.cs page; xxx1 and localsqlserver. I tried to do:
string strConnectionString = ConfigurationManager.ConnectionStrings["LocalSqlServer"].ConnectionString;
strConnectionString += ConfigurationManager.ConnectionStrings["xxx1"].ConnectionString;
but it cannot "detect" the LocalSqlServer. I am trying to populate a GridView with fields from 2 different database, hence I need 2 connectionstrings. Example of my SQL statements:
string strCommandText = "SELECT aspnet_Users.UserName, TableA.Field1, ";
strCommandText += " FROM aspnet_Users, TableA, TableB";
strCommandText += " WHERE aspnet_Users.UserID=TableA.UserID, TableA.ID=TableB.ID";
View 6 Replies
Oct 13, 2010
I have two connection strings being used:
<add
name="db1"
connectionString="Server=localhost;user
id=root;password=;persist security info=True;Database=db1"
providerName="MySql.Data.MySqlClient"/>
<add
name="db2"
connectionString="Server=localhost;user
id=root;password=;persist security info=True;Database=db2"
providerName="MySql.Data.MySqlClient"/>
I would like to have two different Role Providers using these connection strings:
<roleManager
enabled="true"
defaultProvider="rp1"
cacheRolesInCookie="true"
createPersistentCookie="false"
cookieProtection="All">
<providers>
<clear/>
<add
name="rp1"
type="MySql.Web.Security.MySQLRoleProvider,
MySql.Web, Version=6.1.3.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d"
connectionStringName="db1"
applicationName="test"/>
<add
name="rp2"
type="MySql.Web.Security.MySQLRoleProvider, MySql.Web, Version=6.1.3.0, Culture=neutral,
PublicKeyToken=c5687fc88969c44d"
connectionStringName="db1"
applicationName="test"/>
My application starts with a login screen. Based on what the user selects, I would like to control which database to connect to. (DB1 vs DB2). The problem is, when the application starts the Role Provider defaults to "rp1". Is there a way I can change the default provider during runtime?
View 5 Replies
Apr 6, 2010
We use Sharepoint to control our websites. We build the sites, then load them into the sharepoint server. My question is if I use windows authentication, how can I get my role security in my web config file to coencide with the asp.net controls that use the Forms authentication. Is there a differenence? Our security uses a session variable for security but there is no where to set up their permissions except in active directory. I hope this makes sense because I would like to implement the LoginView with Role groups but how can I give them the role="administrator"? Do I have to go into active directory and give them these permissions(would take awhile due to the size of the company)? Or do I have to set up priveladges in the web.config file for each user(difficult I think)?
View 5 Replies
Mar 21, 2010
How to use encrypt web.config in deployment?Where it should be kept?
Or in other way how to encrypt web.config file in deployment?
View 5 Replies
Dec 20, 2010
I'm trying to encrypt the connection strings in my web.config. I'm following:
http://msdn.microsoft.com/en-us/library/2w117ede.aspx
however when I get to the part with the command:
aspnet_regiis -pe "connectionStrings" -app "/MyApplication" -prov "MyProvider"
it keeps complaining:
"The configuration for the virtual path '/MyApplication' and site 'Default Web Site' cannot be opened
Failed to map the path '/myapplication'
Failed!
I'm fairly sure I've followed the instructions correctly. I created the project named 'MyApplication' directly in the 'C:' root.
Perhaps I should be following a different set of instructions?
View 3 Replies
Mar 18, 2010
i need to encrypt the SMTP settings for my web site, i tryed the aspnet_regiis.exe pe... but i got an error this is not a valid virtual dir. i have the website on the C drive on my development machine, i have encrypted the connectionsettings via .net code but cant finde a solution for the smtp node can i encrypt the smtp in development pc or it hacse to be deployed first?
View 5 Replies
Aug 30, 2010
I have developed asp.net 2.0 website with crystal report now what my problem is whenever i go to crystal report page its by default going to login.aspx or default.aspx though i didt set any login to my asp.net page..
I talk with my hosting provider they said that the asp.net impersonate is enable..
I think in IIS 7 authentication if i set anonymous access enable, will it work fine?
so i need to know how to enable anonymous access from my webconfig ..
View 3 Replies
Mar 12, 2010
I want to encrypt web.config connection string. But Getting Error
System.Security.Cryptography.CryptographicException: Object already exists.
why is this happening. How to tackle with this problem.
View 1 Replies
