Security :: Generated "invalid Syntax" Error - Write Entries In System's "Event Log"
May 25, 2010
I am recently trying to set enough permissions to let web application write entries in System's "Event Log" .The following are the lines of code i added in web.config files:
<securityPolicy >
<trustLevel name="Full" policyFile="internal" />
<trustLevel name="CustomMedium" policyFile="customWeb_mediumtrust.config"/>
</securityPolicy >
<trust level="CustomMedium" originUrl=""/>
And here goes the html markups inside of customWeb_mediumtrust.config:
<configuration>
<mscorlib>
<security>
<policy>
<PolicyLevel Version="1">
<SecurityClasses>
<SecurityClass name="EventLogPermission"
Description="System.Diagnostics.EventLogPermission,System,Version=2.0.0.0,Culture=neutral,PublicKeyToken=b77a5c561934e089"/>
</SecurityClasses>
<PermissionSet version="1" Name="ASP.NET">
<IPermission Version="1">
<Machine name="." access="Write"/>
</IPermission>
</PermissionSet>
</PolicyLevel>>
</policy>
</security>
</mscorlib>
<appSettings></appSettings>
<connectionStrings/>
</configuration>
The problem at the moment is that web.config generates the error "invalid syntax" if i include the line: <trust level="CustomMedium" originUrl=""/>. In case i remove the line , site compiles successfully. Did i go wrong any where with the above codes.
View 2 Replies
Similar Messages:
Mar 30, 2011
I use some code to check if people are in a group in Active Directory. If the group has an '&' in it then I run into problems.
DirectoryEntry entry = new DirectoryEntry("LDAP://adserver/CN=" + theGroup + ",OU=Distribution Groups,OU=Accounts,DC=ourdomain,DC=net");
I tried to do
theGroup = theGroup.Replace("&",
"\&");
but it's the same problem.
View 13 Replies
Apr 13, 2013
I am getting the following error on on clikcing checkbox from checkbox list in my project.
Error:
Invalid postback or callback argument. Event validation is enabled using <pages enableEventValidation="true"/> in configuration or <%@ Page EnableEventValidation="true" %> in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager.RegisterForEventValidation method in order to register the postback or callback data for validation.
If i set <pages enableEventValidation="false"/> then on clicking the submit button the information is not saved in database just page is refreshed.
aspx.cs file code:
protected void btnSubmit_Click(object sender, EventArgs e) {
if (con.State == ConnectionState.Closed) {
con.Open();
}
SqlCommand cmd = new SqlCommand(@"insert into MainTable values(@CollegeName,@AffilatedWith,@CollegeType,@Country,@City,@State,@EstablishmentYear,
[code].....
View 1 Replies
Sep 19, 2010
First time using parameters, not having much luck. Keep getting 'invalide syntax near '/' when trying this code.
string strConnString = ConfigurationManager.ConnectionStrings["WebConfigConnectionString"].ConnectionString;
SqlConnection sqlConn = new SqlConnection(strConnString);
SqlCommand sqlComm = new SqlCommand();
sqlComm = sqlConn.CreateCommand();
sqlComm.CommandText = @"DELETE FROM Assets WHERE Image = @/Images/mypic1.jpg";
sqlComm.Parameters.Add("@/Images/mypic1.jpg", SqlDbType.NVarChar);
sqlComm.Parameters["@/Images/mypic1.jpg"].Value = "Image";
sqlConn.Open();
sqlComm.ExecuteNonQuery();
sqlConn.Close();
View 1 Replies
Jul 23, 2010
got this error.solve this?
EVENT # 31890
EVENT LOG Application
EVENT TYPE Warning
OPCODE Info
[code]...
View 1 Replies
Oct 20, 2010
I want log4net to write to my ADO log immediately but it doesn't seem to do it until the application exists, how can I remedy this?
View 1 Replies
Mar 25, 2011
DataRow[] filterRows = ds.Tables[0].Select("Running Status= case State when 'True' then 'Running' When 'False' Then 'Stoped' end Where Active='1' and State='1'");
this is not working showing syntax error syntax error:operand is missing
View 3 Replies
Mar 16, 2010
I tried to use Authentication form with LDAP but when I run my web application I received error: Invalid dn syntax specified. This is my code:
public bool IsAuthenticated(string domain, string username, string password)
{
// string domainAndUsername = domain + @"" + username;
string domainAndUsername = "http://localhost:389
jsmith";
// DirectoryEntry entry = new DirectoryEntry(_path, domainAndUsername, password);// _path = LDAP://localhost:389/dc=example,dc=com
DirectoryEntry entry = new DirectoryEntry("LDAP://localhost:389",domainAndUsername,"rJsmitH");
try
{
Object obj = entry.NativeObject;
DirectorySearcher search = new DirectorySearcher(entry);
search.Filter = "(SAMAccountName=" + username + ")";
search.PropertiesToLoad.Add("cn");
SearchResult result = search.FindOne();
if(null == result)
{
return false;
}
_path = result.Path;
_filterAttribute = (String)result.Properties["cn"][0];
}
catch (System.Exception ex)
{
throw new Exception("Error authenticating user. " + ex.Message);
}
return true;
}
I got exception at line Object obj = entry.NativeObject; and error message is: Invalid dn syntax specified. how can i take a right dn syntax? I tried some domain name such as: LDAP://localhost:389, [URL], ... but I still get this error
View 7 Replies
Sep 9, 2011
i made an upgrade to an existing application (still developed by me), while testing on my development machine, everything worked fine. After migrating to a Test Server(windows 2003 server), users can not test the application, it periodically crashes their session and redirected them to the login page (Forms Authentication). No error is generated and no entry is logged in the windows event veiwer on the server. I also noticed this also happens when they try to access a particular page in the application.
The page contains 50 instance of a user-control. Each of the user-control contains 8 textboxes, 2 labels,1 hidden field and 12 asp.net validation controls. I tried saving a copy of this page from Internet explorer (IE8) on my development machine,its about 2.2MB in size.What may be wrong and what tracing tools can i use on my development machine (since it generates no errors). How can i also reduce the size of the page (noting that the asp.net validation controls generated alot of HTML codes)
View 4 Replies
Jan 15, 2010
I have all application errors sent to my email. I keep getting this:
mysite.com/webresource.axd?d=yacsx7hz0irzn_i7ifr3morrek9u6srdkqxsjvpn3mw1&t=633598204507656250
Padding is invalid and cannot be removed.
[Exception Info]
Stack Trace: at System.Security.Cryptography.RijndaelManagedTransform.DecryptData(Byte[] inputBuffer, Int32 inputOffset, Int32 inputCount, Byte[]& outputBuffer, Int32 outputOffset, PaddingMode paddingMode, Boolean fLast)
at System.Security.Cryptography.RijndaelManagedTransform.TransformFinalBlock(Byte[] inputBuffer, Int32 inputOffset, Int32 inputCount)
at System.Security.Cryptography.CryptoStream.FlushFinalBlock()
[code]....
i googled and read to add machineKey in my web.config <system.web> which i did:
<machineKey validationKey='0EFA95136AEA44850D5CEDDF0CC7502B1A009.....' decryptionKey='E88EB13ADB2C3D395193AA71DBB1E...' validation='SHA1'/>
and added
<pages masterPageFile enableViewStateMac="true" viewStateEncryptionMode="Auto"> to my masterpage.But i keep getting that error.
View 2 Replies
Apr 15, 2010
I am using following code to encrypt and decrypt files. It works fine in windows application but shows an error in asp.net class. It's using Riijandael method.
Error : padding is invalid and cannot be removed
Code:Public Sub EncryptOrDecryptFile(ByVal strInputFile As String, _
ByVal strOutputFile As String, _
) [code]....
View 5 Replies
Feb 19, 2010
I am attempting to use SqlBulkCopy to import data from an XML document. I receive the following error when executing WriteToServer: Invalid cast from 'System.String' to 'System.Guid'
View 1 Replies
Jun 3, 2010
I am using Itext sharp to create a pdf. I am adding an image and I keep getting this error
Request for the permission of type 'System.Security.Permissions.FileIOPermission, mscorlib, ersion=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
it is this bit of code that is causing this
[Code]....
If i comment this out, the PDF builds and no errors are thrown (there is just no image)
I don't understand cause I am am trying to do is read a file.
View 2 Replies
Mar 26, 2010
Sys.Webforms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near ' i have kept button in updatepanel and i am getting this error
View 2 Replies
Aug 8, 2010
I'm having problem in inserting text from a textbox in which user write or copy some text which may contain special characters ( " , . ) etc. If there is any special character it get conflict with CommandText Syntax and generates error in inserting. I want to insert all these characters. How could i do it?
Code:
[code]....
View 1 Replies
Dec 7, 2010
I had Ajax calender and when I selected from it it give me date as (07/12/2010) and when I made space between the year and / it converted to (2010/07/12) and this invalid date so pleas what the error.
View 4 Replies
Apr 5, 2010
I'm getting the error
"System.Security.SecurityException: Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
When trying to access my simply aspx form on our local network. It works fine when debugging using Microsoft Visual studio 2008 however, when I deploy the aspx form on IIS 7.0 I get the error above. The form was working fine until I added a ajax calendar extender. I've also reviewed other posts relating to this one, such as changing<trust level="Full"> with no avail. I have listed a portion of my web.config file below.
<system.web>
<trust level="Full" originUrl=""/>
<compilation debug="false">
<assemblies>
<add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
[Code]....
View 1 Replies
Jan 18, 2010
In code behind getting error: Code:
Dim mySqlSelect As String = "Select distinct GroupName from Vecellio.dbo.GroupsTable where GroupName like %" & prefixText & "% order by GroupName desc" Value of string: Select distinct GroupName from Vecellio.dbo.GroupsTable where GroupName like %A% order by GroupName desc
Error: System.Data.SqlClient.SqlException = {"Incorrect syntax near 'A'."}
View 2 Replies
Mar 12, 2010
I am getting "Access Denied" error when I am trying to write a file on my hard drive (C:/.... xmls/test.xml) from a webservice which is also on my local machine.
The folder structure is like this
AdminApp (Web Folder on C drive)
- WebServices Folder
- TestService.asmx
-Xmls Folder
- Test.xml
I tried following settings in IIS in my efforts to resolve the issue:
- Set anonynmous access checked with my account name and password under "Account Used for anonymous access" alongwith integrated windows authentication checked. I am a admin on my machine.
- Disabled anonymous access with only integrated windows authentication checked. I have identity impersonate = true set in my web.config.
View 4 Replies
Oct 25, 2010
In the past I have always worked from the code behind page in ASP.NET and emitting all of my markup from that area.I am now learning MVC and am working in the .ASPX page directly.
<%= Html.Label("Test") %>
<%: Html.Label("Test")%>
<% Html.Label("Test"); %>
View 1 Replies
Oct 21, 2010
I am trying to implement the Ajax HtmlEditor into my application. I currently am using a regular TextBox to load and save some data to some EMail template files and had to do some work-arounds to get it to accept the HTML Input. I am trying to upgrade it to use the Editor, but as soon as I insert the Editor and do a PostBack, I receive the Security Exception below. There is absolutely no change to the code-behind, so I don't understand the issue. There is so little on Google for the Version 3.5 Editor that I'm stumped. I have Debugging enabled, but it won't give me the Soruce Error either.
Security Exception Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file. Exception Details: System.Security.SecurityException: Request failed. Source Error:
[Code]....
:: REMOVED FOR SIMPLICITY :: Stack Trace:
[Code]....
View 3 Replies
Feb 22, 2011
Here is my code
[Code]....
"fileUpload" is the FileUpload ASP.NET control. The SaveAs method writes the user uploaded file to a specified location on the server. IT WORKS. That tells me that the ASP.NET process has the proper write permission to write to the file.The next line uses an assembly called PdfSharp which you can use to open PDF files and manipulate them. In this case, the line simply opens up the user uploaded file. That is where the error occurs. WTH?
It works on my production machine. It does not work on my local machine. It USED TO. It was never a problem before.So why would it be fine to WRITE to the server, but trying to open a file give an error? Makes no sense. Googling yields a suggestion to put <trust level="Full" originUrl="" /> under <system.web> in web.config. It does not work.
View 3 Replies
Jan 23, 2011
Check out the following: <a href="/test?x=@if (Model.IsTest) { @(1) } else { @(4) }"></a> Is there a better way to write this instead of the @(1) and @(4)?
View 1 Replies
Jun 14, 2010
I am using encryption/decryption logic from the following link: [URL] Code from this page is working but at times, its throwing an error while decyption as 'Length of the data to decrypt is invalid'. I have a very limited knowledge on this topic so I am no able to troubleshoot it further
View 1 Replies
Sep 15, 2010
I am working with a sql server database with about 50 stored procedures. The database and stored procedureswere not created by me. The stored procedures all begin with a number in their name.
Example: 17P_Comsetter
The problem I am having is that if I try and execute the stored procedure at the command line in Query Analyzer,the query analyzer appears not to like that the stored procedure begins with a number. For example:
If I try an run the stored procedure as follows:
EXEC 17P_Comsetter
Then I get the following error message:
Msg 102, ..... Incorrect Syntax near '17'
I am using SQL server 2005. Does anyone know why I am getting this error message?
View 1 Replies
