In certain pages when i try to rediect to a perticular page the Session automaically gets assigned to null, have no idea why is this happening.-No where I'm using Session.Remove or Session.RemoveAll.-Also not even using EnableSessionState="true" or "false" as by default it will always be true, I know...
View 3 Replies
i have 2 page,
1.login.aspx --- 2.welcome.aspx
in my login.aspx im storing username into sesssion as below:
Session["usernm"] = txtUsername.Text;
in my welcome.aspx page
in page_load event
if (Session["usernm"]==null)
{
Response.Redirect("Login.aspx");
}
here if i manulally paste the url ( http://localhost:4125/Loginado/welcome.aspx) it should go to login.aspx for user credentials
but its going directly to welcome.aspx page.
I have a clear button and a textbox in an aspx page. I set the session variable in this page as
String str = Textbox1.Text;
Session["TypeIds"] = str;
and I clear the sessions in a clear button event as
Session["TypeIds"]=null;.
Then when the user types some value in the textbox ,on Response.Redirect on another aspx page, the session variable returns null values.It does not retain its session state. The session state has to be maintained in the next page. Is it because this clear button event and setting explicitly to null creates this problem?
On my development machine, the session state data is retained after a post back to the server. (XP VS 2008) (This is true if running from within VS or if running in browser with localhost.)On the deployed test server, the session state is blank in IE, but works in Firefox. (Svr 2003 IIS 6)Both machines are running the exact same code with the exact same imputs and same web.config. There is no code between the post backs that write to the session state.Newest addition to the server would be the consumption of a WCF web service. Could this be a symptom of something missing on the server(s) when trying to connect with WCF? I could not find any information other than installing the 3.0 framework. I have 3.5 SP1 installed on the test server.
View 2 RepliesOur project contains the folder structure. when I redirect to page in different folder, session automaticaly ends. How can I prevent this?
View 2 RepliesI have an issue of losing an InProc session variable when I call Response.redirect. I have seen a number of posts related to this, but haven't found a solution. My code is essentially:
Session("MyVariable") = "SomeBoolean"
Response.Redirect("NewUrl.aspx", false)
When I try to read Session("MyVariable") on the NewUrl.aspx page, it doesn't exists.
What's odd is that this doesn't typically happen in my local environemnt, but hapens quite often, if not all the time, on the shared server this application resides on. I saw some info about web farms and load balancing which could cause an issue. I am fairly certain this app is not part of a web farm.
A little background, in case there is a better method than using Session State...
I have created the ability for an administrator of this applicationto log in as any other user using a "Skeleton Key" password. When the admin does this, I store a boolean in session which refers to the fact that they are logged in and "Impersonating' another user. This gives the admin additional access that the user would not normally have. Anyhow, that is why I store a sessoin variable.
i have a website and i know that the session expires and it gives me instance of object not set error.
I have a masterpage could i do it in there on page_load?
I have an app that worked perfectly in development (Visual Studio 2008 Dev Server/Vista), was setup to use cookieless sessions in the web.config, which worked fine. Now rolled out into production (win2003/IIS6) configured as a Virtual Directory. But I'm having Null session issues after a button click. The problem doesnt persist in FF but in IE8. I tried to change session state to cookies and cookieless (InProc) with no go.
[Code]....
I am having session null on url routing , I searched the net all solutions are mostly for asp.net 3.5 , am using 4.0.... i dont have modules tag in web.config , i've got httpmodules which doesnt have that property.
View 3 RepliesAt the login page i m using
adminlogin.aspx
Session["Admin"] = txtUserName.Text;
response.redirect("admindefault.aspx");
[code]...
I am creating web application. In that I want to set session timeout (not idle timeout). If a user logged in that time the session time will start and it automatically should detect session timeout the page should redirect to another page. How can I acheive this.
View 2 Repliesis it possible to create a new Session Id using C# and without using a Response.Redirect(...Page ... ). I want to create a new session Id on page load.
Reasons for doing so:
I have a testing application that creates IFrames to act as users. the problem I have is that with Multiple Instances (or Multiple IFrames running the same application "Default.aspx") all IFrame's are using the Same Session ID. I have variables stored in the Session ID that I need to be seperated from IFrame to IFrame. Ex:
IFrame 1 gets passed a query string of a client ID "1"
IFrame 2 gets passed a query string of client ID "2"
WHen the IFrame 2 gets loaded the session state of IFrame 1 inherits the IFrame 2's session's making the Client ID in Session 1 = "2". See what I am getting at?
I want to be able to have each IFrame create its own Session State. I guess there is 2 questions to this, 1.) is it possible to create a new Session State by abandoning the original and by doing so will that abandon both session ID's and just create an ID for both IFrames being the same ID? 2.) How can I do this if it is possible :-)
I have a requirement where i need to download mutiple files as a single zip file.There is linkbutton named HOME as well in the page. when this linkbutton is clicked it should redirect to homepage.aspx. I found a ICSharpCode.SharpZipLib.dll in net and used in my website. Here is the code
[Code]....
With the above code i got the expected result i,e. i can zip the files and save on client system. But the problem is after saving/canceling the zip file if user clicks on linkbutton in the page_load event Session[getdata] became null. there is no data in Session. what might be the problem? Actually it should redirect to homepage.aspx but its going to login.aspx because Session[getdata] is null.
I have a Authorizeclient.aspx.cs page where I set my session value.Authorizeclient.aspx is a blank page. HttpContext.Current.Session["nodeID"]="0". This session value changes from 0 or non zero which depends on the value returned by Database. If no value is returned I assign HttpContext.Current.Session["nodeID"]="0" as the default state else I assign HttpContext.Current.Session["nodeID"]=resolve(nodeID).ToString()
Till this part it works fine as expected. However, I have a requirement that I need to read the nodeID from Session in other application on the same server. I mean this application too is part of the root project where I initially created the Session and set it. The strange thing is the Session["nodeID"] in application gets null "SOMETIMES" Not always. I am trying to read the Session in Page_Load. Sometimes it works fine and sometimes it gets null. Moreover the session object do not die and I can see other keys like Session["Themes"] etc there. The session is in InProc mode and have 20 minutes timeout time.
I have a strange problem with the session. I have global.asax with code in the session_start event. This code calls some code that I have in a helper class. When I first run the project in debug everything is fine. However when I stop debugging and then re-run the project it fails and I have discovered that once the code in the helper class is hit the session is null. If I look in the global.asax session_start code the session is instantiated before it enters the helper class. If I then re-build the project and the re-run it everything works fine again! Why does the session suddenly become null and why does a re-build fix the problem?
View 3 RepliesI have a "one page application" (ASP.NET 3.5, VS 2008, IE7) that uses Default.aspx as it's page, and holds an iFrame within "floating panel" (asp:Panel with extenders).
As the desired behavior is to allow users to reopen the application by refreshing the page,
I added this to the Default.aspx.cs:
protected override void OnPreInit(EventArgs e)
{
if (!IsCallback && !IsPostBack)
{
Session.RemoveAll();
GeoApplication.DAL pDAL = new GeoApplication.DAL();
Session["DALinstance"] = pDAL;
}
}
However, when the iFrame page lifecycle starts, the Session["DALinstance"] parameter is null. I've tried to put some additional parameters and those were null as well.
I have logged in to the application and naviagate to Resource Editor page where it allows user to enter the value and saves to the resource file of the application.
After user clicks save button and navigate to different page the session value becomes null.
If the user navigate to different page without clicking save the session variable has its value
Im trying to use code provide in this link below.http://www.codeproject.com/KB/aspnet/MultipleTabWindows.aspxim trying to have the below code in my master page instead of adding to each page. it works if i add to each page, but when i add to ,master page the session value for "WindowName" is always null.how can i fix this?
<script language="javascript" type="text/javascript">if(window.name != "<%=GetWindowName()%>"){ window.name = "invalidAccess"; window.open("InvalidAccess.aspx", "_self");}</script>public string GetWindowName(){ return Session["WindowName"].ToString();}
If a normal session timeout occurs we could handle the session timeout.
But say we are using a lot of ajax calls, webhandlers etc. How would we catch session timeout here and redirect to error/login page.
I'm using sessions to track user name. I assign Session["userName"] in my login procedure. The sessionn gets timeout in about 15 minutes. What I need to do is, if the session timeouts I need to redirect the page to the Default.aspx page.
How can I do this? Any code example would be great.
This is weird. In my newly developed chat application, when I invoke Response.Redirect, I am losing my session data. What is particualrly odd is that this sometimes seems to occur after a slight delay, so I reach the page, and then the session info gets lost momentarily thereafter. Mostly though it seems to get lost immediately. I have of course googled this issue, but yet to find anything that speaks to my problem. SessionState is in InProc mode. Session state has been working fine for me until this unexpected problem, so everything is configured right. So far the only workaround I can think of is to use a link instead of a button, and use javascript to call a server-side function on onclick to do the work I need to do before the link gets invoked. Messy, and I'd rather not go that way unless there's no alternative.
Just to preempt one red herring, I do use Response.Redirect(<address>, false).
The problem occurs both on the testing and production servers. I'm running ASP.NET 3.5 on IIS7.
We have a web app running .net 1.1 that users must login to access (uses FormsAuthentication). At one point, the user submits a form that is handled by a separate web app on the same website but in a different directory (running .net 2.0 and not requiring authentication). When the user submits the form and is redirected to this other page they have some options including returning to the previous web app.
We need our users to stay logged in to the first web app so they do not have to log in again when returning. This works fine on 3 out of four computers, but the fourth computer is asked to log in when they hit the return button (by reviewing the active cookies we see that when it returns to the original web app, the FormsAuthentication cookie is missing)
why this cookie would disappear on one machine but not the others? I am going through IE settings now but the machine has the problem in IE and Chrome (not sure if this would be a shared setting) If it is an IE setting is there a way to make this work without requiring the user to change their settings and without switching to cookieless sessions?
Here is the authentication part of web.config
[Code]....
And if it makes a difference, the redirect and form action property use a the full path, would using a relative path likely change anything?
I want to use session in thread class but it return null in parent that is the page class.
View 4 RepliesIn my application, session value automatically set into null.In certain workflow only it will set as null (Normally It's able to access value). Example, at the time of login, I will set session values. While, user deleting some entries from drop down list of specifc page,client script will show message like selected entry deleted. After that, flow point will move to master page. There I have to access session variables. It's getting null value. I tried to debug with Quick watch, at the pageload of master page only value set into null (automatically).
View 6 RepliesCan anyone explain to me why this first example works fine but the second, which would use a little less code and in my mind appears to achieve the same result, yet throws a null ref error?
This works ...
if (Session["sid"] == null || Session["sid"].ToString() == "")
{
// session is NOT valid.
}
else
{
// session is valid.
}
This does not work?
if (String.IsNullOrEmpty(Session["sid"].ToString()))
{
// session is NOT valid.
}
else
{
// session is valid.
}
