State Management :: Viewstate Not Being Persisted Across Postbacks On Web User Control?
Mar 5, 2010
1) I found that my viewstate was not being persisted across postbacks for web user controls. I ensured that the Enable Viewstate property was set to true (of the page)
2) The Viewstate isnt being persisted on the 1st postback.
3) However, it is being persisted from the 2nd postback onwards.
I stepped through the code to ensure that the Viewstate had the 2 keys that I was adding on page load. However, on the 1st postback, the viewstate is empty. Everything is ok from the 2nd postback onwards.
[Code]....
View 3 Replies
Similar Messages:
Feb 5, 2011
I am having tough time finding out this reason. I have a web control where i add some variable in viewstate. like viewstate["test"] = "1".
when i post back this viewstate no more exists in collection.
[Code].....
View 1 Replies
Oct 9, 2010
Now here is the weird thing. First i am running it locally on the built in vs2008 web server.I load my control in fine, do a postback from a linkbutton, locally on my machine it all works fine, no issue.However when it goes onto my host, it falls over with the message:
Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request.Now i also load controls dynamically and use postbacks and things in the admin area of the site...and that works fine, however my front end just keeps failing? See the code behing below:
[Code]....
View 1 Replies
Jun 15, 2010
I make a user control with DataList to expose pagining . I choose to use ViewState to save the state of pagining (TotalItems , CurentPage etc) , but it seems the view state of the parent page is not "synchronized" with the one from user control . It's basically the same situation like the example :
I have a dummy user control :
"<%@ Control Language="C#" AutoEventWireup="true" CodeFile="WebUserControl.ascx.cs" Inherits="WebUserControl" %>"
and the code -behind
"public partial class WebUserControl : System.Web.UI.UserControl
{
protected void Page_Load(object sender, EventArgs e)[code]...
The question is, why do I have to click twice to get the right result ...3 . I mean at the first click I still get the value 0 .
View 4 Replies
Jun 4, 2010
I have an application that I am working on. We are experiencing odd outages daily. The outages actually bring down the Virtual Servers (web farm of 4 VMs). The last odd metric before VM becomes inaccessible is that disk I/O is at 100%. While discussing this with the client, an idea was thrown out that I wouldn't have considered because I have never heard of such a thing. The idea was that our immense ViewState (yes I will be working on reducing that in the next release) overwhelmed the server or something and the server needed to start writing the ViewState to a file in a temporary folder somewhere. The thought was that when the server started to get overwhelmed, it would have to queue requests and would run out of memory and need to start using disk.
My application is poorly written and the viewstate is completely overused. However, it works 23+ hours of the day including through peak times without problems. But I have never heard of IIS or ASP.NET writing information to files on the server while queueing requests. I had no answer for this seemingly outrageous theory. Can anyone confirm for me that this is not how ASP.NET (2.0) or IIS are written?
View 1 Replies
Jan 11, 2011
I have problem getting values from viewstate in GetTopThemes.
<asp:ObjectDataSource
ID="sourceGetTopThemes"
runat="server"
TypeName="DBConnection"
SelectMethod="GetTopThemes"
EnableViewState="true"></asp:ObjectDataSource>
[Code]....
}
[Code]....
when the page is not Posted back, I saved all values in the viewstate.
View 2 Replies
Apr 30, 2010
I have been getting this error a lot lately with some of my users, and I had a couple of concerns with view state and I have read so many articles but I am still lost..
1. I use masterpage on all the pages and I need viewstate for some of the pages but..
There is a page where a user will fill out the information and then submit this data to a cgi server, and it is where I get most of the Client Disconnected errors, what would happen if I disable viewstate when they click on that button?
Now when a user browses from one page to another, does the view state from the previous page get deleted? If not how would I delete it?
Does the master page have its own viewstate? Would I be able to make sure none of items on my master page are using the viewstate?
View 7 Replies
Sep 1, 2010
We have a web site that implements a custom SiteMapProvider using a User Control added in the master page. I need to be able to limit the sitemap nodes added depending on the logged in user, that is, certain users should not see certain sitemap nodes. Currently, the login processing code determines if users are in the certain category or role and then sets a value in session state, for example, Session["UserInRoleXXX"] = "Yes"; I tried changing the code in the user control to check the session state, but I got the following error: NullReferenceException ... Object reference not set to an instance of an object." Can session state be accessed in a user control?
View 6 Replies
Oct 29, 2010
I have a composite control that has a couple of private fields that reference values in the cache and these private fields are called during the constructor method. Since a string key is used to identify the value in the cache, I must have a way of storing that string key in such a way that it is available at the time the control is instantiated, and I have to be able to reference it on postbacks without it changing.
In addition, this key is generated the first time the control is loaded, but it should not be changed again after that first time.
How can I accomplish this?
I have already tried saving it to viewstate, but that doesn't work because viewstate is not yet available at the time the control is instantiated.
I have tried using a private field and then checking against Page.IsPostback in the constructor and if it isn't postback, I assign a value to the private field, but on subsequent postbacks it looses it's value, and I can't reassign it in the Page.IsPostBack again because it is an autogenerated GUID.
View 3 Replies
Aug 24, 2010
I want to know that when we create custom controls, then is there State Management through ViewState done automatically or we have to handle it explicitely ?Since i have created Custom Controls that is behaving as if it is not maintaining its state on PostBack.
View 9 Replies
Oct 12, 2010
how can DropDownList attributes be persisted accross page Postbacks?
Example:
DropdownList1.AutoPostBack = True
DropdownList1.items(0).Attributes.Add("Attribute1","somevalue")
On Postback the attribute is no longer available (ie. attributes.count=0).
I tried persisting using the code below, but was unsuccessful:
Before PostBack: ViewState.Add("DDL","DropdownList1")
On PostBack: DropdownList1 = ViewState("DDL")
This generated the error: DropDownlist is not marked as serializable.
I than tried:
Before PostBack: Session.Add("DDL","DropdownList1")
On PostBack: DropdownList1 = Session("DDL")
This did not err but attributes were still not available.
View 4 Replies
May 20, 2010
I start with a blank ASP.NET page where I disable ViewState for the whole page with EnableViewState=False and even ViewStateMode=Disabled.keep adding various controls to the page -- Label, Table, Calendar, TextBox, DropDownList.Everything looks good, i.e. my __VIEWSTATE tag fluctuates between 24 and 28 characters.As soon as I add a single RadioButton (or CheckBox), the __VIEWSTATE shoots up to 130 characters. And it keeps growing by over 100 characters every time I add another RadioButton.
View 19 Replies
Apr 19, 2010
I have a code like this in the Me.LoadComplete event.
[Code]....
Now I would like to set this viewstate("data") = nothing on a certain button click in a user control (.ascx) in this page but it doesnt clear the viewstate. What am I doing wrong? In the onClick even of the button in the .ascx I write Me.viewstate("data") = Nothing
View 4 Replies
Jul 22, 2010
I want to use textbox value after I visit from current to other page then again to current page using viewstate but value should be the one when I was current page last time.
View 3 Replies
May 3, 2010
I am creating a simple string of values that get added to a label after a post back. I am setting the values thorugh ViewState. However, my appended values do not get updated until AFTER the 2nd postback. Example:
On Page_Load the label displays a "0";
If I enter a "1" in the text box and click the button the label still displays a "0";
If I click the button again (the 2nd postback) then my label correctly displays "0,1"; This works for whatever value I enter after. i.e. "0,1,35,hello world", etc.
What I am I missing? Code Below.
.ascx - I left out inherits and codebehind
[Code]....
View 4 Replies
Dec 22, 2010
have some viewstate value in my opener window ,when i close the popup i want to set new value in the opener viewstate.
View 3 Replies
Aug 6, 2010
I have a aspx page and there is a web user control that must load dynamically with the data related to the aspx page....
ok so I want to use a querystring and pass it to the web user control.....how do I do this?
then also how do I pass a querystring from a web user control back to a aspx page?
This is a question I always had...and therefore never actually started to use the web user control
View 5 Replies
Sep 8, 2010
I have created a custom control that extends the class ImageButton, the thing is that I now also want to save this control to a viewstate.
View 4 Replies
Oct 25, 2010
how save int array in viewstate?
View 4 Replies
Sep 16, 2010
I am developing a a web application of a general store where the operator has to enter the things what customer has purchased. Like daily usage item,or anything. So I have form in which I first ask how much item u wannt to register...(if he has 20-30 number of items then operator will enter 20-30 then in gridview 20-30 item are opened. With bind dropdownbox containing name of item ,then textboxs containing mrp, value, stock avail of that item. Here is the link for demo. [URL]. Problem is suppose the operator enter the value above 20, then viewstate size id about 1.50Mb that's too heavy.
[Code]....
Here is .cs code
[Code]....
View 1 Replies
Jan 31, 2011
I stored a list<mytype> object in a viewstate. Type of list<mytype> comes from a public structure which is defined at page.
When I try to convert viewstate to a list<mytype> object it cause error.
Public struct mytype
{....}
Page_load()
{ list<mytype> obj = new list<mytype>();
viewstate["mystate"]=obj
}
My_function(){
list<mytype> tempobj = new list<mytype>();
tempobj = (list<mytype>)viewstate["mystate"];// this line cause error !
}
View 5 Replies
May 27, 2010
I want to store List<Class> object to ViewState, when i try to do this than its giving me error to make class serialize,but my class is partial class so didn't get serialize keyword on class how can i store List object to viewstate.
View 4 Replies
Jan 3, 2011
i want to store IQueryable value to ViewState. my code is as below:
Private
Property _Query()
As IQueryable
Get
Return
CType(ViewState("_Query"), IQueryable)
End
Get
Set(ByVal value
As IQueryable)
ViewState("_Query") = value
End
Set
but when i run my page i get following error:
Type 'System.Data.Linq.DataQuery`1[[DynamicQueries.VW_EmployeeProfile_Filter, DynamicQueries, ersion=1.0.0.0, Culture=neutral, PublicKeyToken=null]]' in Assembly 'System.Data.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' is not marked as serializable
what should i do to get rid of this error. previously i was doing like this:
Private Shared _Query As IQueryable
but problem is that in Multi users environament, Shared variable is making problem, that is why i want to store it in ViewState.
View 4 Replies
Feb 28, 2011
As you know viewstate can recognize as a vulnarable item if we do not encrype it I know how to encrype the viewstate that I define in a web page but my problem start from here I downloaded a software which help you to exract the unencrypted viewstate of every website the link of that software is as follow:
[URL]
but when I make even empty page without viewstate ,this program can extract the viewstae of my page but if check some website like google ,yahoo,amazoon
View 15 Replies
Dec 29, 2010
In our control environment, we've started, somewhat intermittently, getting:
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
on our website.It also suggests:
Source Error: The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %> or:
2) Add the following section to the configuration file of your application:
<configuration>
<system.web>
<compilation debug="true"/>
</system.web>
</configuration>
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
We already have compilation debug as true. We have upgraded our website to ASP.NET 4.0, although our middle tier components are still at 3.5. As we do in out production machine configs (which are using ASP.NET 3.5) we have
<section type="System.Web.Configuration.MachineKeySection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=abcabc123123" allowDefinition="MachineToApplication"/>
we also have one in the new .NET 4.0 machine.config:
<section type="System.Web.Configuration.MachineKeySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=abcabc123123" allowDefinition="MachineToApplication" />
This control environment is not in a server farm. Why is it suggesting that I turn on debug, when it's already on. Why isn't it showing me my source code?
View 1 Replies
