Stop Index Outside Bounds Of Array (VB) With No Looping?
Feb 8, 2010
I know exactly what causes this, but have been unable to find a solution that doesn't involve looping. I've created one DataTable and numerous DataViews of said DataTable, with each DataView bound to a control. A dynamically created array controls how the dataview rows are filtered, but I have a hard coded number of DataViews. If the number of Dataviews is greater than the number of elements in the array, the code errors out with "Index was outside the bounds of the array". And it should, because it is outside the array. I would just like to check if the element exists before I attempt to use it. Code looks like this (where eid is dynamically created array of employee ids):
dv0 = New DataView(grpData)
dv0.RowFilter = "employee_id = " & eid(0) & ""
DayPilotCalendar1.Visible = True
DayPilotCalendar1.StartDate = New DateTime(2010, 2, 3)
DayPilotCalendar1.DataSource = dv0
DayPilotCalendar1.DataBind()
What I need is something like this:
If (not array.exists(eid(0))) then
dv0 = New DataView(grpData)
dv0.RowFilter = "employee_id = " & eid(0) & ""
DayPilotCalendar1.Visible = True
DayPilotCalendar1.StartDate = New DateTime(2010, 2, 3)
DayPilotCalendar1.DataSource = dv0
DayPilotCalendar1.DataBind()
End If
I don't need to know the values of anything in the array, I just need to not use eid(4) if the last element in the array was eid(3), if that makes sense. array.exists may not be in any way what I need here. It is just an example of how I would like it to work. If array.exist does happen to work, I haven't found the right syntax.
View 2 Replies
Similar Messages:
Apr 2, 2011
Index was outside the bounds of the array.
private void PopulateWallPosts(string userId)
{
using (OdbcConnection cn = new OdbcConnection("Driver={MySQL ODBC 3.51 Driver}; Server=localhost; Database=gymwebsite2; User=root; Password=commando;"))
{
[Code].....
View 1 Replies
Jun 8, 2010
Exception Details: System.IndexOutOfRangeException: Index was outside the bounds of the array.
Source Error:
[Code]....
Source File: C:le4-29-2010LinkExchangeradminpurge_banned_sites.aspx.vb Line: 26 I am confused. Why is this happening? I need an array of integers for 2 columns for later on when I go back and perform clean up. Both are primary keys for two tables. Why is thing tripping at my first record?
[Code]....
View 4 Replies
Jun 24, 2010
I have it working on many other pages on my site, i created a new page and setup like the other pages adn on this page getting error.
[Code]....
Index was outside the bounds of the array.
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IndexOutOfRangeException: Index was outside the bounds of the array.
View 6 Replies
Sep 14, 2010
i create registration form in asp.net & sql server..after fill up form when i click save button it's show error..here is my code :-
private void ExecuteInsert(string AccNo, string CompanyName, string Desc2, string RegisterNo, string Address1, string Address2, string Address3, string Address4, string PostCode, string DeliverAddr1, string DeliverAddr2, string DeliverAddr3, string
[code]...
View 3 Replies
Jan 12, 2011
i am fighting alot with reorderlist today. So far, i seem to be loosing. I can't seem to get it to work, when i bind directly to my sqldatasource. Instead, i have tried to feed it a datatable, and bind on pageload. BUT, when i do a reorder, that affects the 1st entry in the list, it tells me the index was outside the bounds of the array.
View 2 Replies
Jan 5, 2011
I'm trying to merge vintasoft barcode sdk with my data access dll and it's not working after ilmerge.
here is the error:
IndexOutOfRangeException: Index was outside the bounds of the array.]
2.┌.©(Byte[] param0) in :0
2.┌..cctor() in :0
[code]...
View 2 Replies
Feb 19, 2010
I'm trying to update a gridview using checkboxes (to allow user to remove multiple rows if needed)
In my Page_Load I have:
[Code]....
And then I have a UPDATE button that runs the following code:
[Code]....
View 3 Replies
Jan 6, 2011
I am developeing web application using csharp. The the code is reading the text file load on to Gridview, but when I run the the code it is giving me the error as "Index was outside the bounds of the array."Where I am going wrong. The code and records are as follows:
[Code]....
Records on Text File
6/5/2010,Bun,2010,H,20,50040
6/5/2010,BUG,2010,G,26,90000
16/5/2010,COT,2010,B,26,45040
View 7 Replies
Jan 11, 2010
[Code]....
Stack Trace:
[Code]....
[IndexOutOfRangeException: Index was outside the bounds of the array.] _Default.SortDropDownList(DropDownList ddl) +107 _Default.Submit_Click(Object sender, EventArgs e) +111 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746
View 1 Replies
Apr 13, 2010
I have a problem with my site created with Share Point Portal. This morning I launched a specific link I came out this error: Index was outside the bounds of the array.Server Error in '/_layouts/incident' Application. Index was outside the bounds of the array. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IndexOutOfRangeException: Index was outside the bounds of the array. Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[IndexOutOfRangeException: Index was outside the bounds of the array.]
Incident.ActionResponse..ctor(SPListItem item) +290
Incident.ActionResponseCollection..ctor(SPWeb web) +96
Incident.Incident.Page_Load(Object sender, EventArgs e) +1089
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET
Version:1.1.4322.573
View 5 Replies
Jan 23, 2011
I have a simple application with a GridView bound to a LinqDataSource and a DetailView that displays a row from the GridView when it's selected. This works as expected. But now I'm placing the GridView and DetailView in separate TabPanels in an asp.net ajax Tab Control.
<asp:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server">
</asp:ToolkitScriptManager>
<asp:TabContainer ID="CourseFinder" runat="server" ActiveTabIndex="0">
<asp:TabPanel ID="ResultsTab" runat="server" HeaderText="Results" >
</asp:TabPanel>
<asp:TabPanel ID="DetailTab" runat="server" HeaderText="Detail">
</asp:TabPanel>
</asp:TabContainer>
and my code behind file
protected void Page_Load(object sender, EventArgs e)
{
CourseFinder.Tabs[0].Controls.Add(Results);
CourseFinder.Tabs[1].Controls.Add(DetailsView1);
}
When I run the page I'm getting
[ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index]
System.Collections.ArrayList.get_Item(Int32 index) +7483656
System.Web.UI.WebControls.GridViewRowCollection.get_Item(Int32 index) +13
_Default.Results_SelectedIndexChanged(Object sender, EventArgs e) in c:Documents and
SettingsAdministratorMy DocumentsVisual Studio
2008WebSitesWebSite1Default.aspx.cs:35
The line of code getting the error is the one attempting to get the SelectedIndex from the GridView and update my DetailView.
GridViewRow row = Results.Rows[Results.SelectedIndex]; I stepped through the code with the debugger and SelectedIndex is not negative and it's not larger than the number of rows in the GridView. So I'm confused why simply placing the controls inside a Tab is causing this error?
View 2 Replies
Jul 20, 2010
I want to read all the strings from a resx file and load it into an array without looping. I'm working in an asp.net web application and i'm using C#. How can i get the strings?
View 1 Replies
Feb 24, 2010
im having some problems with jagged arrays stored in session for ASP.net i have some code which creates a jagged array, them populates, and then stores this populated jagged array into session
protected string[][] answersJArray;
answersJArray[0] = new string[4]("test","test1","test2","test3"};
answersJArray[1] = new string[4]("test","test1","test2","test3"};
Session.Add("answersJArray", answersJArray);
how would i loop through each jagged array in the session ?? if they were not in session i no i could do the following
for (j = 0; j < answersJArray[1].Length; j++)
{
label.Text = (answersJArray[1][j].ToString());
}
how would i do the above by looping through the session ??
View 2 Replies
Nov 30, 2010
I have a datareader that i loop through comparing the values of the reader to the ones i got in an (from the start, empty) array, as i do this i want to put either a new post in the array or update an existing post depending on if i found a corresponding value or not. The datareader and array both contains name and value.
First i tried to declare a regular multidimensional array, but they are fixed size so that seemed like a bad idea, next thing i tried was creating an arraylist but they seemed to lack support for multidimension. I'm a bit lost on what to use.
[Code]....
View 1 Replies
Oct 28, 2010
I have a one-d Array named zz containing {5,3,8,1,9,6}. Current order of indices of the elements is : 0,1,2,3,4,5.
Now I want to sort the array z in ascending order in such a way that its corresponding indices also sort according to its respective elements.
Ex: Elts in Ascending order : 1,3,5,6,8,9
and Respective indices will be : 3,1,0,5,2,4.
Another Ex: What "Additions" should i make to the following code, if the Array Element repeats ?? Epected Oreder of Indices : 1,0,4,3,2
[code]....
View 3 Replies
May 28, 2010
I have an array (arr_list) with 5 items
item1 = "OCS"
item2 ="RIV"
item3 = "ESC"
item4 = "SND"
item5 = "MNT"
The week of 12/28/2009 to 1/4/2010 was assigned the first item of that array and the following 4 weeks were assigned the next 4 values of the array. so every monday of each week, the value should change.
my question is how do I get the next array assignment based off of the current date and have it keep the same order since 12/28/2009.
I think I need a loop but not sure how to make it happen.
View 3 Replies
Sep 16, 2010
This is my code for checking the spelling written in text box is correct or not.
But it is not working, it is not executing and if (readingPos[k] == TextboxPos[k]) in this line giving error index is out of bond array.
protected void Button2_Click(object sender, EventArgs e)
{
string j = TextBox1.Text;//TextBox1.Text =
_dictionary(j) ;
}
public string _dictionary(string word)
{
string[] wordArray = new string[125896];
string reading;
int nwords = 0;
FileStream fs = new FileStream(@"C:Documents and Settingsharsha.limayeDesktopspelling.txt", FileMode.Open, FileAccess.Read);
StreamReader s = new StreamReader(fs);
while((reading=s.ReadLine())!=null)
{
char[] TextboxPos=reading.ToLower().ToCharArray();
char[] readingPos = new char[20];
readingPos = TextBox1.Text.ToLower().ToCharArray();
if (TextboxPos[0] == readingPos[0])
{
//int[] save = new int[20];
int save = 0;
for (int k = 1; k < reading.Length; k++)
{
if (readingPos[k] == TextboxPos[k])
{ }
else
save += k;
}
if (save !=0 && save < 3)
{
TextBox1.Text = "Search for this" + reading;
break;
}
}
wordArray[nwords] = reading;
nwords++;
}
View 2 Replies
Aug 19, 2010
I need to know what would be the best choice of array to use given the following specifications. This array's size will be predermined upon the loading of the appication. All I want to do is be able to add values to this array and replace preexisting array items with new values without the array changing size. Someone suggested that I use a Dictionary Array Object? I would appreciate any suggestions.
View 3 Replies
Apr 1, 2010
I have an intranet application which I have been putting together with ASP.NET. I have been using VWD 2010 Beta 2 which has been fine so far. But when I go to deploy the work i've done so far to a local IIS a variable which is supposed to be; being filled with the value from HttpContext.Current.User.Identity.Name is not being filled i.e. an error occurs when substring goes out of bounds. I believe it is because the HttpContext.Current.User.Identity.Name is not putting a value into the string variable 'username'. But it is quite strange as when I run the website project within VWD 2010 it works fine without any errors. IIS is set to Integrated Windows Authentication and Annonomous Users are allowed.
public static String getName()
{
// Store username
String name = HttpContext.Current.User.Identity.Name;
// Truncate username from domain name
String[] substring = new String[1];
// Define the token at which the string will be broken at
char[] token = { '\' };
// Split the string
substring = name.Split(token);
// Return the username
return substring[1];
}
Any ideas why when running the exact same files from local IIS gives me errors?
View 2 Replies
May 12, 2010
Iam getting an array of list from database to client side(javascript array). Now my aim to place those values in a div one by one and that div should attach to the textbox similar to Autocomplete extender.
View 4 Replies
May 14, 2010
I'm working on a project where we're using Windows Desktop Search (WDS) to index files on a web share and then later allow the user to search via a website for documents in the share.
These documents are transferred to the share via FTP, however it would seem that either the computer never goes idle to index or at some point the indexing stops. Is there a way from the command line or within the program itself to force this to happen without having to re-invent the wheel? Using .NET 3.5 and C#.
View 1 Replies
Feb 26, 2010
Here is my code in SQL
[Code]....
Error i am facing is :
Msg 8668, Level 16, State 0, Line 2
Cannot create the clustered index 'RateViewIndex' on view 'NoteToPass.dbo.RateView' because the select list of the view contains an expression on result of aggregate function or grouping column. Consider removing expression on result of aggregate function or grouping column from select list.
View 1 Replies
Feb 2, 2010
what is difference in cluster index and noncluster index?
which is faster?how many cluster index and non cluster index per table?
what is composite primary key?on how many columns we can create composite key?
hao many maximum composite key's we can create on one table?
View 2 Replies
Aug 12, 2010
how to pass a C# ASP.NET array to a Javascript array? Sample code will also be nice.
Let's say for simplicity that in my aspx.cs file I declare:
int [] numbers = new int[5];
now I want to pass "numbers" to the client side and use the data in the array within javascript. How would I do this?
View 4 Replies
