Syntax Error Converting The Nvarchar Value To A Column Of Data Type Int?
May 5, 2010
I have 1,2,3,4,5,6,7,8,9 stored as nvarchar inside Level in my db.
I then have a dropdownlist with values 1,2,3,4,5,6,7,8,9. When a user makes a selection (i.e 1) (Level.SelectedValue.ToString). This builds an sql query via a param like this:
"Select things From MBA_EOI Where level = 1"
When I run the select I get the following error:
Syntax error converting the nvarchar value '1,2,3,4,5,6,7,8,9' to a column of data type int.
I was under the impression that I was dealing with an Nvarchar field and the selected value as string, where does the int conversion come in?
p.s I have also tried Level.SelectedItem.ToString
View 1 Replies
Similar Messages:
Feb 28, 2011
I am using an adapter to get a list with IN where clause as:
[Code]....
I passed the parameter, CatIDList, with string value 1, 2, 3, 4, 5
However, it returns error of Error converting nvarchar value.
View 3 Replies
Nov 30, 2010
Here is the code:
[code]....
After I try to test the page, I am getting the following error:
System.Data.SqlClient.SqlException:
[b]Error converting data type nvarchar to float. [/b]
[code]....
View 1 Replies
Jan 6, 2010
when i am trying to uedit my recods in gridview this error is coming. I am using SQLDatasource with gridview and for edit purpose i am using stored procedure. I have manually executed the SP and its woring fine. my SP is here
[Code]....
and my SQLDataSource is here
[Code]....
and gridview is here
[Code]....
View 2 Replies
Mar 28, 2011
I have a query in SQL Server 2008:
[Code]....
Everything looks fine but I keep getting the error: 'Conversion failed when converting the nvarchar value 'xxxx' to data type int... where xxxx is the the value of @Query.
View 3 Replies
May 7, 2015
how can in sql server show two columns as one column.. one of them is nvarchar and the other is int from two tables i have did this but it give error
select depart.depart_name+input_comp.no_of_depart as department,dbo.depart.depart_id from dbo.depart inner join dbo.input_comp on dbo.depart.depart_id=dbo.input_comp.depart_id group by depart.depart_name,dbo.depart.depart_id,input_comp.no_of_depart
the depart_name is nvarchar datatypeand the no_of_depart is int datatype
the error is
Conversion failed when converting the nvarchar value to data type int.
View 1 Replies
Jan 24, 2016
I'm getting the following error base on dropdownlist selectindexchanged: error converting data type nvarchar to bigint
Below is my dropdownlist code:
Protected Sub ddlTaxName_SelectedIndexChanged(sender As Object, e As EventArgs) Handles ddlTaxName.SelectedIndexChanged
Dim strConnString As String = ConfigurationManager.ConnectionStrings("BytConnectionString").ConnectionString()
Dim strQuery As String = "select TaxName, [Rate(%)] from Sale_Tax where" & " TaxID = @TaxID"
Dim con As New SqlConnection(strConnString)
[Code] .....
View 1 Replies
Nov 6, 2013
protected void Update(object sender, EventArgs e)
{
foreach (GridViewRow row in gvStudeff.Rows)
{
[Code].....
View 1 Replies
May 7, 2015
I am using a viewstate to store the company Ids and splitting at hyphen.
protected void onCompanychange(object sender, EventArgs e) {
ViewState["companyID"] += companydropdown.SelectedValue + "-";
String companyids = ViewState["companyID"].ToString();
string pattern = "-";
company_array = Regex.Split(companyids, pattern);
company_length = company_array.Length;
}
Company array is a string array where i have stored the company ids
the problem is company_array[0] has the initial value of the dropdownlist(company) --select company which is why m getting the error(cannot convert data type nvarchar to int) . I have used the same logic in many places in my project it did not give any error.
int count = 0;
company_length = company_length - 1;
while (count < GridView3.Rows.Count && compid_counter < company_length ) {
cmd = new SqlCommand("insertWorkDetais", conn);
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.AddWithValue("@trainerId",trainerID);
[Code] .....
View 1 Replies
Jul 14, 2010
I have been messing about with this for hours surely this should be an easy task ....... I have a stored procedured that creates a invoice on a Quotetable one of the parameters is a output parameter Invoice Number this is passed to a label. (Label1) This works great.
I then need to add items to the invoice on a item table so my next stored procedure should take the value of Label1 and update the foreign key quotenumber on the itemtable with the value from label1.
On the aspx page I have a small section for a gridview which shows the current quote with however many items on it using the control
[Code]....
On the ASP page the control for @Quotenumber = Label1 but I get the following error
'Conversion failed when converting the nvarchar value 'Label' to data type int.'
View 3 Replies
Nov 1, 2010
I am using the abobe code to encrypt and decrypt a query string ID number.Any ideas to how to make this work with id numbers?Bellow is the code and store procdure.
[Code]....
View 1 Replies
Mar 29, 2010
I get this error when I am trying to concatenate the two fields in bold into one field for a datagrid.
select count(cp.iOwnerID) as enrolled,(duration + '' + duration_interval) AS Duration ,session_id,school_id as SchoolId,program_id as ProgramId,convert(nvarchar(10),session_start_date,101) as SessionStartDate, session_class_size as SessionClassSize from dbo.cnSchoolProgramSessions cn with (nolock) left join customerproduct cp on convert(datetime,convert(nvarchar(10),session_start_date,101)) = convert(datetime,convert(nvarchar(10),cp.dtPurchasedate,101)) where record_status = 1 and school_id = '" &
iSchool & "' and program_id = '" & iProgram & "' and (CP.chProductNumber = '" & Me.Label5.Text & "' or CP.chProductNumber IS NULL) group by session_id, school_id, program_id,session_start_date,session_class_size,duration,duration_interval
View 9 Replies
Nov 10, 2012
i am getting this error this my c# code
Collapse | Copy Code
string Patient_name = NameTxtBx.Text, Export_TO = ToTxtBx0.Text;
int PatNoVal;
PatNoVal = Convert.ToInt32(PatNo.Text);
PatNoVal = int.Parse(PatNo.Text);
decimal PatID = decimal.Parse(PatID_NO.Text);
[Code] .....
View 1 Replies
Feb 1, 2011
I want to change one of my table columns data type. Now the column data type is varchar and i want to change it to float. Updated all the column data to numeric and tried to convert the datatype with the following syntax
alter table vibration_values alter column dis_v float
but getting the error as
Error converting data type varchar to float.
The statement has been terminated.
Suprisingly every thing worked well in sqlserver 2005 and not working in sqlserver 2000.
View 6 Replies
Oct 1, 2010
this code is giving me error:
error in converting datatype nvarchar to bigint this is my table values:
@customer_first_name nvarchar(50),
@customer_last_name nvarchar(50),
@customer_address nvarchar(max),
@gender nchar(10),
@date_of_birth datetime,
@customer_email_id varchar(50),
@customer_occuption varchar(50),
@customer_phone_number Bigint,
@nominee_name nchar(50),
@customer_id nvarchar(50),
@account_type nvarchar(50),
@account_number nvarchar(50),
@transfer_access_code nvarchar(50),
@account_balance Bigint,
@pin_code BigInt,
@nationality nvarchar(50),
@password nvarchar(50)
lblAmount.Text = HFamount .Value ;
int balamount = Convert.ToInt32(lblAmount.Text);
int Cpincode = Convert.ToInt32(txtpincode.Text);
long phone = Convert.ToInt64(txtphone.Text);
string cust_id = CUSTOMER_ID_GENERATOR();
string strconstring = ConfigurationManager.ConnectionStrings["ONLINE_BANKING2_ConnectionString"].ConnectionString;
SqlConnection mycon = new SqlConnection(strconstring);
mycon.Open();
SqlCommand cmdRegister= new SqlCommand(sqlquery,mycon);
cmdRegister.Parameters.Add(new SqlParameter("@customer_first_name",txtcustname.Text.ToString()));
cmdRegister.Parameters.Add(new SqlParameter("@customer_last_name",txtcustlastname.Text.ToString()));
cmdRegister.Parameters.Add(new SqlParameter("@customer_address",txtAddress.Text.ToString()));
cmdRegister.Parameters.Add(new SqlParameter("@gender", rbtngender.SelectedItem.Value.ToString()));
cmdRegister.Parameters.Add(new SqlParameter("@date_of_birth", txtDOB.Text));
cmdRegister.Parameters.Add(new SqlParameter("@customer_email_id", txtemail.Text.ToString()));
cmdRegister.Parameters.Add(new SqlParameter("@customer_occuption", txtcustoccupation.Text.ToString()));
cmdRegister.Parameters.Add(new SqlParameter("@customer_phone_number", phone));
cmdRegister.Parameters.Add(new SqlParameter("@nominee_name", txtnominee.Text.ToString()));
cmdRegister.Parameters.Add(new SqlParameter("@customer_id", cust_id));
cmdRegister.Parameters.Add(new SqlParameter("@account_type", accType.SelectedItem.Value.ToString()));
cmdRegister.Parameters.Add(new SqlParameter("@account_number", ACCOUNT_NUMBER_GENERATOR()));
cmdRegister.Parameters.Add(new SqlParameter("@transfer_access_code",Transfer_code()));
cmdRegister.Parameters.Add(new SqlParameter("@account_balance", balamount));
cmdRegister.Parameters.Add(new SqlParameter("@pin_code", Cpincode));
cmdRegister.Parameters.Add(new SqlParameter("@nationality", DropCountry.SelectedItem.Value.ToString()));
cmdRegister.Parameters.Add(new SqlParameter("@password",txtpasswd2.Text.ToString()));
cmdRegister.ExecuteNonQuery();
mycon.Close();
View 1 Replies
May 3, 2010
I have this SqlDataSource:
[Code]....But when I click Button Update this error occurred:
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near 'nvarchar'.
View 5 Replies
Aug 20, 2010
Scenario: If you create a table with a column of type nvarchar, populate it with some content and try to modify it using the WebMatrix editor, from nvarchar to ntext, it does not display any error message or warning that this is not possible. It silently saves and reverts the change, back to nvarchar. Wasted some hours on this issue as I thought my column was ntext, but in fact was still nvarchar.
Expected behavior: It should change to ntext, or if SQL CE doesn't support that, it should notify the user that no change was applied.
View 1 Replies
May 7, 2015
I am trying to insert a value in database from a dropdownlistddlvaue = 10.00 - 11.00in db asstarttime=10:00:00endtime=11:00:00using split function
string dropdownvalue = ddlduration.SelectedItem.Text.ToString();
string et = dropdownvalue.Split('-')[1].ToString();
endtime = et.Split(' ')[1].ToString();
starttime = dropdownvalue.Split(' ')[0].ToString();
I am joining date value + time value in the query uisng('" + datevalue + "' + ' ' + '" + starttime + "')
'2014-05-15' + '16.00' --> to get 2014-05-15 16:00:00
it is getting inserted successfullybut while selecting and viewing it from the database I am getting error as,
"Arithmetic overflow error converting expression to data type datetime"
If i mannually enter the date in db it is workingmanuall value=2014-09-30 14:00query value =2014-09-30 14:00
both are same but error is only occuring for query inserted value
View 1 Replies
Aug 31, 2010
This is the code i have used to get LocationID from database with MerchantID. I am getting an exception from Fill dataset part. The error is Error converting data type varchar to bigint.
public DataSet getLocationID(long MerchantID)
{
//long LOCID = null;
try
{
SqlParameter[] parameters = new SqlParameter[]
{
new SqlParameter("@merchantID",MerchantID)
};
string strCommandText = "Select LocationID from Merchant_Location where MerchantID ='@merchantID' order by LocationID ASC";
Debug.WriteLine(strCommandText);
DataSet pds = new DataSet();
SqlHelper.FillDataset(DbConnString, System.Data.CommandType.Text, strCommandText, pds, new string[] { "LocID" }, parameters);
return pds;
}
catch (Exception ex)
{
//LogError("Error Occurred When Retrieving LocationID: " + MerchantID.ToString(), ex);
return null;
}
}
View 2 Replies
Feb 24, 2010
i want to bind my table to the datagridview in VB.net windows form (not in asp.net). but when i try to bind and run the applicatiion i got the following error "syntax error converting datetime from character string". my table contains two date filed"pdate","date" which contains the date in the followingg format"2010-02-01 00:00:00.000 i want to bind this date fileds to datagrid view.
View 2 Replies
Jan 3, 2011
I am gettinga syntex error. Is Primary field is a bit data type in the database.
<asp:TemplateField HeaderText="IsPrimary">
<EditItemTemplate>
<asp:CheckBox runat="server" ID="chkIsPrimary" Checked='<%# Eval("IsPrimary").ToString() == "1"? true : false %>' />
</EditItemTemplate>
</asp:TemplateField>
View 7 Replies
Jan 16, 2010
I have a website having an aunthentication system. When I am setting my website on IIS 6 the code is absolutly working fine. But when i configure the website on IIS 7 (Windows 2008 server) it is showing me the above error. I am using a stored procedure for it
View 3 Replies
Aug 21, 2010
how can specified nvarchar data type without N''?
View 2 Replies
Feb 15, 2010
First of all im new to asp.net and am in the process of learning it.
Heres my problem, i am receiving this error when submitting the form: "Arithmetic overflow error converting numeric to data type numeric"
And it halts at command.ExecuteNonQuery();
Input form:
[Code]....
Code Behind:
[Code]....
Stored Procedure:
[Code]....
View 11 Replies
Jun 29, 2010
I am getting an error when attempting to call a stored proc from my asp.net page.
e.Message = "Conversion failed when converting character string to smalldatetime data type."
The stored proc is being called by:
The asp.net code that is calling the stored proc is:
//Display search results in GridView;
SqlConnection con = new SqlConnection(strConn);
//string sqlItemSearch = "usp_Item_Search";
SqlCommand cmdItemSearch = new SqlCommand(sqlItemSearch, con);
[Code]....
View 5 Replies
