Update A User Control From A User Control?
Mar 12, 2010
I'm struggling with the following problem and would some guidance.
I have 2 user controls, say UC_Master and UC_Child both of which sit on the same aspx page. The child control requires data to be passed from ucMaster.
I have a similar set up already on the page and for that I just expose the relevant properties in the child and reference it in the master user control i.e. UC_Child.exposedVariable = ..., however this one is slighly more complex.
The child control sits within a repeater so I cant access it in the same way. I can use the findControl method to find the user control but haven't been able to get down to the property itself so that I can set it.
I have seen the odd solution to this problem on the web which incolves passing data via a session object but surely there is a more direct route to this problem.
View 4 Replies
Similar Messages:
Jun 4, 2010
I don't think I understand fully how ASP.NET does inheritance of controls.I have a user control, ucBase, which has an asp.net label in the ascx file. Code behind references the label and it works fine during run time if the control is not a parent for another user parent.
If I have another user control, ucChild, inheriting from ucBase, the label in ucBase's code is always null. ucChild has no controls in its ascx fileThe server controls (like the label) needs to be declared in the ascx file and not created programmatically.What needs to be done for ucBase to see its own controls when it's a parent user control?
View 1 Replies
Sep 10, 2010
I've got a web site that has a master page and that master page (mpMaster that has a user control ucControl1) which has a sub user control (ucControl2), this user control has a property which accepts a value. Now, I have a page that uses the master page
and on this page I have another user control (ucPageControl), I need to find a way of setting the value in ucControl2 from ucPageControl. Is this possible at all?
View 5 Replies
Feb 17, 2011
I am trying to assign user control from another user control ..first time its binding control successfully but when we refresh the data its giving error
saying "Object reference is not set an instance".
how to refresh data from another user control ...
My senerio below :
1 Aspx page
2. User control
calling usercontrol databinding method from aspx page but once it get refreshed ,not allowed to bind it again..
View 2 Replies
Feb 18, 2011
I'm attempting to create a simple menu user control just as outlined here.
The attached code results in an "Object reference not set to an instance of an object" error, but I can't figure out why.
<%@ Master Language="VB" CodeFile="MySite.master.vb" Inherits="MySite" %>
<%@ Register src="Controls/Menu.ascx" tagname="Menu" tagprefix="my" %>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">......
View 1 Replies
Jun 11, 2010
I have to access the parent form's controls inside an event handler method on my user control's code behind.
View 4 Replies
Mar 10, 2011
I have a web user control that represents a simple message box. It is used to display simple messages like "Item has been deleted", or "The item was saved successfully".
On the other hand, I have another web user control that represents the item in the form of an editable form (I made this a user control because this is used in two different pages). I want to embed an instance of the message box user control inside the editable form. I am writing this right after the @Control directive:
[Code]....
Instead of using @Register directives, I register the user controls in web.config and so far this has worked just fine.
With the above markup, the project compiles, but whenever I try to navigate to a page that contains this construct, I get an HttpParseException exception. Furthermore, Visual Studio states that the tack w7rc9:MessageBox doesn't represent a known control.
What am I doing wrong?
View 2 Replies
Feb 16, 2010
I have a user control, that has an update panel and update progress control in it.
I use this user control in more than 1 location on the same page.... problem is, when ucA posts back, I see the update progress control for both ucA and ucB. I assume this is because it is a user control and the update panel and progress are named the same?
Either way - how do I make it so that the update progress only displays for the proper user control?
View 3 Replies
Jul 14, 2010
I've exempted the irrelevant bits of code. Essentially, I am trying to change the URL of an image control inside of an update panel inside of a custom user control from a function called inside an update panel from my main page. Using UpdatePanel.Update() isn't working: I end up waiting for the next full page POST to occur before all the updates I make to CustomControl from buttons within the main page's update panel are visible. I verified that Update() was being called via the debugger: there are no issues in that department.
Here, you can see Custom Control and the Button declared. The button is in an update panel to avoid giving a full POST and causing the whole page to reload.
<cust:CustomControl runat="server" ID="CustomControl1">
<asp:UpdatePanel runat="server" ID="UpdatePanel1"> <ContentTemplate>
<asp:Button id="Button1" runat="server" OnClick="DoStuff" />
</ContentTemplate> </asp:UpdatePanel>
This control stores images within their own seperate update panels because rerendering the images is very slow (it requires processing arrays of millions of datapoints) and the user only ever needs to modify one image at a time. I'm using Image1 as an example.
[Code]....
View 3 Replies
Jul 16, 2010
I want to convert windows user control into web user control..I have the usrDataView.cs..I need to convert this file into usrdataview.ascx.can anyonr help me?...how I can convert the file...Is any method is available..
View 1 Replies
Jun 3, 2010
have two user controls on one aspx page. UC1 has a grid which contains a link button column which user clicks. Based on the value of clicked cell, I need to show some data into UC2.How do I pass data from UC1 to UC2? How do I invoke a function of UC2 from UC1?
View 2 Replies
Apr 16, 2010
All I would like to be able to do is include one user control within another! Is this possible? I have spent the last hour searching the internet and it seems that I can't find a single thing.
In classic ASP it would be something like:
<!--#include file="EditProject.ascx"-->
I tried this but no luck!
Parser Error Message:
There can be only one 'control' directive.
Source Error:
[Code]....
Line 1: <%@ Control Language="VB" AutoEventWireup="false" CodeFile="EditProject.ascx.vb"Line 2: Inherits="Controls_WebUserControl" %>Line 3: <form runat="server">
View 3 Replies
Mar 5, 2011
It's simple to create both user control from the two world : ASP.NET+Razor or MVC 3.0.But i do not known how to consume the user control FROM the razor"_layout.chtml" page.I want to put such thing within the layout page: <uc:MyTag Prop1="" Prop2="" />So i need to declare this directive at top of the layout file : <%@ Register TagPrefix="uc" TagName="MyTag" Src="Controls/Mytag.ascx" %>
View 1 Replies
Feb 7, 2011
I have a user control which is inside a update panel.This user control has a event like
[code]....
Inside this i am checking a checkbox which is outside the update panel.
But it is not checking the checkbox ?
In firebug i found that the html for that checkbox is not rendered.
What is the way to do that?
View 1 Replies
Dec 22, 2010
I have a user control which contains a basic shopping basket item counter. This just writes out some html to a literal in the controls Page_load method.
I have other controls with "Buy" buttons which add an item to a shopping cart object held in a session. The basket counter get the totals from this object.
When I click the Buy button how do I update the basket counter at the same time? If i refresh the page the counter is accurate. Is there a way I can run an update method inside the basket control?
I'm using Umbraco so have master pages. I've tried to just use Page.FindControl but this always returns null.
View 3 Replies
Jan 9, 2011
is there an easy way to update a user control from another user control? i have a input box and a submit button. the user inputs a code, hits sumbit and based on the code, points are applied to thier score (another user control). the points are applied to the score in the database but don't show up on the page display until i hit refresh. is there an easy way to update the control on submit?
protected void btn_Add_Coupon_Click(object sender, EventArgs e)
{
try
{
SqlDataSourceTEST.DataSourceMode = SqlDataSourceMode.DataReader;
IDataReader Reader = (IDataReader)SqlDataSourceTEST.Select(DataSourceSelectArguments.Empty);
if (Reader.Read())
{
int iPoints = 0;
iPoints = (int)Reader["Points"];
if (iPoints > 0)
{
Profile.TimesVisited = Profile.TimesVisited + iPoints;
lblcoup.Text = iPoints.ToString() + " have been added to your score!";
}
else
{
lblcoup.Text = "Coupon Code Not Valid";
}
}
Reader.Close();
Reader.Dispose();
}
catch (Exception ex)
{
}
}
View 1 Replies
May 13, 2010
I have a user control at the top of my page which shows name of user.when I update user name on my page and submit the data , all data is updated but at the top in user control the name is not refreshed it shows previouse one.
how to refresh user control on update.
View 4 Replies
Feb 26, 2010
I have a user control which contains two text fields each assigned with requiredfield validators this control contains another user control contains say a button .On click of this button i need to validate the fields from the parent control text fields.I try the Page.Validate("ValidationGroup") with Page.IsValid it validates but the error message is not shown .Error message is shown only if i try to validate it from the contains which contains the required field validators ?
View 1 Replies
Jul 13, 2010
Now the weird thing is I have a user control UserControl1 in which I put some JavaScrdipt logic there, and I have another user control UserControl2 and I registered both in the page called Page1.aspx.I would like to call the JavaScript function resided in UserControl1 from UserControl2, however, I got an error saying the function is not defined. I think both user controls are loaded before I use them then I think the JavaScript function can been seen anyway in that page.
View 1 Replies
Mar 22, 2011
i have 2 user control : uc1 and uc2. and i have button in uc2 i call button1, i want to set commandArgument of button1 from uc1, how can i do this?
View 5 Replies
Nov 9, 2010
I want to use a couple of instances of the same control on a page. The user control is intended to display a list of records in a repeater. The aim is that the second control will show a list excluding the IDs in the first control The control has a number of public properties, including IDsInThisList, and IDstoExclude. The query will exclude the IDs in the second property.
What I would like to do is get the record IDs from the first instance of the control (IDsInThisList), and pass them to the second contro as the IDsToExclude.
I have a test page where I am setting the properties of the controls in code. As you might guess, it's not working! The first control displays the top 3 items, as desired, but the second display the records 1-7, rather than records 4-10 because it is not receiving the IDstoExclude from the first control When I response write the IDstoExclude from the first control in my testpage, the string is empty. (if I do it from within the control, it shows the IDs)
How can I get the controls to fire in order and pass values to each other?
Screen grab of test page + uc and test page code attached
[Code]....
View 5 Replies
Jan 19, 2011
Is there any way for one user control to raise an event that is handled by another user control without going through the page? I am using Umbraco and do not have access to the page object.
--Edit--
Umbraco has the idea of Macro's (user controls) that it loads into pages. I can't access the page directly as this is part of the framework.
There is a publish subscribe (pubsub) pattern that I know would fit my needs well (2 user controls that need to talk to each other) but am unsure how to hook it up in ASP.Net without the page object.
View 1 Replies
Jan 11, 2010
i have:
- Default.aspx;
- user1.ascx: 1st user control containing repeater;
- user2.ascx: 2nd user control containing a detail view of row.
In page.aspx i dinamically load the repeater inside a user1.ascx.
after i want to dinamically load the 2nd user control also in default.aspx by a button inside a user1.ascx.
How i can do this? I can't load user2.ascx inside user1.ascx but only in aspx page.
View 2 Replies
Jun 1, 2010
I have two user controls I have some functions written on those two controls. Is it possible to invoke a function written on one user control from another user control.
View 3 Replies
Jul 28, 2010
I have a requirement where i need to access the methods of one user control in another user control.
View 8 Replies
