Validation Of Viewstate MAC Failed / Change Selection In A DDL

May 7, 2010

Sutring the website that im building, I opened up a page and left it open for about 40 minutes.

Next, i was trying to change selection in a DDL and got this error messag : Validation of viewstate MAC failed.

I read a bit abou the problem, still can't figure out why it happens, but it was written that a good workaround is :

[code]...

and third : I've thought about another solution. If the problem occurred while waiting, perhaps force refresh after certain amount of minutes of user doing nothing with the page. I think that I can perform the refresh using response.redirect, but what about the "WAITING "CERTAIN AMOUNT IF MINUTES OF USER DOING NOTHING WITH THE PAGE" part?

View 1 Replies


Similar Messages:

Validation Of Viewstate MAC Failed.?

Jan 19, 2011

i have these message in only one user of my web ASP.NET application.

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey & validation algorithm. AutoGenerate cannot be used in a cluster.

View 2 Replies

C# - Validation Of ViewState MAC Failed?

Nov 9, 2010

After changing the Master Page in ASP.NET MVC 1.0 application, I keep getting this familiar error when I try a postback without filling in the mandatory form elements which are validated by the server:

"Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster."

The new page refers to a lot of jQuery code with lightboxes, superfish etc. Could that be a problem while doing a postback?

If I revert back to the original master, the error disappears and I'm able to validate form fields. Both masters are located in the same path.

After a little debugging, I've realized that a directive in the master page:

<% Html.RenderAction("menu", "nav"); %>

is creating the problem. The directive asks the "menu" action of the controller "nav" to inject a partial view Menu.ascx. If I delete this line from the new master page, everything works OK. My app's left bar navigation relies on this directive to work properly. Is there any way I can get around this?

View 2 Replies

MVC :: Validation Of Viewstate MAC Failed?

Apr 29, 2010

I am trying a MVC 2 application on my computer's IIS and when I go to a page that contains a form I get the following error:

-----------------------

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Web.HttpException: Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
------------------------------

What is strange is that on the begining the form is ok but after a while I started to get this error.And why at the start everything was ok and after a while I started to get this error?

View 1 Replies

Validation Of Viewstate MAC Failed - How To Avoid It

Jan 25, 2010

I know this is a very common problem and a quick search in google offers a lot of solutions. However I could only find one person that came across it in the same way I am and no-one answered their question.

The scenario which causes this is if the page has been left dormant for a period of time and then a button is pressed which runs some sort of command. This might be pressing the logout button or trying to submit a contact form after having walked away at some point and then returning and hitting Send.

I do not have posts or actions in my form, it looks like this: <form id="form1" runat="server">

I have also added the following line to my web.config: <pages enableEventValidation="false" iewStateEncryptionMode="Never">

View 1 Replies

VS 2005 Validation Of Viewstate MAC Failed - How To Fix It

Jul 28, 2010

I have a web page that shows all contacts and its running fine.

When user does not activity for some time and after that user clicks the button to download records, its shows message:

Validation of viewstate MAC failed

I am not getting where this problem arise and what to do to solve.

One imp thing, after being inactive for some time when I log out and then log in then its works fine.

I assume it can be session timeout problem, but don't know how to deal with it.

View 1 Replies

Web Forms :: Validation Of Viewstate MAC Failed?

Sep 2, 2010

this avoids a MAC error

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

I add this to webconfig and it works

<pages validateRequest="false" enableEventValidation="false" viewStateEncryptionMode="Never" enableViewStateMac="false">

why does it work and what an earth is this error as it makes no sense to me. it is to do with sessions.

View 3 Replies

AJAX :: Validation Of Viewstate MAC Failed?

Dec 29, 2010

I have a search page and it works most of the time but every now and then when I enter another word to search again, I kept getting this error in the Firefox's Error Console:

Error: Sys.WebForms.PageRequestManagerServerErrorException: Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster. Source File: http://www.MyComp.com criptResource.axd?d=zNx0Fk9xi1ETKBw_Fc9MJ3a9Kp9CNPrHQDabGthwzSh32Wkw_OzriOYrMMZHyFSHnzqpp01wziW_tN0f9jEcZnJcMuTjBAcDB3ptDE0FILLyGwC956G8jI5pQ19F3beEYg0dkW9A9W-jBl1ZBsRms11V-vdOFaHdfpkaWww0H0tuL7am4AbVTa36mnOyWkDq0&t=2610f696 Line: 1508

View 7 Replies

Error - Validation Of Viewstate MAC Failed

Jul 14, 2011

I don't know what is causing this. The weird thing is, eventually, it goes away (as in, i get to see the web application form), BUT my web app does not work properly. I have image buttons that are not showing the image that I set at imageButton.ImageUrl. It works fine when I run it on my local machine (IIS), but when I try it on one of those free hosting sites, it will go as far as showing the interface (which has the image buttons), but when I click, it suppose to be set with an image.

btw, the first aspx page contains a ListView control, then after clicking on a button in that page, it goes to another page that contains a bunch of imagebuttons and an ajax timer control. I get the " Validation of viewstate MAC failed" error AFTER clicking on the button (in the ListView page).

View 2 Replies

IIS Configuration :: Validation Of Viewstate MAC Failed

May 7, 2015

i have a webapplication hosted on web server. when i open page example login page , if i login after 2-3 mins or open any page after some time i face error, mentioned below. Server Error in '/' Application.Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster. URL...

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Web.HttpException: Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.URL...

Source Error:

The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, follow one of the below steps, then request the URL:

1. Add a "Debug=true" directive at the top of the file that generated the error. Example:

<%@ Page Language="C#" Debug="true" %>

or:

2) Add the following section to the configuration file of your application:

<configuration>
<system.web>
<compilation debug="true"/>
</system.web>
</configuration>

Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.

Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.

[ViewStateException: Invalid viewstate.
Client IP: 14.98.31.134
Port: 59961
Referer: http://www.arpfashions.com/admin/index.aspx
Path: /admin/index.aspx

[code]....

View 1 Replies

Web Forms :: Validation Of Viewstate MAC Failed - How To Fix This Error

Feb 15, 2011

I have simply created two aspx pages for testing purpose, Page1.aspx and Page2.aspx.

Page1.aspx code is as follows:

[Code]....

And Page2.aspx simply have this code:

[Code]....

Now,when i run Page1.aspx and press the button i am getting this error. Can anyone tell me why this error is occuring ?

ERROR:

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.Description: An unhandled exception occurred during the execution of the current web
request. review the stack trace for more information about the error and where it originated in the code.

View 10 Replies

System.Web.HttpException - Validation Of Viewstate MAC Failed?

Apr 10, 2010

I have a website(connect to active directory and pull the required details) deployed on the production web server and it is working fine from last one year.

But from last two days users are getting the following error frequently and find the error details below:-

how i can proceed on this error so that i will apply the fix in the webserver.

Error Details:

[code]....

View 3 Replies

Validation Of Viewstate MAC Failed / How To Repair This Error

Aug 19, 2010

have this error in server..

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Web.HttpException: Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

Source Error:

The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, follow one of the below steps, then request the URL:

1. Add a "Debug=true" directive at the top of the file that generated the error. Example:

<%@ Page Language="C#" Debug="true" %>

or:

2) Add the following section to the configuration file of your application:

<configuration>
<system.web>
<compilation debug="true"/>
</system.web>
</configuration>

Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.

Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.

View 7 Replies

Validation Of Viewstate MAC Failed When On Page For 20+ Minutes?

Jan 14, 2011

If you open a web page on one of the websites hosted on our server, and leave it for 20 minutes, and then submit a form, a "Validation of viewstate MAC failed." error occurs.

What possible reasons could there be for this?

View 2 Replies

State Management :: Validation Of Viewstate MAC Failed?

Dec 29, 2010

In our control environment, we've started, somewhat intermittently, getting:

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

on our website.It also suggests:

Source Error: The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:

1. Add a "Debug=true" directive at the top of the file that generated the error. Example:

<%@ Page Language="C#" Debug="true" %> or:

2) Add the following section to the configuration file of your application:

<configuration>
<system.web>
<compilation debug="true"/>
</system.web>
</configuration>

Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.

Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.

We already have compilation debug as true. We have upgraded our website to ASP.NET 4.0, although our middle tier components are still at 3.5. As we do in out production machine configs (which are using ASP.NET 3.5) we have

<section type="System.Web.Configuration.MachineKeySection, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=abcabc123123" allowDefinition="MachineToApplication"/>

we also have one in the new .NET 4.0 machine.config:

<section type="System.Web.Configuration.MachineKeySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=abcabc123123" allowDefinition="MachineToApplication" />

This control environment is not in a server farm. Why is it suggesting that I turn on debug, when it's already on. Why isn't it showing me my source code?

View 1 Replies

State Management :: Validation Of Viewstate MAC Failed ...?

Mar 1, 2011

I have this error:

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

my website was designed using dotnet 2003 worked under dotnet framework 1.0 the website was working fine then i had to upgrade the server to windows 2008 iis 7.0 so i configured the website to work under dotnet frame work 2.0 and the problem started to show up

i have tried many

enableViewStateMac="false" viewStateEncryptionMode="Never" enableEventValidation="false"
<machineKey validationKey="AutoGenerate,IsolateApps" validation="SHA1" decryption="Auto" decryptionKey="AutoGenerate,IsolateApps" />

View 10 Replies

IIS Configuration :: Validation Of Viewstate MAC Failed Error

May 7, 2015

When i keep the .aspx page open or iden for long period on browser and then clicks on button after some time , it shows me the

error as "Validation of Viewstate MAC failed. Auto generate cannot be used in cluster."

how should i avoid this... ?

View 1 Replies

Web Forms :: Google Chrome And Validation Of Viewstate MAC Failed

Jan 15, 2010

Anyone has experence with "Validation of viewstate MAC failed" issue while using Google Chrome? We have a customer having specific issue with Chrome. It's the strangest thing. In IE and Firefox, the problem does not exist, but once Google Chrome is used instead, he gets the error.

*note, we already have <pages
enableViewStateMac="false"
enableEventValidation="false"/>

View 4 Replies

Web Forms :: Validation Of Viewstate MAC Failed / Error When Run Homepage

Aug 10, 2010

I am having a small problem with my links on the master page. I have inserted 5 link buttons on my masterpage. In every link, I have set the PostBackUrl to the corresponding page. In the link click event, I have also written the C# coding: Response.Redirect(). When I run the homepage (that is using the masterpage as a template) and click on one of the link, I get this error: Validation of viewstate MAC failed.....

What should I do to fix this error?

View 2 Replies

Web Forms :: Validation Of Viewstate MAC Failed - How To Avoid This Error

Dec 9, 2010

I have an application that works fine, problem rise when a page is waiting for the user response for more than 20 min and then user click a link on the form. The application response with the following error -

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

I read a few articles regarding setting the Pages tag in web.config and set the Pages tag to the following -

[code]....

View 3 Replies

Validation Of Viewstate MAC Failed Error When Running Project

Feb 16, 2011

when i run my project i got bellow error...

"Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster."

View 1 Replies

Postback To Control's Parent - Validation Of Viewstate MAC Failed / How To Fix It

Mar 25, 2011

I have a bit of javascript that presents a modal to the user with the rest of the page "grayed out." Pretty common these days. The modal allows you to specify a URL which then uses AJAX to serve and display. What I need is that when the control posts back, it posts back to the parent page, not the modal page. To attempt this, I used javascript to alter the target of the modal page's form element to the parent page's URL. When I try this I get the following error:

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

This is done locally and as of now, the app will never be on a cluster. I think this has to do with the validation process and .NET doesn't like that I've changed the target. Anyone know a way around this? I really need this to work how I described.

View 1 Replies

Web Forms :: URL Rewriting Causing Validation Of Viewstate MAC Failed?

Nov 22, 2010

Has anyone encountered while using Context.RewriteUrl in global.asax causes this error: Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster ?

Here is the scenario, let's say I have a url

http://mysite.com/admin/login.aspx instead typing the whole url in address, user can type either
http://mysite.com/admin/ or http://mysite.com/admin which all end up at http://mysite.com/admin/login.aspx. When a user type http://mysite.com/admin and entered correct login info, and press login button it gets the error above. How can I resolve this? Tried setting EnableValidateRequest to false and EnableViewstateMac to false also even I do not want to use this approach and still does not work.

View 5 Replies

Validation Of Viewstate MAC Failed. Using .Net Framework 3.5. Not Using Form Action?

Aug 29, 2010

I know this question has been asked million times but I think my situation is different here.I am using .NET Framework 3.5 SP1, there is no form action on the page and it's not happening when I try to submit the form quickly. I am not on a web farm either.I have a page with two GridViews. One Gridview acts as a master gridview and second as detail gridview. First Gridview has autogenerate select button and clicking select would bring related records in detail gridview at the bottom. I have a refresh Link button at the top. Everything works fine. I click refresh button and it works fine too.Ok when problem start happening when I leave the page idle for like 10 minutes or so and then I click Refresh button only then I get this "Validation of Viewstate MAC failed" error.

View 1 Replies

Web Forms Site Setup - Validation Of ViewState MAC Failed

Mar 11, 2016

I have just setup a new ASP.NET Web Forms Site cleared out the default contents and added a button and a click event. That's it. Yet trying to run the page I get the error in the subject.

Looking around the web and this forum I have tried numerous things, including setting the <pages> tag each of the following three ways (not at the same time of course), adding debug = true to various places, etc. but the error persists.

<pages validateRequest="false" enableEventValidation="false" viewStateEncryptionMode ="Never">
<pages enableViewStateMac="true">
<pages enableViewStateMac="false">

Here is the code, as you can see there is really nothing in the site yet:

Default.aspx

Code:
<%@ Page Title="Home Page" Language="VB" MasterPageFile="~/Site.Master" AutoEventWireup="true" CodeFile="Default.aspx.vb" Inherits="_Default" %>
<asp:Content ID="BodyContent" ContentPlaceHolderID="MainContent" runat="server">
<p><asp:Button ID="Button1" runat="server" Text="Button1"/>
</asp:Content>
Default.aspx.vb

Code:
Partial Class _Default
Inherits Page

Protected Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Dim i As Integer = 0
End Sub
End Class

I should also say that this is happening on a standalone dev box that is not part of a cluster.

View 11 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved