Visual Studio :: Number Of Errors In Visual Studio?
Feb 19, 2010
This is strange behavior that I've noticed with Visual Studio. I'm correcting some namespace and scope issues with in a project. When I start to address the issues with one of the files I start off with 12 errors. Then I open the file and the number of errors increase to 36. But then when the file is open and I build the project it says that there are only 12 errors. Why would it show that there are 36 errors initially when there are really only 12 when the solution is built?
View 1 Replies
Similar Messages:
Apr 7, 2010
I am a student of HLC, I am learning Visual Basic, they sended me lots of books and a CD with Microsoft Visual Studio 2008 Professional Edition. I have problem with installing it. There is the error;: "Setup Failed. Use the following links to research the source of the failure: There were errors during setup. Although the components were installed successfully, some setup errors were detected. View error log
For information on known setup issues, see the Microsoft Visual Studio readme file, readme.htm, located at the root of the installation source. For Knowledge Base articles on Visual Studio setup issues and solutions, see KB article 319714, HOW TO: Troubleshoot Visual Studio .NET Installation, at [URL]. To find help from other Visual Studio users, try the following newsgroups:
Visual Studio Setup
Microsoft Product Support
For details about this setup failure, see the setup
log files."
and
"The following component failed to installl: Microsoft Document Explorer 2008. The following components were not attempted: Microsoft Visual Studio Web Framework 3.0 Framework 3.5" and many other componetns. I have got Windows Vista Home Basic SP2 with 1.00 gb RAM and 2.00GHz. I all ready asked my tutor but he don't know how to make it work. There is no information on the web about this problem.
View 6 Replies
Aug 14, 2010
is it possible to convert whole visual studio 2008 web site project to visual studio 2010 web site project
my current project references
i have a very annoying iis problem
iis server stops working until app pool is recycled
i am hoping that new visual studio (net framework 4.0) may solve this very annoying unsolveable problem
View 2 Replies
May 21, 2010
Anyone know if I can maintain a VS 2008 (.net 3.5) project by using the VS 2010 IDE ?
View 1 Replies
Jan 28, 2010
where to find/download visual source safe plug in or visual source safe client for visual studio 2005 IDE?
I do not want to install visual source safe 2005 server.
View 1 Replies
Apr 15, 2010
Is it possible to migrate the application which is in visual studio 2003 to visual studio 2010. provide me details about how to migrate.
View 2 Replies
Jun 16, 2010
I have a site in production developed in 2005 and i am planning to migrate to Visual studio 2010. Is there an easy way to do it?
View 1 Replies
Feb 28, 2011
I want to use a source control in VS2010, I know my best bet is TFS, but at the moment TFS(can't afford ). As i understand TFS is the new VSS_2005(can afford)Can VSS 2005 be use as a source control for VS 2010 solutions/projects?
View 2 Replies
Jul 28, 2010
I just recently upgrade my asp.net web project from visual studio 2005 to visual studio 2010. The upgrade was successful with no problems however im missing some features with this project. The One Click Publish feature(which is greyed out) in the header area of Visual Studio 2010 and the Add Config Transforms feature which is no where to be seen when you right click on web.config. When i create a new web project straight from visual studio 2010, these options work fine.
View 1 Replies
Mar 9, 2010
Visual Studio 2010 Beta 2 locked up, and when I tried to restart it, it wouldn't load, so I did a devenv.exe /resetuserdata to get it going again. It reset everyhing in my options of the web app/ etc, and now some AJAX conrols don't work such as dragpanel. I assume that it is because something got reset that I haven't enabled again, but can't figure it out.
View 2 Replies
Feb 14, 2011
Im working on a website project with Visual Studio 2010 from 2 different computers (home & work).
In Dreamweaver Im used to FTP to upload/download files to/from a webserver to syncronice my files on the current computer Im working on.What is best option in Visual Studio 2010 to sync project files between home & work computers? I have seen there is a built in FTP, but seems only it can upload files, limited functionality?
View 1 Replies
Jan 20, 2010
can Visual Studio 2008 be All-In-One tool to integrate source code continuously from team members, build, unit test?
Having used Visual Studio Team Edition 2005, unit testing each method within VS itself. I strongly believe that it is feasible to add-on tools. Example ankhsvn tool to use SVN from Visual studio [URL]
In my investigating i have come across number of tools(shown below) to use with Visual Studio 2008 professional
Development tool:- Visual Studio 2008 professional using Subversion as source control tool. Continuous Integration:- Hudson or Cruise control Build tool:- NAnt Testing:- NUnit, Selinium As Visual Studio 2008 can be used for unit testing I think NUnit is out of consideration.
In the same way i would like to have any other tools/add-ons to Visual studio to implement continuous integration, building and unit testing. This process should be automated such a way source code between team members is continuously integrated, built and unit testing is done as configured.
Objective is to use few number of tools as add-on to Visual Studio or achieve most from Visual studio itself (example unit testing). Visual Studio should be all in one tool.
I am aware that Team Foundation Server best suits my requirement, but it is out of scope due to its cost.
View 3 Replies
Dec 13, 2010
I am building master page in visual studio 2005 and I have placed contentplaceholder into between <head> and </head> tag of master page, but in source view of visual studio 2005, I am getting error that says "unrecognized tag prefix or device filter" how do i get rid of this error or is this bug in visual studio 2005
View 2 Replies
Sep 28, 2010
when i opened my Visual Studio 2010 i noticed that my ajax tab was missing from my toolbox and ajax control kit too.Then i noticed even that when i create new website, there is no web.config in it and it should be.WHAT IS GOIN ON???? :/
View 13 Replies
Apr 1, 2010
i install url rewrite iis module to my computer i want when i press f5 in visual studio my project work with url rewrite how can i this?my web sites is not seeming in iis.
module=http://www.iis.net/expand/URLRewrite
View 1 Replies
Apr 9, 2010
Visual Studio 2008 shows a lot of erroneous errors when building a website (not a web project) in the errors list. These errors are usually corrected (removed) when I rebuild the site a couple times but they cost me wasted time.Is there anyway to hide the erroneous errors?
Update:
I've decided to look into this to see if I could reproduce it. This is the exact behavior I am seeing, using the website model, I type some invalid syntax on a page. The errors list fills up with errors. I correct the error and the errors list does not update. I build the project and the errors list still shows the errors but the build shows as build completed. I build the project a second time and the errors list is cleared.
My question is there anyway to make the errors list clear on the first build? I thought it might have something to do with page build vs website build but it seems to make no difference. I am not using any third party dlls on this website.
View 3 Replies
Aug 8, 2010
I downloaded Visual Studio 2008 Professional Edition via torrent.
It was working fine for months & i formatted my comp & when i tried to reinstall it is not getting installed !
It shows the following error !
and the error log file seems to be like this...
BUT.,
I'm able to use Visual Studio & i'm able to work in it....
I'm re-installing since 2 days for more than 4 times...
View 1 Replies
Mar 1, 2010
I have VS 2008 Professional Edition.....I want to test a function like this:
public int getIdByName(string name)
{
var item=from x in DATAB
where x.name=name
select x.id;
.
.
return idValue;
}
now I test end I have:
[TestMethod()]
public getIdByNameTest()
{
string name="Bob"
int expected = 1;
int actual;
actual = ClassGET.getIdByName(name);
Assert.AreEqual(expected, actual);
Assert.Inconclusive("Verify the correctness of this test method.");
}
The error in "test run" is:
Failed ......[Class]....... Test method threw exception: System.ArgumentException: The specified named connection is either not found in the configuration that is not for use with the EntityClient provider or thought is invalid
View 7 Replies
May 28, 2010
How can I ensure that web application converted from 2003 visual studio to 2008 visual studio
to have two files as it is when create a web file in visual studio 2008.The web application is in Chsarp. I have converted these filesfrom 2003 to 2008 but they still have three files each.
View 4 Replies
Apr 14, 2010
From where can I download Bootstrapper Manifest Generator for Visual Studio 2010?
View 2 Replies
Feb 14, 2011
Every time I press F1 to view the online Help it launches in the Opera browser. I really dislike Opera and only have it installed on my PC for testing purposes. How do I change it to IE?
View 1 Replies
Apr 29, 2010
I am having an issue in VS 2010 trying to get even the default ASP.NET Web Application to run in Debug mode. I get the error:
"Unable to start program 'http://localhost:1443/Default.aspx'.
The system cannot find the file specified."
I am stumped here and cannot find anything out there with this error.
View 4 Replies
Feb 9, 2011
I run the start debugging option...it runs successfully. but still is shows start debugging option is shown in the Visual studio 2005 IDE. And one more problem is ::I applied break points in one page and run the application. but those break points are not detected....
View 1 Replies
Feb 5, 2010
A typical CSS property that I use often is overflow-x and overflow-y. Sometimes I use CSS 2.1 or later properties or selectors. These (correctly) raise a validation error: Validation (CSS 2.0): 'overflow-y' is not a known CSS property name.For years I ignored this, but it kinda feels wrong. It's possible to switch off warning in C# and other languages for a particular line, block, file or project. Is something similar possible for CSS (or HTML) errors or warnings? Instead of switching it all off, I prefer a more granular solution.
View 2 Replies
Aug 11, 2010
I am trying to convert guidance package of vs2008 to vs2010,
followed instructions as per this link {http://msdn.microsoft.com/en-us/library/ff697211.aspx}
and getting error as
Error 1 The "GenerateMenuResource" task failed unexpectedly....
View 1 Replies
