I upgraded to VWD Express 2010 and cannot edit text in the design view only the source view. Clicking on the design view takes to the code behind page.
If I create a test page without masterpages I can work in design view.
in my project the design view is not viewed, but the project is working well and good .. the only issue is i cant see my design view ..
error stated is ""Cannot switch views: Validation (Internet Explorer 6): Element 'Style' cannot be nested within element 'td'.""
After reinstalling Visual Web Developer 2008 express a few times I still don,t have design view just source view.
View 3 RepliesWhen I open files, particularly files with many links and/or images, vwd get stalled every few seconds as, according to the status bar, it's "getting file xxx from the web".
View 3 RepliesI downloaded VWD 2008 express months ago. Don't know what happened but my design view went.I have reinstalled the application several times but no success. I posted this problem on several forums and got many suggestions like uninstall office 2007, reinstall web authoring component, install n et.framework 3.5 which is not compatible with Win7 and does not install, so I have net.framework 4.0. I tried to bburn the iso file installation package, burnt it to a dvd and install it from the media, nothing.My pc is a Compaq Presario CQ61 Notebook running Win7 Home Edition.
View 2 RepliesIn VS 2005 I could change the layout appropriately, to move controls in a web form in design mode, to a place where I intend to. But in VS 2008 , I don't see such an option. My controls are stuck in places of their own and I am unable to move them to the intended locations. Googling suggested to use Tools -> option -> HTMLDesigner -> CSS. But not sure that is the correct route.
View 1 RepliesIn Visual Web Developer-2010, I have been trying to connect to IBM DB2 Database after installing the DB2 9.7 client (both supports VS2010/.Net4) so that I can use "ADO.NET Entity Data Model", but while clicking "New Connection" I can only see the list of Data Sources and Data Provider only related to MS SQL server. This is totally blocking my work, I am not able to work further since I cannot even establish the connection to my db2 database using this new editor so that I can create the edmx files in the solution for non MSSQL databases. Kindly provide me the solution ASAP, since my further work is blocking due to this.
View 2 RepliesAfter opening an existing proyect in visual studio 2010, the web form in design view doens't work. All server control puts a gray box with the following message : Error Creating Control - imgTransportistaSession state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. Please also make sure that System.Web.SessionStateModule or a custom session state module is included in the <configuration><system.web><httpModules> section in the application configuration.
View 4 RepliesI've wrote the comprehensive post within my blog: [URL] In brief words everything is simple:
1. I've downloaded free Visual Studio C# 2010 Express and Visual Studio Web Developer 2010 Express
2. I've successfully installed these versions.
3. I've tried registration online - and got the appropriate keys which I've used for registration.
Finally all the keys I've got are not valid for the system - and after 30 days evaluation (for free version?) period all these products are not running anymore because all the keys I am providing from online registration are invalid.
I'm thinking about installing vwd 2010 or vs 2010 express but want to know if either offer integrated jquery support.
View 4 RepliesIs it possible to configure and use IIS Express with Visual Studio Web Developer 2010 Express? If yes, Please guide me how to configure it?I have installed IIS express without Web Matrix using iisexpress_x86_en-US.msi I am able to run IIS express from command prompt but failed to configure my web site/application with IIS express. I want to configure my web site to launchun on IIS express when i press F5 :)
View 1 Repliescan't connect to sql 2005 express sp1 and vs is also sp1. 2) Which my guess is because of the database connection not being able... design view is not able to pull in the application for design, it's as if there is no theme and css just white background and black print.
View 1 RepliesI am very new to ASP.Net Forums and just starting up with MVC2.
For that, I was trying to build MVCMusicStore Application based upon the guidelines from ASP.Net site.
But when I am trying to add a view from controller or from Solution Explorer. VS stops responding.
I am using Windows 7 Enterprise as an OS and Microsoft Visual Web Developer 2010
Can I install Microsoft Visual Studio 2010 Service Pack 1 in Microsoft Visual Web Developer 2010 Express?
View 1 RepliesI uninstalled VWD 2010 Express Beta2. Then installed latest Release(April 12th) via Web Platform Installer .oh yes after installing XP Service Pack 3.
It all installed successfully and when I start the VWD 2010 express image comes up ....there is this fine text that says....
"For Evaluation Purpose Only"
"Use of this software should be limited to evaluation purpose only"
Being confused with that message I looked at Help->About VWD 2010 Express and right on top it says:
"29 days remaining"
So what's happening ? Did I install some wrong product... I don't think so...I used Web Platform Installer and yes it is "Visual Web Developer 2010 Express" and not a Professional Trial software.
With VWD 2008 it says "This product is licensed".
I'm totally new to ASP.NET ( as a VC++ 6.0 engineer ), I have just downloaded the express edition of 2010 web developer and cannot find for the life of me the correct project template to create an ASP.NET webservice.. in 2008 it appears there is an option for this .. however I cannot find it in 2010..
View 3 Repliesjust a quick question, are there a lot of developers using the express edition to make web sites, or is it limited to what you can do, and I would be better getting the full edition visual studio 2010. I have been using dreamweaver, but I wanted to try my hand at asp.net, thx for any info you can offer.
View 1 RepliesHow do I display the Toolbox? I've looked under every menu item and just don't see it.
View 1 RepliesI have a form that I'm working on in Visual Web Developer 2010 Express. I have a dropdown list to choose a data from the database. I want to use the chosen list item to populate a GridView object. This seems like it should be a simple thing to do.I have a data connection which uses a fixed SQL statement to populate the dropdown list and that works fine. I can select an item on the list and retrieve the correct information for the next query (namely an ID value for the next SQL statement).I have the data connection with another SQL statement to populate the gridview and that works fine. The gridview is currently just showing the entire dataset (it doesn't use the item that was selected in the dropdown list.Now I want to change the gridview's data connection to use the selected item in the dropdown list as a parameter to modify the SQL statementWhen I look at the properties of the data connection for the gridview data, I can bring up the Query properties and see the select statement. I also see the properties panel. I can add a property Name (Mine is "ID"). I then chose "Control" in Parameter Source and selected the ControlID for the dropdown list that has the ID information that I want to use for the parameter. I went into the advanced properties and modified some of the information because the ControlID is a Text field and the Database Column is a BigInt.My select statement looks like this:
[Code]....
What I don't know is how to get the parameter into the select statement.I've tried:
[Code]....
I use Firefox to browse the web, but I'd like Force Visual Web Developer 2010 Express to exclusively use Internet Explorer when I run my web apps (by pressing F5). is there a way to set this?
View 2 RepliesI am getting an error saying "failed to install VWDExpress 2010" below is the log.
I am trying to install the same using Web Platform Installer.
Below is the log of the failure.
DownloadManager Information: 0 : Loading product xml from 'https://go.microsoft.com/fwlink/?LinkId=193533'
DownloadManager Information: 0 : Product manager downloading: https://go.microsoft.com/fwlink/?LinkId=193533
DownloadManager Information: 0 : Loading product xml from 'https://www.microsoft.com/web/webpi/2.0/WebApplicationList.xml'
My existing system has Visual Studio 2008 and Visual Web Developer 2010 Express. But Microsoft web installer for Webmatrix has made Wematrix Launch ribbon menu pointing to Visual Studio 2008. How could I make Webmatrix point to Visual Web Express 2010. To make use of IntelliSense and the debugger, I have to manually launch Visual Web Developer 2010 Express.
View 8 RepliesI'm a new.
View 2 RepliesI'm using Visual Studio 2008, and when I select/highlight something in design view and switch to source view it does not highlight and scroll to the selected item. This makes it really hard to change stuff in source view, and it's very inconvenient at worst
View 2 RepliesSplit view and design view doesn't work.I installed and uninstalled Office 2003 and 2007 once but there's no office in my computer now.-I have Microsoft Studio Web Authoring Component installed.(12.0.4518.1066)(Uninstalled and installed it twice)-My computer-properties-Advenced system settings-environment variables-system variables-path is;
[code]...
What is the problem,how can i fix it? I tried everything in other posts.
