I have a web form with lots of code behind a button. I want to create a class, put all the code form the button into the class. But how do you call routines in the button from the class?
View 2 Replies
in .vb file, in a class i have created a button control, assigned its ID, and other properties.
In code behind file of a aspx page i have created object of that class.Run the page and browser Button control is coming. Now i want to do something in its click event.
But i am confused how to define that one, since presently there is no any button control instantiated.It is getting instantiated at the runtime.So, how to define its click event or any other events ?
how to jquery call a other call function other class is not static
[WebMethod]
public static bool Verify(string username, string password)
//Do your logic with username, password here
//I am just checking with admin/admin credentials
Console.WriteLine("Ritu");
[code]...
I have a WindowsForm that has a DataGridView that shows output of my app. The class with the button is DriveRecursion_Results.cs. I want it so that once the button is pushed by the user, my method FileCleanUp() in my SanitizeFileNames class is called. I'm not quite sure how to do this though.Here is the code for both classes:
public partial class DriveRecursion_Results : Form
public DriveRecursion_Results()
InitializeComponent();
private void listView1_SelectedIndexChanged(object sender, EventArgs e)
[code]...
My webform has 4 fields: Food Rent Utility subTotal
I'm using DynamicPopulateExtender for Food, Rent and Utility to update subTotal whenever there's a value enter.
Question #1: Do I use customScript or ServiceMethod that link to the function below
Protected Function UpdateSubtotal(ByVal nEntry As String) As Integer
Dim oldSubTotal = Eval("Subtotal")
'Bind("Subtotal") = oldSubTotal + Eval(nEntry) <--- I know Bind("Subtotal") don't work because Bind is not declared
End Function
Question #2: How do I update Subtotal value on the webform?
I'm trying to call a base class specifically; Release class into a Page_load method.The release class is linked to a baseclass which contains a method Dataset GetresultHow do i call from the release class into the page load and use GetResult.
View 12 RepliesI have a class that is referenced in my application. I use it in the codebehind, but now I need to call it from javascript. Is this possible, and how would I go about doing this? Say I have ClassABC. Within the class is method called getNames(). How do I call the method getnames() from javascript.
View 3 RepliesI wants to create a class file which contains the information about the salary calculation and call it on my page. hra,da,medical every thing is defined in percentage in that class and on my web page when i insert the basic salary in a textbox and click the button it will show the whole salary on a label.
View 2 RepliesI want to call css class that load background-image, font style,font size and so on...at the same time the code will load the button dinamically from database.. so that i want to put the CSS class, to change their image button when it default also when it hover.
View 2 RepliesI have create the following code
using System;
using System.Drawing;
using System.Drawing.Imaging;
using System.IO;
using System.Text;
using System.Linq;
namespace ImageProperties
[Code] ....
But I did call it into my pages . I am using this but not find the ExifUtil class ?
ExifUtil.EXIFReader exif = new ExifUtil.EXIFReader(@"c:pathtoimage.jpg");
Console.WriteLine(exif[ExifUtil.PropertyTagId.EquipMake].ToString());
Console.WriteLine(exif[ExifUtil.PropertyTagId.EquipModel].ToString());
I am beginner in web applications development. I started one little project and host it on source forge "https://homoco.svn.sourceforge.net/svnroot/homoco". And I started implementing authentication in this application to learn how it works. From my experience people never use out of the box things so I want to implement this stuff alone (like in real world projects). So some questions:
1) Is there any reason to use membership out of the box? To use database table schema, stored procedures etc. that tool generate for developer. I think that this lower control over code and I decided to implement it my self. I don't know if I am right.
2) Is my approach in this demo project good or bad (if someone have time I like to do just a little code review)? I created database based on business rules. Not using database schema that membership provider require. Extend "MembershipProvider" class to satisfy my needs. Implement queries to database myself.
3) Now, this question is a little wired but I have to ask it. If we make custom Membership Provider and do sql queries alone, implement all MembershipProvider class methods ourselves, and in application use Membership.blabla() why is this approach different from not extending MembershipProvider class and putting all this methods in some unique class and call its methods then? I hope that someone understand what I ask here.
I am sorry for three questions, but I really trying to find the best way to implement this feature in my demo project like it is a real world application.
I'm looking at automating some reporting that I'm going to be generating. I want the reports to be generated and emailed at a particular time every day. These times will vary, and so will the types of reports.I was wondering if there were any better solution to creating a routine with a timer that executes at a set time every day? If I include this class and routine in the Application_Start of my Global.asax, will it always be running, or is there some awesome EventListener that I'm not aware of?
View 3 RepliesI got a ASP.Net website (webforms application in C# - .Net framework 2.0) with Master Page, webforms and a GlobalFunctions class in App_Data folder where i do have ErrorLog functions and few other generic functions. Everytime an exception is caught in my webform it calls this GlobalFunctions.Errorlog function to log the error in my database table. After the exception details are written to the database table, I also would like to redirect the user to my ErrorPage.aspx like
Response.Redirect("ErrorPage.aspx",false);
However since i am inside a class (GlobalFunctions.vb) and not a webform, I don't know how to redirect this to ErrorPage.aspx since i can't access Response class.
I am trying to export data to a csv file in my web application.
I have the following class to enable this but i want to know how to call the class on Page_Load?
public class CSVExporter
{
public static void WriteToCSV(List<Category> categoryList)
{
string attachment = "attachment; filename=PersonList.csv";
[Code]....
I am trying to open a modalpop of previous page from a class, but i am unable to find that control
[Code]....
I am porting my simple Role Based Auth to ASP.NET. It requires this check on each page:
[Code]....
If put in each page's OnLoad, it works fine. But when I add it to the masterpage, it doesn't work. Is there something about the ServerVariables or Session Object that would prevent using those in a masterpage? Is it an issue calling my class from a materpage?
I wrote this code in class.cs. But I want call it’s from default.aspx.cs
public ArrayList GetInfos(string NAM)
{
ArrayList list = null;
if (ViewState["ArrayData"] == null)
{
list = new ArrayList();
string str = ConfigurationManager.ConnectionStrings["conString"].ConnectionString;
[Code]......
Hi I have a situation where I want to set the initial visible property of an Image to False and then in my code change it to True and then run a sub routine. My problem is that no matter how I order the code the sub runs before the image becomes visible. When I debug the image only becomes visible when it hits End Sub. Is there any way around this? Here's my code:
[Code]....
So I have Test1.aspx, Test1.aspx.vb. The LocalResource files, in the App_LocalResources folder, Test1.aspx.resx and Test1.aspx.es.resx. I also have a class called TestTheData.vb in the App_Code folder.
Now what I want to do is call GetLocalResource("stringObjRes").ToString in the TestTheData.vb class. The method however is not showing up in Intellisense. When I try to type manually, I get the error lines in my code.
I've imported:
Globalization
Threading
Threading.Thread
Web
Web.UI.Page.
I'm trying to do a number of large queries in the same routine, and have a label in an updatepanel update after each one. I must be doing something wrong, however, because whenever I fire up the routine, my label won't update until the last query is done. Isn't it possible to do UpdatePanel.Update multiple times in the same routine/event? This is the code I'm using:
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As EventArgs) Handles Button1.Click
lblStatus.Text = "Busy with task 1"
UpdatePanel1.Update()
LongTask()
lblStatus.Text = "Busy doing task 2!"
UpdatePanel1.Update()
LongTask()
lblStatus.Text = "Done!"
UpdatePanel1.Update()
End Sub
Private Sub LongTask()
conn = New SqlConnection(connstring)
conn.Open()
cmd = New SqlCommand("Select * from very_large_table", conn)
cmd.CommandType = CommandType.Text
reader = cmd.ExecuteReader()
End Sub
When the form loads, the lblStatus is emtpy. When I click the button, I see the page loading until it displays 'Done!'. I don't see the other texts. This is the page source:
<%@ Page Language="VB"
MasterPageFile="~/MyApp.master"
AutoEventWireup="false"
CodeFile="test_page.aspx.vb"
EnableEventValidation="false"
Inherits="test_page"
title="MyApp"
Theme="DefaultTheme"
%>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:UpdatePanel ID="UpdatePanel1" runat="server" UpdateMode="Conditional">
<ContentTemplate>
<asp:Label ID="lblStatus" runat="server"></asp:Label>
<asp:Button ID="Button1" runat="server" Text="Update!" onclick="Button1_Click" />
</ContentTemplate>
</asp:UpdatePanel>
</asp:Content>
The page has a masterpage that contains the neccesary Scriptmanager.
In my application, there's a module that displays a user's assignments. Sometimes these assignment descriptions are pretty long that's why I display up to 500 characters of the description. However, because I use an HTML editor in the app, if I blindly grab the first 500 characters, there's a good chance the description will look very funky due to missing HTML tags. So, I first need to strip off all the HTML tags, then grab the first 500 characters. Before I re-invent the wheel, I wanted to see if someone else has already tackled this issue and would be kind enough to share his/her code with me.
View 6 RepliesI have a GridView with Cell 0 containing the ID that I need to pass to a Public Sub.
I cannot figure out how to pick the value from Cell 0 in order to pass it to the Sub. I have tried experimenting (see the Dimmed EventID below) but have failed. Here is my code:
Protected Sub gvAppointmentsCalls_RowCommand(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewCommandEventArgs) Handles gvAppointmentsCalls.RowCommand
Dim EventID As String = gvAppointmentsCalls.Rows(e.RowIndex).Cells(0).Text
If e.CommandName = "gvAdd2Outlook" Then
Send_iCal_Call(EventID)
End If
End Sub
If I type the value directly e.g. Send_iCal_Call(123) then it works perfectly.
Public Sub Send_iCal_Call(ByRef Event_ID As Integer)
' My code in here
End Sub
I have created one class and use in default.aspx page working well. But when i add new aspx page and trying to call there i am getting error.
Code:
Parser Error Message: 'project1._Inquiry' is not allowed here because it does not extend class 'System.Web.UI.Page'.
Below code is from default.aspx header.
k Code:
<%@ Page Language="vb" AutoEventWireup="false" CodeBehind="Default.aspx.vb" Inherits="project1._Default" %>
Below is the code of second file where error appear.
ss Code:
<%@ Page Language="vb" AutoEventWireup="false" CodeBehind="Inquiry.aspx.vb" Inherits="project1._Inquiry" %>
I'm building a menu controller class and I have a database with the Controller/Action strings in it. I want to dynamically build a menu reading from the database and generating the URLs to use in the menu's <a href=''> HTML that the class renders. I can't use Html.Action() in my class. I've tried adding System. Web.Mvc, but this doesn't help. Is there a way to generate a page's URL when given the Controller and Action? Maybe referencing the MVC equivalant of HttpContext.Current like I used to do in WebForms?
View 3 RepliesI would like to know how I can create a class that consists of my database connection and then how I can call that class within my C# code. Consider simple database call as follows,
SqlConnection conn = new SqlConnection(
"Data Source=InOrder_Play;server=play;user id=web;pwd=mypass;Application Name=myap .NET Cart;Persist Security Info=False;Connection Timeout=90");[code].....
