Web Forms :: How To Show Arraylist Items In Listbox

Sep 21, 2010

i want to show the arrayliust items in the listbox, for that i had stored some data in array list, and now i want that if i gv any id which is in the array list its corresponding details are displayed in listbox. I had two fields ID, Name, and when i give id its corresponding name should be shown in list box.

View 3 Replies


Similar Messages:

Web Forms :: Show Message When There Are No Items In The Listbox?

Feb 7, 2011

I have a listbox and used the sqldatasource to load the items in the listbox. But if there are no items in the result then i need to hide the listbox and show one msg like "no items". I know to check the listbox is empty or not using "Items.Count " , but which event will i check this?

View 2 Replies

Web Forms :: How To Show Multiple Selected Items Of A Listbox

Jun 18, 2010

I had used listbox control with multiple selection mode. I stored id with comma delimiter in database.

e.g.

1. List Item One.
2. List Item Two.
3. List Item Three.
4. List Item Four.
5. List Item Five.
6. List Item Six.

Suppose user select item 2, 4 & 6. So I will store it as a 2,4,6 in database. This will work fine.

Now in editing I have to shows selection-bar for item 2, item 4 & item 6. So I had typed below source.

string strData ="2,4,6"
if(strData != null)
{
char[] separator = new char[] { ',' };
string[] strSplitArr = strData.Split(separator);
int x = 0;
for (x = 0; x < strSplitArr.Length; x++)
{
// lstWDef_PurchasesEdit.Items[x].Selected = true;
lstWDef_PurchasesEdit.SelectedValue = strSplitArr[x].ToString();
}
}

But with this statement I got only last item id as a selected item with selectionbar. In our example 2,4,6 only item whoseid is 5 got as a selected item.

if i use

for (x = 0; x < strSplitArr.Length; x++)
{
if (lstWDef_PurchasesEdit.Items[x].Value == strSplitArr[x])
{
lstWDef_PurchasesEdit.Items[x].Selected = true;
}
}

if the selected items are serial like 2,3,4 then it is displaying correctly..

if items are 2,4,6 then it is not selecting the items of listbox properly.

Is anybody guide me how to make item 2, item 4, item 5 as a selected item ?

View 4 Replies

Listbox - Show Only The First Items As Selected

May 1, 2010

I have a list box which is populated using a dictioanry. When I iterate throught the selected items using the following code, it always show only the first items as selected - even if the first item is not selected. Have you ever encountered this scenario? This problem occurs when I use dictionary for binding. On the other hand a generic list works fine.

private void PopulateListBox2()
{
List<string> subjectList = new List<string>();
subjectList.Add("Maths");
subjectList.Add("Science");
ListBox1.DataSource = subjectList;
ListBox1.DataBind();
}

Even it will work fine, if the values are unique. But in my scenario, the values are same; only key varies. The following works

private void PopulateListBox5()
{
Dictionary<string, string> resultDictionary = new Dictionary<string, string>();
resultDictionary.Add("Maths", "Lijo1");
resultDictionary.Add("Science", "Lijo2");
ListBox1.DataValueField = "Value";
ListBox1.DataTextField = "Key";
ListBox1.DataSource = resultDictionary;
ListBox1.DataBind();
}

The following code has the problem......................

View 1 Replies

Forms Data Controls :: Arraylist To Listbox - Multiple Values

Dec 13, 2010

i need to select the values inside an arraylist into a listbox control, when i am doing the loop of the arraylist only the last value of the array stays selected, i need all values of the array list to stay selected, here is the code.

' businessTypeList is an array list that contains values 39 31 51 but only 51 stays selected in the list box i need to maintain selected all three.

For i = 0 To (ddaEdit.businessTypeListID.Count) - 1

View 3 Replies

Web Forms :: Removing Multiple Items From Arraylist?

Mar 24, 2010

How do you go about removing multiple items from a array list?

I'm using the RemoveAt() method to remove but doing that resets the ArrayList's index which cause me problems if the user selects to remove 1 & 3 out of a 3 list array since once it removes 0 the array list now just has 0 & 1.

View 2 Replies

Checked Items In The Arraylist To Be Added?

Jan 28, 2011

having trouble only adding the checkboxstatus's that are checked to the gridview.

Protected Sub atasks_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim tasknamelist As New List(Of Boolean)

For Each row As GridViewRow In GridView1.Rows
' Selects the text from the TextBox

Dim checkboxstatus As CheckBox = CType(row.FindControl("tasknamebox"), CheckBox)
tasknamelist.Add(checkboxstatus.Checked) [code]....

View 1 Replies

How To Get An Arraylist To Display Only Predefined Number Of Items

Jun 28, 2010

ArrayList list = acontroller.ListForDisplay(articleModule.expireDate);

How can I get the "list" only display 10 items?


I don't want to set the number to display with stored procedure.

I've got another unrelated question, - from performance perspective, is it more efficient to sort data in stored procedure than sort using "icomparable" after I got a list of data into an arraylist? (30,000 record to sort.

View 10 Replies

How To Add Arraylist Items To Data Table Column

Feb 19, 2010

I have Data table Populated from database with Column Month which contains values .

and i have an other Array list which contains the Months from 1 to 12.

Now i have to insert the missing months into Data table from Arraylist.

how i do that because i have to shown the 12 months on report .

View 4 Replies

Creating A Bool That Checks A String For Items For An Arraylist?

Feb 22, 2011

I need to create a public bool that checks a string for items in an arraylist.

Here is a vague sample of what I'm talking about..

[Code]....

I'm not experienced enough with the foreach statement to quite figure out what I'm doing wrong here.

View 5 Replies

Web Forms :: How To Highlight The ListBox Items

Jan 26, 2010

I am moving an app from Silverlight back to ASP.NET. (Don't ask!) I really liked the ability to highlight ListBox items as the user moved the mouse over the items. I have been Bing'ing all morning and cannot seem to find any way to do this in ASP.NET with an ASP:ListBox. I tried setting the onmouseover event for the list items themselves. But that did nothing.

[Code]....

I then tried setting onmouseover event for the list itself. I can get the event, but I don't know how to determine which item I am over. I only seem to have the selectedIndex. If I am just moving the mouse, I have no selectedIndex.

View 3 Replies

Web Forms :: Spacing Between Items In Listbox?

Feb 8, 2010

I am not able to give spaces between two items in list box. I tried with css- padding, but no luck.

View 6 Replies

Web Forms :: How To Get All Non Selected Items From Listbox

Jun 29, 2010

How to get all items from Listbox. i need to load all item from Listbox to my database. how to get collection of item and how to save it into databse.

View 3 Replies

Web Forms :: How To Append Items To A ListBox

Jul 13, 2010

Can you append items to a listbox?

View 13 Replies

Web Forms :: How To Select All Items In Listbox

Nov 16, 2010

I start building asp.net web site for my office. I have a listbox with province ID and name. How do i select all item on page_load?

View 2 Replies

Web Forms :: How To Get Around Without Modifying The Id Of The Items In Listbox

Nov 16, 2010

When I have multiple entries with the same id in a list box the selected index is always the first instance of the item. How do I get around this without modifying the id of the items in my list box so they are unique?

View 2 Replies

Web Forms :: How To Insert More Than 100 Items In A ListBox

Jan 18, 2011

I'm trying to populate 1000 ListItems in a ListBox.

how to do it. Currently only 100 items are being displayed even though I set the capacity of the ListBox to 1000.

Below is sort of how my code looks like. :)

listBox.Items.Capacity = 1000;
foreach(entity ent in enitityCollection)
{
ListItem listItem = new ListItem();
listItem.Value = ent.Id.ToString();
listItem.Text = ent.Name;
listBox.Items.Add(listItem);
}
entityCollection has 989 records in it.

Code does not generate any error. only that at the end of the loop I only get 100 items mapped to my ListBox.

Is this how the ListBox is designed for?

View 3 Replies

Web Forms :: Remove Items From A Listbox?

Aug 17, 2010

txtquantity.text = lborderlist.Items.Count.ToString(); -> this codes adds how many you have input in the listbox, now i need to know the opposite..

how to remove items from a listbox but it should also counts the how many you have left in the listbox..

View 7 Replies

Web Forms :: How To Create Listbox Hyperlink Items

Oct 24, 2010

i want to create a dynamic listbox where items are links (each item is a hyperlink)

here 's my code:

Using sw As StreamWriter = New StreamWriter(Server.MapPath("~/Output/" & weeknumber & ".xls"))
Dim hlk As New HyperLink
hlk.NavigateUrl = ("~/Output/" & weeknumber & ".xls")...

View 5 Replies

Web Forms :: Removing Items From One ListBox Affects Another?

Apr 11, 2010

I have three listboxes, lst, lstA, and lstB, in which lstA is an instance of lst. The problem I have is that whenever I remove an item from lst, the same item in lstA is also removed. I have tried assigning a different ID to lstA to no avail. see my code below:

[code]....

View 3 Replies

Web Forms :: Selecting More Than 45000 Items In Listbox Using 1.1?

Feb 18, 2010

I've a list box which may contain 300000 or more records. I've another listbox . The user basically selects from the first listbox and adds to second lbx. There is button which when clicked will move the selected records from first listbox to second listbox.

Now if I select around 45000 records and try to move to second listbox .. it moves fine . If I select more than 45000 or so...it takes very long and eventually i get the "Action Cancelled". When I put a break point in page_init ..it does not hit. Is there a way I can restrict the user by selecting more than 40000 items. ie they should not be able to highlight more than 45000 records.

View 1 Replies

Web Forms :: Selecting Multiple Items In Listbox?

Aug 12, 2010

I have a dataTable that contains a specific column from a database. A listbox contains 100 list items in it. When page loads, I need those listbox items to be selected, whose value matches the value in the datacolumn of the datatable.

Following is the code i tried, but is not working. For some reason, it selects only the last item in the datacolumn.

if (datTableRelatedSchool.Rows.Count == 0)
{
}
else
{
foreach (DataRow row in datTableRelatedSchool.Rows)
{
foreach (DataColumn myCol in datTableRelatedSchool.Columns)
{
lstRelatedSchool.SelectedValue = row["RelatedSchoolPK"].ToString();
}
}
}

View 4 Replies

Web Forms :: Select ListBox Items By Using Any Text

Jan 26, 2010

I'd like to select ListBox Items by using any text. I mean like below For example, Text1.Text = "Item1, Item3, Item5" ListBox's Items are Item1, Item2, Item3, Item4, Item5. Selected ListBox Items will be Item1, Item3 and Item5. Here, I try to find the build-in function that count ',' in any string. How to code?

View 3 Replies

Web Forms :: Select Multiple Items In Listbox?

Feb 16, 2010

I'm using a listbox to save multiple selected value in db. I'm saving that values by seperating comma(,). In edit option i want to reterive the same value from db and want show multiple selected items in listbox.

View 9 Replies

Web Forms :: Coloring DropDown ListBox Items?

Sep 29, 2010

I have a situation where some dropdown listboxes contain some items, then there's a separator line, and then there are more items. The ones above the separator line reflect the "commonly used items". To better highlight these I was using code like this to individually color those specfic items:

foreach (ListItem item in ddList.Items)
{
if (item.Value == "-1")
unAssigned = true;
if (!unAssigned)
item.Attributes.Add("style", "color:#5558ff");
}

This code works fine EXCEPT that once a PostBack occurs then the highlighting disappears. The items in the dropdown listbox remain (without repopulation) but not the highlighting.

I'm curious why this is happening and whether there's a way for the highlighting to "stick" short of calling this code from the Page_Load event handler every Postback?

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved