Web Forms :: HttpApplication Class Application_Start Event Is Not Firing?

Jul 15, 2010

I have class say: Public Class GlobalFA : Inherits System.Web.HttpApplication

which has been inherited from HttpApplication class and having

Public Shared MaxLoginAttempts As Integer = 0 as member variables

Now i have added below event in it i.e(Application_Start event.

Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)

MaxLoginAttempts = 100

end sub

Now i am access this variable on my xyz.aspx.vb page but i am geeting 0 value .

it mean application_start event is not firing .

View 4 Replies


Similar Messages:

Web Forms :: Firing Event In Class File?

May 7, 2010

I have a form that contains a Table control. The columns and rows are created dynamically, so there needs to be a way to maintain the state of the table. The table ALSO has textboxes within it that will fire a postback and update a database entry when the text has changed. Kind of like an excel-type configuration.

Anyways, I figured the best way to do this was to create a class object to create a standardized way of creating the Table, and then storing it in the Session. Every page reload I then readd the table to the form, so it looks like it is maintaining state.

Now, everything works fine and dandy, but my textboxes have an event handler which is stored in the class file. I can type in the textboxes and the form reposts, but the TextChanged event never fires.

Here's my code for the file:

[Code]....

And here is the page that utilizes it:

[Code]....

View 2 Replies

Difference Between HttpApplication Class And IHttpModule?

Jan 31, 2011

What is the difference between HttpApplication class and IHttpModule? Are they both same or different?

I see articles that mention the same events in both the classes.

View 4 Replies

Configuration :: Application_Start (global.asax) Not Firing On Windows 2003 Server?

Jun 3, 2010

I have the same issue, I have added the On before the Application start, or Session Start and it is still not working.Application_OnStart or Application_Start is not firingSession_OnStart or Session_Start is not firing..Note that in my development environment it is firing (both of the names).When I am adding the Global.asax file, there is only one file (no .cs file). And when I am publishing the project, I am not getting the Global.asax file, I am getting a xxxxGlobal.asax.dll file on my bin folder...

View 1 Replies

C# - Accessing HttpApplication.Application Variables From A Class?

Jun 9, 2010

I set up various global parameters in Global.asax, as such:

Application["PagePolicies"] = "~/Lab/Policies.aspx";
Application["PageShare"] = "/Share.aspx";
Application["FileSearchQueries"] = Server.MapPath("~/Resources/SearchQueries.xml");

I have no problem accessing these variables form .ascx.cs or .aspx.cs file -- ie. files that are part of the Web content. However, I can't seem to access 'Application' from basic class objects (ie. standalone .cs files). I read somewhere to use a slight variations in .cs files, as follows, but it always comes throws an exception when in use:

String file = (String)System.Web.HttpContext.Current.Application["FileSearchQueries"];

View 1 Replies

HttpHandlers / Modules :: Create Own HttpApplication Class?

Dec 13, 2010

I want to create my own HttpApplication class, wherein I can handle methods like ExecuteStep. let me know if there are any examples to do this. Kindly provide some pointers to this...

I am using VS 2008. Basically I want to handle all events from httpApplication class (even before global.asax) before it reaches web pages inside Do other classes come into picture if I want to create my own HttpApplication class .

View 1 Replies

Way To Override And Inherit Default HttpApplication Class From Global.asax

Oct 19, 2010

am currently working on a web application, whereby I want to add code to the Application_BeginRequest method of the Global.asax file, without adding code to the Global.asax file, which sounds a little crazy, let me explain a bit more.If anyone has ever developed in sitecore before, they would have seen that the Global.asax file has empty methods, however it has 'using Sitecore;' and the global.asax file provided does not inherit from System.Web.HttpApplication.

View 1 Replies

Event Handlers Can Only Be Bound To HttpApplication Events During IHttpModule Initialization?

Mar 3, 2011

I am getting the following error

'Event handlers can only be bound to HttpApplication events during IHttpModule initialization.' at the following code (line in bold or double **)

protected void Application_BeginRequest(object sender, EventArgs e)
{
HttpApplication app = (HttpApplication)sender;
**app.EndRequest += new EventHandler(Application_EndRequest);**
}
protected void Application_EndRequest(object sender, EventArgs e)
{
UnitOfWork.Commit();
}

which is mentioned in Global.asax file.

View 2 Replies

MVC :: Application_start Event Called Multiple Times In Application

Sep 15, 2010

In my MVC application ,I am updating my web.config at runtime through application_start event.So, ideally it should be done only when the application is started.BUT in MY mvc application the application_start event of global.asax is being called multiple
times , even when i have not restarted the application.

Its being repetadly called when i am calling different actions , so the webconfig is repetedly updating & making my application very very slow. what's the reason & how to handle this .

View 2 Replies

State Management :: Want To Access Url In Application_start Event In Global.asax?

Dec 1, 2010

Suppose my website address is like http://localhost/MyWebsite

I wanted to access this url in Application_start event in global.asax, Can i some how get it?

[I know i can get it via application_beginrequest or other event]

View 17 Replies

AsyncPostBack Firing On Child Textbox Trigger, But TextChanged Event Not Firing?

Jan 22, 2010

I'm sure I'm missing something extremely obvious here, but at this point I can't see it so I need the help.Anyway, I've got a repeater inside of an UpdatePanel. As of right now, I've stripped it down to this, just to try and isolate the problem:

[Code]....

Whether I add the handler during itemdatabound or I add the handler within the repeater itself, it doesn't seem to matter...the event itself doesn't fire. The AutoPostback itself seems to fire, but the event itself doesn't.

View 3 Replies

Web Forms :: Firing Click Event On A User-control That Is Created From Another Event?

Mar 1, 2011

I have a gridview called gvResults. In the gvResults_RowEditing event I add a row below the one selected. In that new row, which spans all columns, I insert a user-control. There are two buttons and some textboxes in the user control.

My problem is that when I click one of the user-control buttons it never gets to the button event handler, I think because the user control is not recreated on the page postback. How can I have the user-control events fire before the parent page events fire?

I tried using an update panel, but I still get the parent posting back before the user-control events.

View 3 Replies

Forms Data Controls :: CheckBox Checked Changed Event Is Firing For Every Control Event?

May 8, 2010

I am facing one strange problem,I have a gridview in which the last two columns have checkboxes and on those checkboxes click event I am doing some database operations.I also have one checkbox that is outside the gridview which actually shows or hides some of the gidview columns.This was all working well but now I have shifted that grid to a user control because I have to use it in two pages.The problem now is,When the page first loads and I click the check box or any control in the page that is outside the grid then it works perfectly.But once I click any of the check box within grid view column then its behavior chages, now even if I click the checkbox that is outside the grid then also the checkbox_CheckedChanged event of the checkbox that is whithin gridview is fired.That checkbox event then behaves something like a page_load event that is called for every page load and for every event with in the page after it is called once.

View 3 Replies

Web Forms :: Button_Click Event Is Firing Twice?

Jan 6, 2011

I've stepped through the code and verified this action. It gets to the end sub and just loops again. Also does it on the production server in IE and Chome (that's all I've tried). Here is the button definition on the actual ASP page:

[Code]....

It goes through the code, sends me an email, gets to End Sub, then loops right back to the top of the sub and goes through the whole thing again, sending me a duplicate email, then exiting normally and sending them to the About page. This is the only code in the aspx.vb besides the class def and inherits statement.

View 2 Replies

Web Forms :: MultiView Event Not Firing

Jan 24, 2010

I have a two web forms with griviews that are bound to SQL through the same query in a class. Both have the same columns and footers. Both have a checkbox control in each grid row. The checkboxes on each form have OnCheckChanged event handlers that I put in the code behind. In fact, the html code is almost the same on both forms, and the OnCheckChanged code is exactly the same except for the fact that I have named them differently. AutoPostBack is true for both checkbox controls in the gridviews. One works, the other doesn't. The difference between the two is that the gridview row checkboxes that don't work are burried in a MultiView. Could that be why the codebehind event handler doesn't fire? Here is the html for the column:

[Code]....

Here is the html for the header of the gridview:

[Code]....

Here is the codebehind:

[Code]....

View 1 Replies

Web Forms :: Checkbox Event Not Firing

Feb 23, 2010

I have a div in which i have few text boxes and checkboxes, i wrote checkboxchanged event but it is not firing when i check or uncheck the checkbox i set the autopostback property of the checkbox = true but still no result. does any one have idea how to control this scenario.

View 6 Replies

Web Forms :: ASCX Event Not Firing?

Apr 19, 2010

I have a ascx like below

<%@
Control
Language="C#"

[code]...

View 1 Replies

Web Forms :: Click Event Not Firing?

Jan 17, 2011

I have an asp.net 2.0 c# site.

In that site, I have a drop down list which allows the user to select from a number of forms with AutoPostBack set to true. I have a OnSelectedIndexChanged event on the dropdown which loads the correct control depending on which option is selected. See below:

[Code]....

Now, that works correctly and loads the form as expected, but the server side onclick event within each ascx control now doesn't work. Is there some problem with button events when controls are added this way? When I add the control in manually to the page it works fine.

View 4 Replies

Web Forms :: Checkchanged Event Not Firing?

May 27, 2010

i'm creating and adding checkbox in my code behind to a parent control.

autopost back is true, it's posting back on being checked, but i'm not sure how to capture the fact that it's checked before I recreate/add it to the parent control again.

i can search all controls and find it prior to re adding it to the parent, but it never shows checked...

i have a checkchanged event on it that never fires, thing it's a flow/view state issue, but not sure how to reslove...

View 9 Replies

Web Forms :: Global.asa Event Not Firing?

Jan 22, 2011

I added some code to Global.asax on app start and I had to copy same project on a different machine and suddenly Global.asax file's event didn't fire. After doing lot of googling and trying many things I deleted the existing Global.asax and added a new one and then tested it. And I was surprised that it started to work again. so I would like to know what caused that previous Global.asax not to work?

View 5 Replies

Web Forms :: Session_OnEnd Event Not Firing?

Mar 26, 2010

I am losing User.Identity.Name unexpectedly, resulting in "out of the blue" redirects to Login.aspx.

This seems to happen randomly, often in the first few minutes after a user login.

To track this down I setup a Trace text file and append an entry to it when any page loads. I also write an entry from Session_OnStart event and Session_OnEnd event in Global.aspx. When user logs out, I call Session.Abandon, which should fire the Session_OnEnd event, and cause a log entry. However, this is not happening. It seems that Session.Abandon is not firing Session_OnEnd, inconsistent with info inhttp://msdn.microsoft.com/en-us/library/ms178583.aspx

Session_OnStart does seem to be firing as expected.

View 3 Replies

Web Forms :: Button Click Event Is Not Firing?

Jun 5, 2010

I have a webfrom on which I have some textbox controls, validation controls and button controls. When I click the button is validating the form but when I fill the text boxes with valid data and click the button nothing is happening i.e. the page is not posting back and button_onclick event is not firing. Below is the markup.

<table>

View 11 Replies

Web Forms :: User Control Event Not Firing

Mar 2, 2010

I am loading in a user control on page load and events are never firing. The user control loads fine with the correct information. it contains two dropdowns and an

calendar control. The dropdown selection changed event is never fired. I am not sure if there is something wrong while control is being rendered.

[code]....

View 3 Replies

Web Forms :: Second Time TextBox_TextChanged Event Is Not Firing?

Oct 28, 2010

I am generating UserName based on FirstName.LastName after that I am hitting the database and checking if this username (Like AAA.BBB) exists or not if not then I am generating email address, if yes then it is thorowing error which is correct. And after this when I changed the username (Like AAA.BBBC) and hit enter or tab then again it should check the database and generate the email but it is not doing any thing means I think I am missing the cursor control or Second time TextBox_TextChanged event is not firing.

[Code]....

View 1 Replies

Web Forms :: Treeview Not Firing SelectedNodeChanged Event?

Mar 14, 2010

I am trying o implement a non-databound treeview and capture its click event when a user clicks one of its nodes. Everything I tried does not fire SelectedNodeChanged event...why?here I even tried the example sited on msdn and it does not fire...http://msdn.microsoft.com/en-us/librar/system.web.ui.webcontrols.treeview.selectednodechanged.aspxthis what I have tried to copy and implement right from the sampkle:

Sub Select_Change(ByVal sender As Object, ByVal e As EventArgs)
Message.Text = "You selected: " & LinksTreeView.SelectedNode.Text
End Su
[code]...

View 8 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved