Currently have Main.MasterPage, a MyNewPage.aspx (with master page file) and a use control with buttons. Should I load the events in the MyNewPage.aspx during the Page_load or during the InitializeComponent() ?
Example: MyNewPages.aspx (HTML)
[Code]....
Or Should I do this??
[Code]....
Using vb.net/asp.net 2005.
I have a page books.aspx that has a control named authors.ascx.
Inside the authors control there is a "select" button I want to add some kind of listener or event handler (not sure of the correct terminology) so on the parent page (books.aspx) I can respond to the "select" button being clicked.
I have to pass the authorID from the user control to the parent page.
In my authors.ascx control I just created this event:
[Code]....
Now I need to write the function for SelectAuthorBtnClick and I think add some kind of listener in the parent page to listen and handle the event.
I have a web page where I'm dynamically loading one of a series of user controls. In each user control I call a general-purpose event to inform the web page that data on the user control has changed and/or new data is available. On the user control I define the Event Handler like this: public override event EventHandler DataOut_Handler; and then I force the event to occur like this:
DataOut_Handler(sender, e); On the web page I reload the previously loaded user control and wire up the event handler like this:
protected void Page_Init(object sender, EventArgs e)
{
DataEntryUserControlBase userControl = (DataEntryUserControlBase)LoadUserControl();
if (userControl != null)
userControl.DataOut_Handler += new EventHandler(UserControl_DataOut_Handler);
}
Note: It's "DataEntryUserControlBase" rather than "UserControl" because I constructed an intermediary base class to making casting simpler. Everything seems to work fine but I do have a question: When I step through my code, after the last line in Page_Init is executed I move the mouse cursor over top of userControl.DataOut_Handler but it reads null. The code is working fine but I'm most curious why I don't see any object associated with that item immediately after wiring up the event handler?
I have a dropdownlist in a user control and i want to perform different functions on the basis of the host page that hosts this user control when the selected index of the dropdownlist changes e.g. when the host page is locations i want the event to load locations for the selected item in the dropdown, when the hosting page is services i want to load services for the selected item in the dropdown. What is the best possible way to achieve this scenario.
View 2 RepliesI understand I need to load my dynmaic control on every postback and preferrably in Page_Init(). But my dyanmic controls are loaded from a dropdownlist selectedindexchanged event handler. Now after any postback, my dynamic controls are gone. How would I force it to load on every postback ?
View 2 RepliesIs there a technical reason for the existence of Page.PreLoad or is this just convenience to have a place where you can neatly place code that always have to be executed before the Load code? Is there a difference between adding code in the PreLoad event handler and adding code at the top of the Load event handler? And what would be a typical scenario where you use PreLoad?
View 2 RepliesThe code below creating a button control on my page dynamicly.
I would like to add to the control's Click event a new event handler.
How should I do it?
i'm creating the control on Click-event of one of the pre-defined buttons( btnSubmit) on my the page and
not at the Load event of the page:
[Code]....
Get the DataSource of GridView control in SelectedIndexChanged event handler?
View 6 RepliesI have a create user wizard on my page and in the event handler (Created User) I get extra information from the user via textboxes within the aspx etc.
I then do a response.redirect to another page.
What I want to happen is this
When the CreatedUser Event is fired, I want a Modal Popup to show up with a message Processing your registration.
once the registration code is processed it will close and the users get redirected.
On my ASPX I have the Modal PopUp and a Panel.
In the code behind in the handler I put ModalPop.show()
I am creating a web control by addin the html in the code behind, like this:
Code:
Dim sb As New StringBuilder
Dim myDiv As HtmlGenericControl = Me.theContainer
sb.Append("<table width='100%' cellpadding='0' cellspacing='0' style='border:0px;'>" & vbCrLf)
sb.Append(" <tr class='mainRow1'>" & vbCrLf)
sb.Append("<td align='left' style='border:0px solid white;'>Main Menu</td>" & vbCrLf)
[Code] ....
This will generate the html for the table in the codebehind then inject it into the specified DIV element. My question is, if I create a control in this manner, how do i add an event that will fire a method in my codebehind? For example, if i want to create a image button i would do it this way in the code:
Code:
<asp:ImageButton CommandArgument='<%# (Container.DataItem.objectValue) %>'
ID='ImageButton1' runat='server' OnCommand='Button1_Click' ImageUrl='~/images/folder.gif' />
but in the code behind i would do this:
Code:
sb.Append("<input type='image' name='ctl00$ContentPlaceHolder1$importWizard1$folderControl1$folderRepeater$ctl04$ImageButton" & myCounter & "'")
sb.Append(" id='ctl00_ContentPlaceHolder1_importWizard1_folderControl1_folderRepeater_ctl04_ImageButton" & myCounter & "'")
sb.Append(" src='images/folder.gif' style='border-width:0px;' />" & vbCrLf)
But I cant add the OnCommand because it wont be rendered properly.
i have a calender control like this
<asp:Calendar ID="CldrDemo" runat="server" BackColor="#FFFFCC" BorderColor="#FFCC66"
OnSelectionChanged="CldrDemo_SelectionChanged" OnDayRender="CldrDemo_DayRender">
</asp:Calendar> [code].....
i want to call the event handler for the dropdownlist - selectedIndexchanged and i have added it also like this
protected void ddlBlist_SelectedIndexChanged(object sender, EventArgs e)
{
}
but this is not getting fire when i am changing the item of the dropdownlist.
I want to apply a key press handler to a User Control. So there is no <body> there. where I should place onkeypress="keyPressHandler(event)"?
View 35 Repliesi have simple repeater control on my page:
<asp:Repeater id="Repeater1" runat="server" DataSourceID="SqlDataSource1">
<ItemTemplate>
<asp:TextBox id="txtBox1" runat="server" Text='<%#Eval("attributename") %>'></TextBox>
<ItemTemplate>
</Repeater>
I'm bounding data to repeater control by using SqlDataSource Control
bounded data is something like this:
attributeid attributename
1 color
2 size
How can I get access to attributeid values in Repeater control's ItemDataBound event handler,
I tried to use DataBinder.GetPropertyValue(container,"attribuetid"), but I can't set container, am I doing right, or maybe I should use another approach.
i try to create dynamic control and have a single event handler to ease the fireevent how do i do it?also can i declare a single event handler to parent control and be use by child control of the same type
in example:
creating htmlanchor name aa
aa.Control.Add(any anchor)
after adding the control
declare the event handler
I have a control which has an ImageButton which is tied to an OnClick event... Upon clicking this control, a postback is performed and the event handler is not called. AutoEventWireup is set to true, and I've double checked spelling etc.... We haven't touched this control in over a year and it has been working fine until a couple of weeks ago.
We have made changes to controls which load this control... so I'm wondering, what kind of changes could we have made to stop this event handler from being called? There is quite a bit of Javascript going on, so this could be the culprit too...
I have a question connected with controls and event handling. Lets say I want to create a LinkButton.
protected void loadLinkButton()
{
ContentPlaceHolder content = (ContentPlaceHolder)this.Master.FindControl("MainContent");
LinkButton lnk = new LinkButton();
lnk.ID = "lnikBtn";
lnk.Text = "LinkButton";
lnk.Click += new System.EventHandler(lnk_Click);
content.Controls.Add(lnk);
}
Here is the event handler:
protected void lnk_Click(object sender, EventArgs e)
{
Label1.Text = "ok!";
}
If I run the loadLinkButton function inside Page_Load everything is ok. But when I try to run the loadLinkButton by clicking simple button, link button is created but event is not handled.
protected void Button1_Click(object sender, EventArgs e)
{
loadLinkButton();
}
I there any way to solve it? Or loadLinkButton must always regenerated on Page_Load, Page_init etc.
I have a Custom WebControl. Inside this control I add a button and I want it to access an EventHandler that is on the WebForm where the control is included. The handler handles with controls from the WebForm, so it has to be there. I could probably manage to take the button out of the control, but it would be better to keep it on the control, for organization sake.
public class LanguageSelection : WebControl
{
private List<Language> _Languages;
private CSSImageButton btnOk = new CSSImageButton();
[Code]....
I have got most of this code online, which does not quite work, can something like this be done to produce a button click event to indicate that a built in button on the datapager control has been pressed ?
DataPager Pager1 = ListView1.FindControl("DataPager1") as DataPager;
{
foreach (Control cPagerControls in Pager1.Controls)
{
if (cPagerControls is Button)
{
Button OnClick = cPagerControls as Button;
OnClick += new EventHandler(OnClickMethod());
}
}
}
I've created a UserControl that is dynamically placed onto my page during the Init event. It populates and works great, but I'm left scratching my head at how to retrieve data from it during a postback.
It's effectively a multipick combobox that is manipulated entirely using clientside JavaScript (I'm using jQuery heavily). Inside the control container element, I render an empty DIV element that contains all of the selected items. As the user selects items, I generate DIVs within that container DIV that includes some markup. Of interest to me on the server side are the contents of a couple of INPUT fields.
After selecting an item, the rendered HTML looks something like:
[code]....
I may be completely off track and this may actually be impossible (or a stupid idea). The only alternative I can think of is to emit actual ASP.NET controls and hook the built-in event handlers.
I have created a web user control called Activity. I have defined a public-facing event on that web user control called OnActivityDelete. There is a delete button in the Activity control. When the delete button is clicked, the Activity control fires the OnActivityDelete event. I am using this web user control in a repeater. I assign an event handler to the OnActivityDelete event on the repeater's item data bound event. When I click the delete button for the Activity control, the event fires from the Activity control, but it never hits the event handler in the page that's using the control. (I have stepped into the code with the debugger and confirmed this behavior).
My suspicion is that this behavior has something to do with the fact that the event handlers are added in code behind when I bind the repeater to a datasource, which I only do if the page is not posting back.Is it possible to define the event handler for the Activity control in the markup of the aspx page? If so, will this solve my problem?If not, do I have to bind the repeater and hook up to the events every page load in order to solve my problem (this works, I just tested it), or is there some viewstate trick to getting the events to persist? Markup of Repeater on page:
<asp:Repeater ID="rptrActivites" runat="server" EnableViewState="true">
<ItemTemplate>
<div class="activity">[code]...
Page's code behind:
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
If Not Page.IsPostBack Then
GetActivities() [code]....
I use this code to obtain a selected data from GridView control. I created a user control and reference it to ASPX page. However, for some reason I can not access public methods IndexChanged to retrieve information of selected line.
*
User controls:
*
Public gridRow As GridViewRow
Public Event IndexChanged As GridViewSelectEventHandler
*
Protected Sub GridView_SelectedIndexChanged (sender As Object, e As EventArgs) Handles gv.SelectedIndexChanged
******* gridRow = Grid.SelectedRow
******* RaiseEvent IndexChanged (sender, e)
End Sub
*
ASPX page:
*
*
grid.IndexChanged - there is no such event in the selection (the grid is the name of the user control)
I have a gridview called gvResults. In the gvResults_RowEditing event I add a row below the one selected. In that new row, which spans all columns, I insert a user-control. There are two buttons and some textboxes in the user control.
My problem is that when I click one of the user-control buttons it never gets to the button event handler, I think because the user control is not recreated on the page postback. How can I have the user-control events fire before the parent page events fire?
I tried using an update panel, but I still get the parent posting back before the user-control events.
I have a control that handles commenting. In this control, I have set a delegate event handler for sending an email.
I then have various types of controls, e.g. blog, articles etc, each of which may or may not have the commenting control added (which is done dynamically with me not knowing the id's), i.e. the commenting control is added outside this control. Each of these controls handles it's emailing differently(hence the event).
What I'm trying to determine, is how to assign the event in the parent control. At the moment, I'm having to recursively search through all the controls on the page until I find the comment control, and set it that way. Example below explains:
COMMENTING CONTROL
public delegate void Commenting_OnSendEmail();
public partial class Commenting : UserControl
{
public Commenting_OnSendEmail OnComment_SendEmail();
private void Page_Load(object sender, EventArgs e)
{
if(OnComment_SendEmail != null)
{
OnComment_SendEmail();
}
}
}
PARENT CONTROL
public partial class Blog : UserControl
{
private void Page_Load(object sender, EventArgs e)
{
Commenting comControl = (Commenting)this.FindControl<Commenting>(this);
if(comControl != null)
{
comCtrol.OnComment_SendEmail += new Commenting_OnSendMail(Blog_Comment_OnSendEmail);
}
}
}
EDIT:
The reason I ask is that if I search from this.Page as the initial control, I am worried about time taken to search down the control tree to find it. Each different type of page would be different in how many control it would have. On some testing, it returns back quite quickly the result.
I was wondering if there is a way to generate the event handler of a control directly in the markup view and not in the design view.
View 6 RepliesI got an event handler like this, in this event, i wanted to call another button click event. How can I do that?
[Code]....
if (ds.Tables[0].Rows.Count == 0)