I'm trying to make a template control using UserControl. I have two issues: When I use the template it only show the Body text - not the Title text - why?. And I don't know how to implement styling (css) - can you tell me how to use a custom css file (Container.css) in .the App_Themes folder?
My code:
[Code]....
Iam trying to use a UserControl named CheckBoxControl as value for the ExpandControlID/CollapseControlID attributes of the CollapsiblePanelExtender. It works fine when I use a normal CheckBox instead.
<uc:CheckBoxControl ID="ucHaftpflicht" runat="server" OnCheckedChanged="UpdateStatus" ControlLabel="Haftpflicht" />
<asp:Panel ID="HaftpflichtPanel" runat="server">
</asp:Panel>
<asp:CollapsiblePanelExtender ID="CollapsiblePanelExtender" runat="server" CollapseControlID="ucHaftpflicht.CheckBox" ExpandControlID="ucHaftpflicht.CheckBox" TargetControlID="HaftpflichtPanel" />
When I run the site, most ajax controls on my site disappear and I get following errors in firefox script error console:
Fehler: Sys.InvalidOperationException: Handler was not added through the Sys.UI.DomEvent.addHandler method.
Fehler: Sys.ArgumentException: Failed to find element "ucHaftpflicht.CheckBox"
Parameter name: CollapseControlID
I've got a problem with my title displaying with the default template. It gets cutoff in firefox and IE 8 (in standards mode) by the content div.
View 1 RepliesI'm just getting into AJAX (little late I know) and am walking through some of the tutorials on the ASP.NET/AJAX site. One thing I've noticed is that I cannot get the UpdatePanel to work (meaning, prevent a full postback of the page) in the ASP.NET Web Site template. I can use the EXACT same markup, code, and web.config in the AJAX 1.0-Enabled ASP.NET 2.0 template and everything works as expected.
Markup:
[Code]....
[Code]....
[Code]....
I'm trying to generate jquery vertical tabs using jquery template. I use this code :
[Code]....
Everything works greate on Firefox, Chrome, Opera and Safari but in IE this code doesn't work. When i looked on html source i saw that in IE instead on
[Code]....
I get
[Code]....
Because of this jqury vertical tabs doesn't work on IE.
How would I do visual editing of a template for a control X that is embedded within a user control?.
Of course, in this case the Control X is not directly available to the end user.
NOTE: I do not want to create another user control to the template.
I have dynamic button in tab panel. I want to load a usercontrol through this button in tab panel. but it does not work!!! would some body please tell me why is that happen? I also debug my code and it works correctlly but user control does not load in tab panel.
[Code]....
I am trying to dynamically load query form as a user control and build a sql statement based on user selection. I have a dropdownbox for Tablename, FieldName, ConditionalOperators and Value Field. Once the user makes a choice and causes a postback I loose my QueryForm (UserControl) and the selection Changed event never gets fired. I tried reloading the QueryForm on Page Init, still no luck.
View 5 Repliesi'm trying to make this work for several days but it just doesn't work.
this is my code:
aspx page:
[Code]....
webservice:
[Code]....
this was downloaded from this website.
the problem is that the page loads fine but no autocomplete occurs.
Is it possible to change the ascx file used by a usercontrol at runtime?
For example in my page i have
<ctl:SampleControl runat="server" />
in the web.config I have
<controls>
<add tagPrefix="ctl" tagName="SampleControl" src="~/UserControls/SampleControl.ascx" />
</controls>
At runtime I would like to be able to change the ascx to another path, it would still be inheriting from the same usercontrol codebehind, it would just be a different template.
I am a new to WCF. I have written ajax to use a web service before, but on this project I am trying to use ajax to WCF.After I build the project and wcf using ajax, I receive the return successfully. But, 10 or more minutes later I don't get a return, the ajax calls the error function, and the fiddler returns nothing.
If I rebuild the project without any source modifying, I receive the return successfully again.
I have a usercontrol which needs to work slightly differently according to the attributes of its owning page.Is there a way to determine the owning page from within the user control?
View 1 RepliesAccording to the docs. [URL] There is an Separator Template for a DataList. However, when I use the built-in tool tip help, it does not show. If I manually type in a separator template it crashes my design time environment completely...
Not sure what I'm missing here. I tried an imagetemplate and a line but thats not really working because I need the image in the data field area not the headertext area.
The forms works fine in Firefox and I was able to get an email from it. Here is the code below:
Partial Class _Default
Inherits System.Web.UI.Page
''' <summary>
''' Actions when the Send button is clicked.
''' </summary>
'''
Protected Sub btnSend_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSend.Click
If Not Page.IsValid Then Exit Sub
'Create instance of main mail message class.
Dim mailMessage As System.Net.Mail.MailMessage = New System.Net.Mail.MailMessage()
'Configure mail mesage
'Set the From address with user input
mailMessage.From = New System.Net.Mail.MailAddress(txtEmailAddress.Text.Trim()).........
what I want to do is: in one page, I got a navigation pane on the left and the content pane on the right. both of them are 100% height in the web page and both have its own scroll bar. However, I failed to set the height:100% although i've already set height:100% to html,body,div,table,tr,td. it just doesn;t work. if remove the "runat=server" from the form tag, it works fine. don't why~~~
Is it actually a bug of asp.net?
[Code]....
It seems my website doesn't accept some CssClass defined into my <asp:Menu>.Here is how I implemented it :
[Code]....
and here is my Style.css which works for everything else :
[Code]....
What I don't understand is that my .menuItems works perfectly good...For the "hover" style, if I try with ".menuItems:hover" it will work but I don't know why ".menuItemsHover" doesn't...What am I doing wrong with this code? I followed a lot of tutorial but no one seems to work...
I have a usercontrol that is in an asp.net page that contains a button. The event on the button does a simple response.direct all is fine if the page doesnt contain a query string however if the page contains a query string. e.g. default.aspx?id=12345 then the postback doesnt occur on the button.
Is this a common issue? what do I need to do to enable postback on the button if there is a querystring?
Why the following code (asp.net 1.1) does not work?
//call.aspx
<script runat="server">
namespace DOTNETMath {
void Page_Load( Object s, EventArgs e )
{
ConstClass.DisplayEmployee("Testing");
}
}
</script>
//commonFunction.cs
namespace DOTNETMath {
Public Class ConstClass {
Public Shared Function DisplayEmployee(String x) {
Return x + " Hello ";
}
}
}
I have a problem, when i´m working offline, my favicon appears, but when i put my web site online in a iis server, doesnt appear
i have this:
[Code]....
Why this doesn't work?
[Code]....
Error: The HTTP verb POST used to access path '/WEB_Salaries/Programs/CALC.EXE' is not allowed.
I have set the MaxLength in the textbox and don't know why I can type more than the max length characters in the textbox. Do you know why? ....
View 9 RepliesI have been usiing thr profile provider in a net2.0 application and it works fine. I am now working on a 4.0 project and the profile doesnt work. I have the aspnet_Profile table in SqlServer and I have the code in the config.
[Code]....
But I don't get a Profile.XXX in the intellisense? What am I missing?
The following is trimmed down from the web.config file I'm using in a website that runs in Windows 2003 R2.
<system.web>
<!-- Required to use BetterImageLink and BetterImage class -->
<httpHandlers>
<remove path="*.asmx" verb="*" />
[Code]....
I'm migrating the site to a new server running Windows 2008 R2. When I tested the site, I fould that the BetterImage control doesn't work. I use the BetterImage control liberally throughout the site, so this is a real problem for me. I emailed the developer and he responded that I have to change the location in the web.config where I register my custom handlers. How do I do that? And are there any other changes I need to be aware of? How different is the web.config between the two Windows versions?
I have an issue with my asp:Wizard, where basically I am calling the MoveTo function and it is not moving to the desired step. I have used the MoveTo function elsewhere in my wizard, but I only have the problem with this specific location.
[Code]....
In the above code, ValidateSelectModelStep() returns false, and so the block of code is entered. urchaseWizard.MoveTo(this.SelectModelStep) is called, and yet the Wizard just continues on to the YourDetailsStep. This however is not he case for the other steps. When the validation fails on the other steps, and purchaseWizard.MoveTo(currentStep) is called, the Wizard correctly goes to the current step and displays the errorText. What is really bizarre, is that if I change the step that we want to go to when ValidateSelectModelStep() fails, the Wizard will correctly go to the specified step. So it seems as though there is only the problem with when you are on the first step, trying to MoveTo the first step. Even more so, is the fact that if I try to call purchaseWizard.MoveTo(this.SelectModelStep) from some other step in the wizard, it correctly brings you to the first step. Note: In the first step I have a repeater, which for the validation I need to loop through all of the items and find if one is selected. My Validation function for that works fine, and the MoveTo function does get called. (I checked it through debugging) Does anyone have any ideas why this is happening and how to stop it so my validation restricts progression through the wizard correctly?
I wrote a statement such that
cmd ="select [title] from products where sku='% "3.5 caddy" %'"
this statement wont return anyfin where there is products with titles startin with 3.5 or ending with caddy or containing 3.5 caddy but just not together for example there is this title "3.5" IDE to USB 2.0 Aluminum External Silver HDD Enclosure Caddy" and that search of 3.5 caddy wont pick this item up as 3.5 is at the start and caddy is at the end.
