I am using the original masterpage template in VS2010 to have a consitency with all my web pages for my site. However, i noticed that the web page does not fill the browser completely, it is much smaller. How can I adjust the size of the web page so that is fills the browser completely?
I have looked at all the options in properties but had no luck so far!
I have a page with features supplied from both a master page and a child master page.In the content placeholder for the head in both master pages I have supplied the link to the stylesheet for the site.In Design View in VS 2008 the CSS code seems to be functioning correctly.When viewing in a browser the CSS does not appear to be applied at all.
Here is the CSS code for the div elements within the main content placeholder:
[Code]....
My Project is a normal web site, not a Web Project, and I am using VS 2005.
I am trying to define common Master Page Type in app_code which has an area to display error messages and the like. Very simple.
I added the following in app_code:
[Code]....
Also, I added the following in Master Page Source Declaration:
[Code]....
Also, I added the controls tblrowErrMsg and lblErrMsg as server controls to the Master Page.
Why I am doing this ?
This will allow me to display error messages from nearly any where inside the code in code-behined, app_code, and other core Class Projects (DLL).
I have web application workung with master page.I want to know when the user is closing the browser' then I'll raise event to clean' session variables.How can I detect the browser closing/I tried the unload jscript event' but it fired when I move from page to page.
View 2 RepliesI have a page which includes serveral gridviews, pulling out data from my datasources. At this stage, the parameters are set withing the page, however it will use a querystring at the end of the url. Once the page is loaded, i then have an Email function calling a HTML reader, which basically captures the content of the page and pushes to the body of the email and then emails it out.
The issue i am having is where to place this stagement. I have tried to insert the email function in the Page (load complete) event, but it still seems to send out over 20 emails, which to me, means that the page hasnt finished? loading and is constantly calling the email function.
At this stage, i need this page to load .. i cant think of any other way, i can get the data sent to an email without the interim medium; the page.
I'm trying to set up the SSL in my web app, but don't know if i'm doing it right, or if even i'm taking the right steps in the right order.I have a function in a class that returns the secure URL (https://mydomain.com/...aspx) if the current url is not secure (http)
[Code]....
(Though in develop environment It's like "https://localhost:port" + rawUrl)
when the function returns ssl value, if it's not empty, then the master page redirects to the new url... but the browser is not showing it...
I have a master page setup that is used throughout my site that is basically a header with a menu. I recently added a textbox and a button to this master page which is to be a quick search box that is available anywhere in the site. When a user enters text into the search box and hits the button, I need to load the actual content page which is used to search and show search results (which also uses this same master page), and have the text entered available so the search can be triggered automatically. Again, this search text box and button is now in my master page so it could be triggered from anywhere in the app... it serves as a convenient way to do a basic search from anywhere in my app, without having to first navigate to the actual 'search page' that already exists. You can also navigate to the actual search page, which uses the same master page, where there is many more search options.I'm thrown off by the master page arrangement, which I have not used until this project. What do I do?
View 4 RepliesHow to Disabling the form elements until the page is rendered completely.
View 1 RepliesHere is the thing. I have an aspx page with NO master page. I have two resource files with the same name (and specifying the language) in the App_LocalResources folder. If I do something like text="<%$ Resources:lblUser %> works fine. What I do to test it is change the browser's selected language.
But, if I do the same in a MasterPage or in a Page that is inside a MasterPage... when changing the Browser's language and refreshing... I'm still getting the default language...
I've been reading some threads about this but the situation was a little bit different.
I am using Master page and Content page combination.But how can i access <body> tag and it's event (onload, onunload) of Master page in .aspx page that is not a content page.
View 12 RepliesI have a master page homeMaster.aspx and many content pages. However the situation is I have few .html pages. Now when a user clicks on a link the html page should get loaded.inside the master page. The problem is these are .html and not content page with .aspx.
View 4 RepliesI have a master page containing a tree and 3 dropdown lists. I am populating a context menu on right click of each node, and when clicked on any item of the context menu, it navigates to required pages.
My problem is after navigating to the required page, the selected values from the drop down lists and the selected node from the tree are getting cleared.
I can set the selected values for the dropdown lists by making some properties in master page.
But how do i maintain the selected node?
In my content page, i have got the valuepath of the right clicked node.
Or is there any other way than setting the properties in master page?
I'm trying to dynamically change the look of my main master page depending on what nested master page that the current content page is using .
So for example.
Main master page = main.master
My nested page = nested.master (uses main.master)
content page = content.aspx (uses nested.master)
So in the Page_Load event of main.master I want to add a switch statement that will check to see what nested master page is currently being used by content.aspx, or whatever content page is loaded.
So far I have got
protected void Page_Load(object sender, EventArgs e)
{
string nMaster = //This is the line of code that I am looking for.
switch(master)
{
case "nested.master":
//all my logic here.
break;
}
}
I've recently noticed this in my VS. What exactly is an Ajax Master Page and how is it different than a regular master page?
View 2 RepliesI have a question about master page.After i pushed button i would like to change my master page to another master page for that page, is that possible?
View 4 Repliesi have two web pages, i have 6 text box in first page and a gridview in second page, i want when a user fill one or two or....all of these text box, the data pass to second web page through the Querystring and the grid view in second page fill, i wrote a store procedure and configured my grid view correctly but it does not work , i think i have a problem in my first page behind code.
this is my code:
[Code]....
What I have is a masterpage with some tables and contentplaceholders. What I want in some pages is that a table be removed because i have 3 columns on 3 tables and i need 2 columns only(so minus one table). Now i can access the table and give it some css through code but what i give is width:0 (and visibility:hidden if ever successful). The table contains one contentplaceholder inside a <td>. I can also access the td.The problem is that the table (thus contentplaceholder) will not go away.
It remains as entity as extending the second column will just push it downside(behavior expected when the column3 with contentplaceholder is present). So is there a way to remove the table holding the contentplaceholder?Only thought is to hide it and push it right that i admit i haven't tried it yet, I suppose it would be easier to make another master page but the problem is that i want specific designs on many pages so if this does not work i would either have to make many master pages or just use simple pages.
Is it possible to inherit a sharepoint master page(as a parent) in another application's master page which will be treated as child (i.e. after integrating that standalone application with the sharepoint application)? I am totally new to Sharepoint..
View 2 RepliesI have a nested master page that has its own master page. The parent master page has a property defined in its code behind.
Public ReadOnly Property SelectedPage() As String
Get
Return _selectedPage
End Get
End Property
How can I reference the parent master page's property from within either the child master page's code behind Page_Load or aspx template page?
My master page looks like:
<head runat="server">
<title>
<asp:ContentPlaceHolder ID="PageTitlePlaceHolder" runat="server" />
</title>
Content pages look like:
<asp:Content ID="TitleContent1"
ContentPlaceHolderID="PageTitlePlaceHolder" runat="Server">
My Page
</asp:Content>
This works by placing the content page specific title on the page ("My Page" in this example). Now I want to add a global prefix to the title in my master page for the site name. So I want:
<head runat="server">
<title>
Example.com:
<asp:ContentPlaceHolder ID="PageTitlePlaceHolder" runat="server" />
</title>
However, when I do this content pages are still rendered without "Example.com" in the tile, it's like it's ignored.
Why is this happening and how can I achieve this?
I want to show a loading image before the content of the whole page is loaded. How to achieve this? I'm working in ASP.NET.
View 3 RepliesI need to trigger a C# code behind function right after an ASP.NET page is completely displayed. Is there an event to program? If not, do how to do it?
View 4 RepliesI want to share a common page load and page init events sequence between Master page and child page and User Control as described below:
Let us have the following components:-
1. TestMaster.master -> It is the master page
2. TestChild.aspx -> It is the Child page
3. TestUserContrl.ascx -> It is the UserControl present within the TestMaster.master page.
[code]...
I have some logging that has to be done, which are some database update or inserts.
However this logging is of no importance to the user, so I only want to process the data/logs after the page is completed for the user.
As of now, if I process the data while the page is loading, I go from 1.4 to 2.0 speed (server side time processing of code), which is quite a bit comparing it is of no use to the user.
So I want this code only executed after that the page is complete.
I've been checking out Ajax, async pages etc, but the problem is it still gets executed before the page is rendered to the client, which means the client will have to wait longer then it is not being processed.
I've been checking out Threadpool.queueBackgroundWorker, however if I get it correct, this will still be executed before the page is shown to the user, as it has to complete before the prerender.
Then I thought about creating a new thread, and do the processing there, which would not have my page waiting to complete the data/logging.
However when I have 100 or 200 users loading pages at the same time, then that would mean I would be creating 200 threads on those loads, which I doubt will be good for performance. So if I want to solve this, I would have to create my own threadpool and only assign for example a max of 40 threads to it which can process the data.
All I want to get done, are some update/inserts into database after the page is rendered and shown to the user. I don't want the logging to slow down the pageload for the users obviously. I want that logging or no logging makes no difference to the pageloadtime for the user at all.
I have a [WebMethod] within an aspx.cs file. It seems that whenever a second call to the method is made via AJAX before the first call is fully executed, the web method completely stops functioning until the page is reloaded.
View 2 Replies