xamount is receiving this message on the last line. The session is being set in the previous page. Is there a way to resolve the message or should I just use a previous page postback
[Code]....
----> I have datatable which is passing to another page in session variable.
----> Now on another page i take the session variable into datatable.
datatable ds_table = new datatable();
ds_table = (datatable)session["table_value"];
----> so problem, is that , when i filtering some rows from ds_table . that taking effect in the session variable. if some rows deleted from ds_table. then it is also deleted from session variable.
----> so, anyone tell me why is this going to happene?
I am declaring a list in my class, populating the list in page load and using the list in various methods in this class. But, I get this error at every instance where I use this list in the methods. Error: System.NullReferenceException: Object reference not set to an instance of an object.
public partial class ViewBG1 : HealthServicePage
The line "Return strLoc" below shows the green line underneath strLoc with the message "Variable 'strLoc' used before it has been assigned a value." In fact, it returns the value just fine to the calling module, so I'm wondering why it's giving this message and how to prevent it.
[Code]....
[Code]....
The variable is assigned a value in another class like this:
[Code]....
[Code]....
I have a publice variable to be used in the same webpage. when the user click on button 1, it does some process and assign a value to my public variable. After that, the user can click on button 2 which needs the public variable value to function. However I see the value of the public variable is 0 when I click on button 2.
I've got a detailsview control on a page. The table that it interacts with has a DateTime column in it. This column is nullable, and a lot of the records have null for that value. In the EditItemTemplate I've got a calendar control. When I try to put the DetailsView into edit mode, I get the following error message:
System.InvalidCastException was unhandled by user code
Message=Specified cast is not valid.
Source=App_Web_srpmlyjd
StackTrace:
at ASP.entries_aspx.__DataBinding__control44(Object sender, EventArgs e) in c:inetpubwwwrootMediaLibraryEntries.aspx:line 103
at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding)
at System.Web.UI.Control.DataBindChildren()
I am convinced that the problem is the null values in the DateTime column of the table. I've done some web searches on this, and some have suggested placing some dummy values into that column, but that seems more like a kludge, rather than a solution. How do I keep nulls in the table, and yet not have that preceeding error come up when a user tries to edit the selected record?
I am trying to access a user's login credentials to find out if they are an admin user or not. This way I can assign session variables to them and show certain aspects of the web page that other users won't see. I unfortunately keep getting this error when trying to dim a variable to assign the values too.
Variable Nuid is used before being assigned a value.
Variable AdminUser is used before being assigned a value.
Code:
Protected Sub checkAdmin_Click(sender As Object, e As EventArgs) Handles checkAdmin.Click
Dim strNuid As String = Request.Form("Nuid")
Dim cnString As String = ConfigurationManager.ConnectionStrings("snfTimeSystemConnectionString").ToString()
Try
Using cn As SqlConnection = New SqlConnection()
cn.ConnectionString = cnString
[Code] .....
I was working on my homework, making a website obiously, but I have a small problem with the griedview. I wanted to add a button on the end of the row, but I receive some error notifications and warnings too...
Code:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Web.UI.WebControls
Partial Class Search
Inherits System.Web.UI.Page
[Code] ....
There is this error too:
SeverityCodeDescriptionProjectFileLineSuppression State
ErrorBC30518Overload resolution failed because no accessible 'Add' can be called with these arguments:
'Public Overloads Sub Add(column As DataColumn)': Value of type 'ButtonField' cannot be converted to 'DataColumn'.
'Public Overloads Function Add(columnName As String) As DataColumn': Value of type 'ButtonField' cannot be converted to 'String'.GIPH:GIPSearch.aspx.vb31Active
I'm pretty new to silverlight and asp.net but I have a strong background in c#. I am currently developing a c# asp.net application with silverlight elements. I was wondering if it was possible to have a user say click on an image that has a certain value associated with it and have that value access from a c# variable held outside the silverlight application.
View 2 RepliesI'm fairly new to ASP.net development as may have been noticed by some of my other posts and so here goes another one.I have a web page in which I allow users to enter data that will be used to populate a database and then graph data based on the information that was saved in the database. I have 10 sets of criteria that the user can enter and as they enter values for each individual set, I make sure all the parameters are filled in and set a variable called blnParm1, blnParm2, blnParm3, etc. Anyway, as each DropDownList box fires off an event the values of my blnParm variables is reset because each time the event is fired the page is PostBack therefore my variables are redeclared. I know the page is being PostBack because each of the DropDownList boxes have AutoPostBack set to true. I had to do this so that I could get the OnSelectedIndexChanged event to fire for each of the DropDownList boxes. So, how do I preserve my variables through this PostBack or how do I get the events to trigger without calling AutoPostBack?
Some more info, my variables are declared globally in my aspx.cs file as private bool. The code is working like it should as far as populating drop downs dynamically based on other data input by the user, the controls all have their values preserved as the page is PostBack.
I am getting an exception on a linq to sql query:The null value cannot be assigned to a member with type System.DateTime which is a non-nullable value type.
[Code]...
I got the following error when i tried to insert a new record after the run my project, so what does this error indicates?
"{"Cannot insert explicit value for identity column in table 'Articles' when IDENTITY_INSERT is set to OFF."} System.Exception {System.Data.SqlClient.SqlException}
"
When i click on the page that represents a controller the following error was displayed:-
"The null value cannot be assigned to a member with type System.Int32 which is a non-nullable value type"
On this link of code
var articleapproval = articletyperepository.FindAllArticlesRequireMyApproval().ToList();
while the FindAllArticlesRequireMyApproval execute the following LINQ statement :-
var articleapproval= articletyperepository.FindAllArticlesRequireMyApproval().ToList();
where this methods calls the following LINQ statement:-
I have a problem with a SessionVariable. I will explain what is happening:
1. From the default.aspx I send Session["LoginByAdmin"] = "Dummy"; and then redirect to this page where I have the code below. So the Page_Load sees that this Session["LoginByAdmin"] != null and enter this page. This works fine !
2. In the Page_Load, I later fill a ListBox1 with foldernames.
3. With Button1_Click1, I will now delete the choosen Folder in the ListBox1 wich works fine the first time and the ListBox updates the new existing folders in the ListBox. (I have wrapped this inside an updatepanel)
The problems comes now when I try to delete a choosen folder in the ListBox1 the second time in a row. When I select a Folder in the ListBox1 and now Press Button1, I will be redirected to "Default.aspx". This meens that this code is running: (That meens that Session["LoginByAdmin"] == null and I have not set this to null anywhere. This is my big question how this variable can be = null here?
if (Session["LoginByAdmin"] == null)
Response.Redirect("Default.aspx");
break;
[Code]....
My code:
[Code]....
If the value is null writes out that error.How to check if the value is null? And if the value is null, I want to store + 1
I am using dropdownlist in my view page with some values which will display corresponding ID(primary key of other table) in my database.If i leave my dropdownlist blank and save it in database then its showing null parameter error. Can you explain how to use this reference type to overcome this error
View 2 RepliesI am making a website to store invoices so i can mail them to clients. So i got a table for clients, invoices and one with invoice products/services. When an invoice has no products/services added to them and it returns null i get the error "the null value cannot be assigned to a member with type System.Decimal which is a non-nullable value type."
I just started with linq. Before i always used mysql. Mostly i just had to call data from 1 table so forgive me if my linq query isn't really correct.
Dim invoices = From i In db.invoices _
Group Join p In db.products On i.id Equals p.invoiceId Into invoiceProducts = Group _
Select New With {i.client.naam, i.titel, (From iP In invoiceProducts Select iP.prijs).Sum}
i show the client's name, the title of the invoice and the total amount the clients will need to pay for products and services.
In this code snippet:
using (DataClassesDataContext myContext = new DataClassesDataContext())
{
var myEvents = (from ev in myContext.Events [code].....
So I'm thinking there must be something about the Event object that has been created for me that is causing the problem...?S
I dont know, but <%= %> doesnt allow me to enter my project namespace. Im trying to reference a static variable in another folder.
Ex: <%= Site.Web.Variable %>
I have a ASP.NET/C# web application. There is an object instantiated in the Global.asax that I'll call g_objVariable. What I would like to do is reference one of it's properties in the ASP.NET page itself, like this.
The g_objVariable's Prop1 value is: <%=AppNameSpace.Global.g_objVariable.Prop1.ToString()%>
I get it to see the reference, but it keeps telling me that due to it's protection level I can't access it. I have it set to 'internal static'. What would be the least level I could set it to, but still allow the page to access it?
I have a custom component:
[Code]....
[Code]....
I try to create a new component instance like this:[Code]....
[Code]....
I'm experimenting with validating forms in the asp.net MVC framework. I'm focusing on server side validation for the time being. I've come across an error that I'm not sure how to rectify. System.NullReferenceException: Object reference not set to an instance of an object. The code that throws the error is:
[AcceptVerbs(HttpVerbs.Post)]
public ActionResult Create([Bind(Exclude="ID")] MembersCreate mc )
{
mc.Modules = ModuleListDataContext.GetModuleList();
ViewData.Model = mc;
//Validation using ModelState
//
//
//line below errors when form field is empty
//
if ((string)mc.Member.Username.Trim() == "")
ModelState.AddModelError("Member.Username", "Username is required.");
if (!ModelState.IsValid)
return View();
try
{
// TODO: Add insert logic here
return RedirectToAction("Index","Home");
}
catch
{
return View();
}
}
When I put spaces in the field it performs exactly as i want, but if I leave the field blank and press submit I get the error. What's the best way to avoid this error and still validate blank form fields?
I have a .ascx file residing in another page which has a button on it. On click I run a select statement that accesses the textbox for a value.
However, it keeps returning a Null Exception Error. I am trying access the textbox and its text through
[Code]....
I also tried -[Code]....
I also tried -[Code]....
But none of them work. Please can someone advise me how I find the textbox and then access its text?I have looked round the forums / google and cant find a way of doing this!
I am getting the Null reference exception in
[Code]....
also when I used the Quickwatch, I get this error message.
getElementById The name 'getElementById' does not exist in the current context
I am also using Master Pages.