I have applied nested master page to some page. Now i want to bind drop downlist from value selected in dropdown list in master page of master applied to that page.
the hierarchy of pages is
mypage.aspx -> main.aspx -> inner.master
I want bind dropdown list in mypage.aspx from from value selected in dropdown list in inner.master
Is it possible filtering a list in a content page by a value set in its master page? I mean when a user clicks on a link button in master page a variable is set and then based on the value that variable, when loading a content page, a list in it is filtered?
View 1 RepliesI have a drop down list embedded in a menu panel in my master page. This ddl fetches it's list items from my SQL Server. They are:
1. Select a type --appended during page load
2. Green type -- fetched from SQL server via a datasource
3. Red type -- fetched from SQL server via a datasource
4. User Manual -- appended during page load
For the sake of simplicity my website has 4 pages. When the 'Select a type' list item is selected - the user should be taken to a general 'Introduction' page. When the 'Green type' - the user should be taken to a 'Green' page - and etc.
My project has the following repeater menu shown on the Master Page. I need this menu to remain hidden until the user logs in. How do I access from content page?
[Code]....
I created a Site.Master page for my website. On the site.Master page I created a header that holds a dropdown list of companies. I was hoping that this dropdown list would be available to all pages, however the first page I made was a page with a grid view. I wanted to use the header dropdown list as one of the parameters to fill the gridview. That option does show up. I have all of the control on that actual page available to bind to, but not the Site.Master page.
View 5 Replieswhich page need to be checked. Master or Content. I dont think there is anything wrong in the content page.
View 1 RepliesI am using Master page and Content page combination.But how can i access <body> tag and it's event (onload, onunload) of Master page in .aspx page that is not a content page.
View 12 RepliesI have a master page homeMaster.aspx and many content pages. However the situation is I have few .html pages. Now when a user clicks on a link the html page should get loaded.inside the master page. The problem is these are .html and not content page with .aspx.
View 4 RepliesI have a master page setup that is used throughout my site that is basically a header with a menu. I recently added a textbox and a button to this master page which is to be a quick search box that is available anywhere in the site. When a user enters text into the search box and hits the button, I need to load the actual content page which is used to search and show search results (which also uses this same master page), and have the text entered available so the search can be triggered automatically. Again, this search text box and button is now in my master page so it could be triggered from anywhere in the app... it serves as a convenient way to do a basic search from anywhere in my app, without having to first navigate to the actual 'search page' that already exists. You can also navigate to the actual search page, which uses the same master page, where there is many more search options.I'm thrown off by the master page arrangement, which I have not used until this project. What do I do?
View 4 RepliesI am having asp:hyperlinks in my master page, which i use as my page headers. I would just like to change the text format of the hyperlink when a content page is loaded.
the CS code for accessing the master page contents from content page?
Can I ask what this error refers to, (I have had it twice now over the last couple of days and then it goes away):
System.Web.HttpException: Content controls are allowed only in content page that references a master page.
This is followed by Stack Trace:
[HttpException (0x80004005): Content controls are allowed only in content page that references a master page.]
System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection) +9744256
System.Web.UI.Page.get_Master() +55
System.Web.UI.Page.ApplyMasterPage() +14
System.Web.UI.Page.PerformPreInit() +51
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1104
I am not using any Content Place Holder or Master Page (does the error refer to the Site.Master file because while I can see it in. Solution Explorer, I never use it. All of my aspx files look like this along the top with no reference to Site.Master:
Code:
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="register1.aspx.vb" Inherits="register1" %>
HOW TO RUN THE JAVASCRIPT FUNCTION ON PAGE ONLOAD EVENT IN CONTENT PAGE OF MASTER PAGE.?
means i have masterpage and the content page of master page namely default.aspx in vb.net
My problem was that .
i wanna run javascript function in Default.aspx and i have called the function
body onload in master page..
when i run my website it shows the error
"" Microsoft JScript Runtime Error : Object Expected ""
Following is the structure of the pages in application
[Code]....
Suppose the user is on ..../paycheck.aspx which is the content page. But when ...../paycheck.aspx loads, "lnkDynamic" properties "Text and PostBackUrl" must be set. Which events should be handled .....
I want to call a javascript method during page load. I am using application.master of the sharepoint server 2007 as the master page . In the content page i want to call a custom method named OnLoadFun() during loading the content page. I have written the function inside script tag in the PlaceHolderAdditionalPageHead id section of the content page.
[Code]....
How do i call the OnLoadFun method so the i is being called onload time. i tried putting window.onload=OnLoadFun surrounded by script tag within the PlaceHolderMain content section.
I have a javascript function on my Master page, how do I access it with a dropdownlist of a content page. Not from codebehind, I can do that, but from the control itself such as the onSelectedIndexChanged event.
View 11 Replieshow to remove master page prefix from control ID after rendering content page
i m using master page in my web application, i am using a java script that works on one of my div id and i am genrating div at run time using C# code, problem is that one one of my content page rendred a prefix ct100 attached on that div,
How can i remove that prefix from my server side control (assume panel) id
to whom it may concern,
I wish to access a public property in a master page from a nested content page
is there anyway to do that without using "master type"
i found this link
http://www.velocityreviews.com/forums/t110057-accessing-properties-from-nested-master-pages.html
but i dont understand what "companywide" is
((CompanyWide)this.Master.Page.Master).HtmlTitle = "now it is working";
i dont want to use "MasterType" i would rather cast..
I have a master page with a form on it. It's a people search form. When the user clicks on the search button it goes to the search results page that uses the same master page. With the code below I get the info off the master of the current page. Howdo I grab that info from the first page?
Here's the code:
Master page:
< FORM id=formEmpSearch method=post action=~/About/peopleSearch.aspx runat="server">
< asp:TextBox style="WIDTH: 153px; HEIGHT: 12px" id=txtSearchName onfocus="this.value=''" runat="server" CssClass="searchBox">
Master Code Behind page:
Imports System
Imports System.Web.UI
Imports System.Web.UI.WebControls
Partial Class mstrIntranet
Inherits System.Web.UI.MasterPage
Public Property mSearchName()
Get
Return txtSearchName.tex
End Get
Set(ByVal value)
txtSearchName.text = value
End Set
End Property
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
txtSearchName.Text = "People Search"
End Sub End Class
Search Results Code Behind page:
Partial Class PeopleSearch2
Inherits System.Web.UI.Page
Public SearchName As String
Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim mpTextbox As TextBox
mpTextbox = CType(Master.FindControl("txtSearchName"), TextBox)
SearchName = mpTextbox.Text
Wondering if it is possible to access a master page's hidden field (ex. <Input Type="Hidden" ID="TestHiddenField" Value="testValue"/>) From a Content Page's C# Pack CS Page.If it is possible, How do I go about doing so? I have tried:
PreviousPage.Master.FindControl("[TestHiddenField]") but no .Value attribute and no luck in general.
I have a MasterPage where I use the menu control. Clicking a menu item loads a new content page. That part works fine.
I would like to use staticselected style to change the look of the selected menu item. However, when the new content page loads, the staticselectedsyle formatting does not work.
I have a user control in the master of my website and I want change some property of that control from the content page.
View 3 RepliesHere is my situation: I have a user control that has a menu in it. This user control sits on my master page. It is my main navigation menu for my application. I am having an issue where, on one of my pages, users seem to be leaving the page before committing all changes to the database, which results in a loss of data. So what I want to accomplish is - if the user is leaving this page and the data has not been saved yet, I want to prompt the user and say something like "The information is not yet saved, are you sure you want to leave this page" in a modal popup. So my approach is this: In my menu user control, create an event handler called MenuClicked that is raised when the menu web control's (in the user control) MenuItemClicked is raised, I raise my custom MenuClicked event. Then on my master page, I can catch this event in NavMenu_MenuClicked. My problem is - I need to catch this event in my content page, not the master? Am I approaching this correctly?
View 2 RepliesThe problem with my web application is when ever i load the home page - The master page as well as content page loads ---This seems fine but when i navigate thorugh the website which have the same Master page but diffrent content page .... the master page loads again. What i want to do is ..I want to keep the master page intact and only the content page loads. How can I accomplish it..
View 3 RepliesI have very simple validation on the aspx page (highlighting not valid textbox), and it works perfectly. But when I try to work with this page using MasterPage, I've got an error - "Object reference not set to an instance of an object." (with reference to the line "aControl.BackColor=Drawing.Color.White" - underlined).
Here is the code of the content page.
<%@ Page Title="" Language="VB" MasterPageFile="~/MasterPage.master" CodeFile="testValid.aspx.vb" Inherits="testValid" %>
[Code].....
I have one master page that is used to gather information from a user. It contains asp.net labels and textboxes within a table. For example, the master page contains fields for Name , Phone, Address, etc.
There are content pages that are created to add to the information that needs to be gathered. For example, the content page, Loan Application, could ask for Loan Amount, LTV, etc.
In addition to this, certain content page forms do not need to show a particular master page field. For example, the content page may not need to ask for Phone.
The table rows are stored as public properties in the master page so I can hide them in the content page code behind.
public bool HomePhoneRow
{
set { trHomePhone.Visible = value; }
get { return trHomePhone.Visible; }
}
So, in the content page code behind, I have this:
Master.HomePhoneRow = false;
The functionality works perfect, but I don't like how the space is reserved on the page. You can tell that a row was removed. I've tried style="border-collapse:collapse" on both the <table> and <tr> elements. I've also tried to set the row height as a public property and alter that.